- Home
- Equipment
Refine by
Nordic Xprt Equipment & Supplies
72 equipment items found
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Nordic Air Filtration's Conical and Cylindrical filter cartridge sets come in a variety of configurations: Conical/Cylindrical, Conical/Conical, and Cylindrical/Cylindrical and are ideal for gas turbine air inlet applications. These common configurations are primarily used in pulsing systems, but they can also be installed where the pulsing system has been disabled. The Conical and Cylindrical ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Nordic Air Filtration's Cylindrical Filter Cartridge is suitable for Gas Turbine air inlet housing. It can be equipped with any one of Nordic Air Filtration's high-quality filter media making it suitable for all operating environments throughout the world. The Cylindrical Filter Cartridge can be installed horizontally or vertically and can be used in pulsing or static systems. Our vast gas ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
The Cylindrical ABS Filter Cartridge is partially recyclable / incinerable. This filter configuration features non-corrosive, non-metallic end caps and inner mesh particularly suitable for corrosive environments. It is installed horizontally. It is suitable for Gas Turbine air inlet housing and can be equipped with any one of Nordic Air Filtration high-quality filter media making it ...
Premium
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Enhanced filter performance by adding strength and improved airflow. Dimpling technology creates small, evenly spaced indentations on the filter media surface to improve dust cake release, airflow, and filter longevity. These dimples reduce contact between the media and the dust cake, minimizing clogging and allowing for better air flow. Dimpling also prevents pleat pinching—where pleats ...
Manufactured by:Nordic Technologies A/S based inBeder, DENMARK
Nordic Technologies can provide expert advice to customers looking for desalination plants ranging from 200 m3/day up to 6,000 m3/day production capacity. The plants are produced by partners to Nordic technologies based on our specifications. The desalination plants are modular and very scalable and built in to standard container ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Liquid-to-air heat pumps, also known as water to air heat pumps, harvest their heat from deep below the ground, and distribute it throughout the house in the form of hot air. In the summer, these heat pumps reverse the process and cool your ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
The Lamella lamella separator was developed by the Axel Johnson Institute in Sweden during the 1970s and has become a world leader in lamella technology. Lamella separators are designed to maximise sedimentation in the smallest possible space. Lamella’s popularity is due to several factors; one of the most important being the well-proven design that contributes to the excellent safety and ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
The process we call biostabilisation is mainly used before other types of treatment at water purification plants. This process is completely biological and uses naturally occurring bacteria in the inflowing water to reduce odour, taste and levels of ammonium, iron, manganese or algal ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
This process is based on a fundamentally more conventional treatment method – chemical precipitation and flocculation, followed by sedimentation and filtration. The difference is that it combines much more compact lamella sedimentation with continuous sand filters, allowing higher flow rates than conventional ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
Nordic water has today two different well proven technologies for micropollutant reduction: 1) Based on adsorption or to some extent biological removal with Granular Activated Carbon (GAC). 2) Powdered Activated Carbon ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
Mill scale forms during steel production. It is a thin oxide coating that is created when steel is hot-rolled. When the steel is cooled down with water during the rolling process, the mill scale breaks off. The cooling water is re-used over and over again, which means that mill scale and oil residue particles need to be separated off. Mill scale often also contains valuable alloying elements such ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
The DynaSand filter provides the basis for what we call contact filtration, this is the most energy efficient and cost efficient way to treat surface waters with less space required of low to moderate level of turbidity or cloudiness, no matter is to produce municipal drinking water or industrial water. This process involves the lowest amounts of chemical precipitants, which being added just ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Using a standard geothermal ground loop, our high-temperature hot water heat pump (WC Series) delivers up to 160°F (70°C) hot water for high-temperature hydronic heating systems. We accomplished this by using a two-step system involving two refrigerant circuits and two compressors. This heat pump would be ideally suited for homes retrofitting from hot water boilers, with hot water ...
Manufactured by:Nordic Semiconductor ASA based inTrondheim, NORWAY
The nRF9131 Mini SiP is a powerful solution perfect for DECT NR+ applications. It also supports cellular operations utilizing the same LTE stack as nRF9161. The nRF9131 will simplify traditional chipset-based designs, making it ideal for high-volume cellular IoT applications. With lower integration compared to the nRF9161 SiP, the nRF9131 offers a lower Bill of Materials (BOM). However, it's ...
Manufactured by:Nordic Semiconductor ASA based inTrondheim, NORWAY
The nRF9161 sets a new standard for highly integrated System-in-Package (SiP) solutions, specifically designed for cellular IoT and DECT NR+ applications. Leveraging low power LTE technology, advanced processing capabilities, and robust security features, the nRF9161 offers unparalleled performance and versatility. It offers enhanced capabilities compared to its predecessor (nRF9160), including ...
Manufactured by:Hydro Solar Innovative Energy based inLachine, QUEBEC (CANADA)
The Nordic Liquid-to-air heat pumps is a water to air heat pump that harvests their heat from deep below the ground, and distributes it throughout the house in the form of hot air. In the summer, these heat pumps reverse the process and cool your home. This type of heat pump is commonly used in residential renovation projects when retrofitting from other air duct systems. The R Series is ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
The Nordic air to air heat pump is an air source heat pump designed to work in a residential setting. Since the heat of heat for this heat pump is the air, there is no ground loop required, which means this system is very cost effective to ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Our pool conditioner series (PC Series) heat pump is an indoor pool heat pump, which means it’s basically a high-efficiency heat recovery heat pump. This heat pump works by cooling and dehumidifying the pool area and then rejecting the heat back into the airstream, into the pool, or to an additional external outdoor condenser ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Hydronic air handlers, also known as hydronic fan coils or hot/chilled water fan coils, are devices that take the heat from hot water and transfer it to a forced air duct. This is done with a water-to-air heat exchanger, and a blower. Forced air cooling can also be accomplished from chilled water in the same manner. These units are often used to provide air conditioning in buildings that have ...
Manufactured by:Nordic Lab based inVaerloese, DENMARK
Low energy consuming chest freezer for cold storage of a variety of samples, including pharmaceutical, biological, and other commonly used laboratory materials between −25°C and −45°C. Our LT C200 is the perfect choice for long term storage and for applications where the samples don’t have to be accessed all the time. It can be placed in a central storage facility where ...