- Home
- Equipment
Refine by
Pf10 Xprt Equipment & Supplies
9 equipment items found
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
Among the vacuum evaporators/concentrators that exploit thermal energy powered by hot water or steam (or diathermic oil) during the first evaporation stage, the ETR W model has been developed to obtain more concentrated waste and to treat encrusting solutions. The employment of an automatic scraper, that keeps the exchange surfaces of the vertical tank clean, allows to obtain thicker concentrates ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
installing a photovoltaic system in your company is still worthwhile and an industrial system is still the ideal and optimal solution for the production of clean and free energy to satisfy the company's electricity needs, benefiting from energy that will not be counted in the bill, increasing energy saving. Furthermore, it should be added that with the installation of an industrial plant in a ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
The ETV model is a vacuum evaporator/concentrator with heat exchanger submerged in the fluid to be processed or, on customer’s demand, with an outer shell and tubes exchanger. Moreover, PF10 is the sole manufacturer of exchanger with submerged plates. All PF10 evaporation plants can be manufactured in AISI 316 (std. version), duplex, super duplex, according to the characteristics of the ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
The ETW model is a vacuum evaporator/concentrator with heat exchanger submerged in the treated fluid or, at customer’s request, with an outer shell and tubes heat exchanger. Alternatively, PF 10 can install special submerged plates heat exchangers. These vacuum evaporators/concentrators exploit during the evaporation phase the thermal power supplied by hot water or steam and for the ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
The EDH model is an evaporator of high energy efficiency. The power is supplied through a heat pump that employs a particular freon and exploits the thermal power of the fluid, evaporated during the first stage of evaporation, to supply a second stage of evaporation. This model allows to reduce the electric consumption of 40% than the similar single effect ETV model. The construction materials of ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
Crio Crystallizers are batch working units, that use the cooling technique to reach the solubility limit, separate the processed solutes, by obtaining solid crystals of waste. The cooling process creates saturation on the surface of the heat exchanger and the crystals are removed through an automatic scraper. The power used to cool the solution is supplied by a refrigeration system. ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
The Plant Division designs and builds plants for the treatment of water and gaseous streams, ultra- and nano-filtration systems for process fluids and waste water. ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
The ETD model takes advantage of the crystal precipitation when the solute overcomes the solubility limit. In order to obtain these outcomes, the plant has no submerged heat exchanger, but uses jacked exchangers to heat the fluids. The boiling tank is horizontal and the concentrate can reach the consistency of mud. The discharge occurs manually through the opening of the front ...
Manufactured by:PF10 Impianti Industriali based inCapriate S., ITALY
The ETW DE model is an evaporator of high energy efficiency. These evaporators, as the ETW ME series, exploit the thermal power produced by hot water or steam (or diathermic oil) during the evaporation phase and the one produced by water coming from closed circuit dry-coolers or evaporation towers during the condensation phase. Moreover, the thermal energy produced by the condensate during the ...