- Home
- Equipment
Refine by
Pdi Xprt Equipment & Supplies
6 equipment items found
Manufactured by:Pile Dynamics, Inc. (PDI) based inCleveland, OHIO (USA)
The PIR-Q is an Automated Monitoring Equipment that assists in the correct installation of augered cast in place (ACIP) / continuous flight auger (CFA) and drilled displacement piles by displaying target versus actual poured concrete volume in real ...
by:PDI a.s. based inKlícany, CZECH REPUBLIC
Our system consisting of a medium-temperature rotary reactor continuously connected to a high-temperature reactor is even able to process materials that cannot otherwise be used, producing either materials or energy. This “gasification island” can be used, for example, to process unrecyclable plastics (plastic composites), non-metal waste from car crushers, sludge that cannot be used ...
Manufactured by:Pile Dynamics, Inc. (PDI) based inCleveland, OHIO (USA)
Evaluation of the entire cross-section and the entire length of the deep foundation element measuring heat generated by curing cement to assess the quality of drilled shafts/bored piles, augered cast in place (ACIP)/continuous flight auger (CFA) or drilled displacement piles, slurry walls, barrettes, soil nails, and jet grouted ...
Manufactured by:Pile Dynamics, Inc. (PDI) based inCleveland, OHIO (USA)
Thermal Integrity Profiling (TIP™) is an award-winning technology that utilizes heat generated by curing of concrete to assess the integrity and quality of drilled shafts, augured cast in place (ACIP) piles and other concrete foundations. The critical time for recording TIP™ data occurs during the hydration process, until peak concrete temperature is reached. Temperatures should be ...
Manufactured by:Pile Dynamics, Inc. (PDI) based inCleveland, OHIO (USA)
The Pile Driving Analyzer® (PDA) system is the most widely employed system for Dynamic Load Testing and Pile Driving Monitoring in the world. High Strain Dynamic Load Tests, also called PDA tests, assess the capacity of several piles in a single day. Pile Driving Analyzer systems also evaluate shaft integrity, driving stresses, and hammer energy when monitoring installation. If you plan to ...
Manufactured by:Pile Dynamics, Inc. (PDI) based inCleveland, OHIO (USA)
The Pile Integrity Tester (PIT) may be used on most concrete or wood foundations. The PIT may also be used to test piles integral in the structure, such as those supporting existing bridges or towers, and may assess their length. The PIT performs wave equation-based non-destructive foundation investigations known as Low Strain Impact Integrity Tests or Low Strain Dynamic Tests. These test may be ...