- Home
- Equipment
Refine by
Met Xprt Equipment & Supplies
68 equipment items found
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Met One 370 and 380 series all-metal rain gauges provide accurate precipitation measurement of rain and/or snow in all environments using a tipping bucket mechanism. The economical tipping bucket design allows accurate, repeatable measurements, requiring no regular maintenance, and are constructed out of corrosion-resistant materials, featuring a Teflon-coated bucket catch to help ensure a ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
Met One precipitation gauges are high quality, reliable instruments that measure rain and/or snow. The tipping bucket allows for accurate, repeatable measurements and low maintenance. When a precise amount of precipitation is collected in one side of the bucket, gravity tips the assembly and activates a reed switch. A momentary electrical contact closure is provided for each increment of ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The NEW 034E Wind Sensor combines wind speed and direction measurements in a single sensing unit. It installs in minutes and provides accurate, long-term, continuous monitoring in hostile environments. The sensor uses a quick-connect sensor cable which may extend hundreds of feet without affecting measurement ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The 010C Wind Speed Sensor provides accurate and detailed information on horizontal wind speed. The lightweight three-cup anemometer is used in virtually all applications where fast response and low starting threshold(s) are of paramount importance. The 020C Wind Direction Sensor provides azimuth data for use in micrometeorological measurements related to operational studies and research. The ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Met One 370 and 380 series all-metal rain gauges provide accurate precipitation measurement of rain and/or snow in all environments using a tipping bucket mechanism. The economical tipping bucket design allows accurate, repeatable measurements, requiring no regular maintenance, and are constructed out of corrosion-resistant materials, featuring a Teflon-coated bucket catch to help ensure a ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The 092 Barometric Pressure Sensor measures absolute atmospheric pressure and converts it into a linear, proportional voltage, using digital computer technology. The 092 features robust, low maintenance construction that will withstand a wide range of adverse weather conditions, and consistently collects reliable barometric pressure data. The standard range of the 092 is 600 to 1100 hPa, which ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The AIO 2 Sonic Weather Sensor is a complete, high performance weather sensor using Met One Instruments’ proven 2D sonic technology. This technology provides reference grade accuracy without moving parts and includes a built-in compass used for automatic magnetic north alignment of the wind sensor. The temperature and humidity elements are integrated into an IP65 sealed module with a quick ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The 083F Relative Humidity Sensor is a highly sensitive and stable temperature measurement tool that provides outstanding accuracy. It is reliable in the full range of relative humidity conditions, from 0-100%, performing equally well in meteorological, industrial, laboratory and other demanding settings. Model 085A is a combined relative humidity/temperature sensor. Both sensors can be used with ...
Premium
Manufactured by:Envira based inLlanera, SPAIN
Nanoenvi MET is an IoT weather station that autonomously and autonomously measures multiple climate parameters in any outdoor environment using a single compact and portable device. The Nanoenvi MET professional portable outdoor weather station allows you to collect real-time data on atmospheric and climatic conditions in a fully automated manner without requiring direct intervention. This ...
Premium
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Met One 370 and 380 series all-metal rain gauges provide accurate precipitation measurement of rain and/or snow in all environments using a tipping bucket mechanism. The economical tipping bucket design allows accurate, repeatable measurements, requiring no regular maintenance, and are constructed out of corrosion-resistant materials, featuring a Teflon-coated bucket catch to help ensure a ...
Manufactured by:Met-Chem, Inc based inCleveland, OHIO (USA)
Air operated diaphragm pumps are used with filter presses to pump sludge from the bottom of the sludge holding tank into the filter press. These pumps are ideal because they can handle the slurry which is generally about the consistency of a ...
Manufactured by:Met-Chem, Inc based inCleveland, OHIO (USA)
Inclined Plate Lamella Clarifiers are designed to remove solids from water. They are used in a wide variety of Wastewater Treatment Applications, including Metal Finishing Wastewater Treatment. The Total Suspended Solids (TSS) in the wastewater will naturally settle over time due to gravity, but this process can be sped up and improved by having Inclined Plates. The inclined plates provide a ...
Manufactured by:Met-Chem, Inc based inCleveland, OHIO (USA)
8 GPH, Used Samsco Evaporator Model 400, SWE-II, 316 Tank & Heat Exchanger, Natural Gas Burner, PLC Control Panel w/ Condensing System that includes Chiller & Condensing Skid ...
Manufactured by:Met-Chem, Inc based inCleveland, OHIO (USA)
J-201 Batch air dryer, JMate Dryer designed to be used in conjunction with a small sludge dumpster, volume reduction range from 2:1-5:1, weight reduction from water loss of filter cake range 20-80%, stainless steel of all wetted parts including air scrubber, Voltage: 240VAC, 1 phase, 60 ...
Manufactured by:Met-Chem, Inc based inCleveland, OHIO (USA)
24-60 GPM Used Parkson Dyna Sand Filter, 12 square feet of filter area, fiberglass construction. Model SF-12. Dimensions: 164” H x 74” W ...
Manufactured by:Marsulex Environmental Technologies (MET) based inPensacola,, FLORIDA (USA)
Proprietary to and Patented by Marsulex Environmental Technologies. In the Ammonium Sulfate (AS) process, the absorption of SO2 is accomplished with either anhydrous or aqueous ammonia and converts the captured SO2 into a high value crop fertilizer. This advanced technology provides a unique solution enabling power generators to achieve regulatory compliance producing significant revenues by the ...
Manufactured by:Marsulex Environmental Technologies (MET) based inPensacola,, FLORIDA (USA)
In sodium scrubbing, a solution of sodium hydroxide, sodium carbonate or sodium bicarbonate absorbs the SO2 from the flue gas. The SO2 reacts to form sodium sulfite and sodium bisulfite which are dissolved in solution. Part of all of the sulfites can be oxidized to form sodium sulfate. Sodium scrubbing differs from lime or limestone-based systems in that no solid waste is produced. Because of the ...
Manufactured by:Marsulex Environmental Technologies (MET) based inPensacola,, FLORIDA (USA)
Advanced, high-efficiency particulate collection with custom-engineered pulse jet fabric filters. MET’s Buell APC division provides high particulate collection efficiency systems in the form of customized intermediate pressure, long-bag pulse jet fabric filters. This technology provides solutions that meet our client’s needs with Medium Pressure technologies. Our PJFF technologies ...
Manufactured by:Marsulex Environmental Technologies (MET) based inPensacola,, FLORIDA (USA)
Our Electrostatic Precipitator technology provides enhanced performance and reliability through proven, reliable, cost effective and cutting edge designs that ...
Manufactured by:Marsulex Environmental Technologies (MET) based inPensacola,, FLORIDA (USA)
Buell APC offers replacement parts for many OEM ESP designs emitting electrodes. Our standard emitting electrode is designed for long life with minimum tensile strength specification of 216,000 psi. Shrouded hook ends are manufactured with the electrode wire inserted through the shroud prior to forming the hook thus eliminating the requirement for ...