- Home
- Equipment
Refine by
Nichols Xprt Equipment & Supplies
16 equipment items found
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Nichols Tillage Tools offers a wide variety of cultivation pieces to offer choice and ensure the success of every one of our customers. Each part is constructed with the highest quality material using cutting-edge manufacturing technology. For years, Nichols has been known for making the longest lasting tillage tools on the market, and our goal is to continue that tradition for years to come. ...
Manufactured by:Barber-Nichols based inArvada, COLORADO (USA)
BN can custom design a small, fast, and lightweight aerospace pump for your application. The model BNP-21-000 shown above uses a canned motor for a hermetic design water pump that runs a partial emission impeller directly driven by a 28 volt brushless DC motor. Many other similar designs are available for a wide range of fluids and performance. BN also provides a standard line of time-tested ...
Manufactured by:Barber-Nichols based inArvada, COLORADO (USA)
Axial Flow Impulse Turbines achieve the full pressure ratio across the nozzle and capture the kinetic energy via the turbine blades. Impulse turbines are ideally suited for applications where you need to keep the speed of the machine and the tangential velocity of the rotor low. In other words, they are often used in a lower specific speed range. For power generation systems, it is advantageous ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Covering Disc Assembly; 8" x 2.6mm; 204 bearing for 5/8" bolt; Furnished with dust cap; Applications: Case-IH (Covering ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Double-end chisel for chisel plows; 5/8" x 2" x 17"; 1/2" holes on 2-1/4" ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Fertilizer knife; 1/2" x 2-1/2" x 16"; Hole and slot for 1/2" bolts on 1-3/4" to 3" centers; Chromium carbide point with 2" wings and tube protector; One 1/4" Sch 40 pipe to fit 1/2" ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Fertilizer knife; 3/8" x 2-1/2" x 13"; Hole and slot for 1/2" bolts on 1-3/4" to 3" centers; Chromium carbide point and tube protector; One 1/4" Sch 40 pipe to fit 1/2" ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Bubble Coulter Blade; Dia. = 17.00; Thickness = 4.00mm; Pilot hole = 2.125 Dia.; Bolt circle = 4.750; Hole size = 0.531; Number of holes = 5 ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
The Nichols heel sweep is a revolutionary design that allows both sweeping and chiseling to be done simultaneously. This combination results in breaking up the hardpan to encourage better root penetration and absorbtion of moisture. Manufactured from 1/4" hardened steel, Heel Sweeps are available in 16" and 18" widths and will accept any 2-1/4" hole pattern chisel to mount on top. We recommend ...
Manufactured by:Barber-Nichols based inArvada, COLORADO (USA)
Barber-Nichols (BN) has the experience to design, produce, and test aerospace compressors and fans for your most demanding applications. BN can design custom, or modify existing, compressors and fans to accommodate a wide variety of applications. Compressors and fans are conceptually designed using Meanline and streamline software. BladeGen® is then used to generate the three-dimensional ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
This tool makes installing and removing Nichols Quick Change sweeps and chisels a breeze by directing the force of a hammer blow more effectively. Made to work with 3/16" through 3/8" thick QC sweeps and chisels. ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Plain Disc Blade; Dia. = 16.00" Thickness = 3.00mm; Pilot hole = 1.500 Dia. ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Vertical Tillage; Soil Razor Disc Blade; Dia. = 20.00" Thickness = 5.00mm; Pilot hole = 1.125 X 1.250 Sq. x ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Ripper Point; 1-1/4" x 2" x 6"; With chrome cap.; Applications: Big Ox ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Furrower; 1/4" x 7" bottom & 9" wing; Hole and slot for 7/16" plow bolt and 1/2" carriage bolt on 1-1/4" to 2-1/4" ...
Manufactured by:Nichols Tillage Tools, Inc. based inSterling, COLORADO (USA)
Fertilizer knife; 1/2" x 2-1/2" x 16"; Hole and slot for 1/2" bolts on 1-3/4" to 3" centers; Chromium carbide point and tube protector; One 1/4" Sch 40 pipe to fit 1/2" ...