- Home
- Equipment
Refine by
Pps Xprt Equipment & Supplies
33 equipment items found
Distributed by:USAlliance Trade Group LLC based inSilver Spring, MARYLAND (USA)
We have pp buckets in bulk available ...
Manufactured by:PPS A/S based inBirkerød, DENMARK
Tablet coating is a critical process in pharmaceutical and nutraceutical manufacturing, involving applying an outer layer to tablets, pellets, and micro granules. This process, conducted in a rotating drum within a controlled atmosphere, serves multiple functions including enhancing taste, modifying appearance, protecting physically, or controlling dissolution rates. IMA, a leader in high-tech ...
Manufactured by:PPS A/S based inBirkerød, DENMARK
The main concern of the pharmaceutical packaging market has always been the integrity of the drug, and, in the case of parenteral dosage forms, its sterility. XTREMA indeed embodies the latest technological breakthrough in aseptic ...
Manufactured by:PPS A/S based inBirkerød, DENMARK
Marked by a genuinely impressive real output, this “large size” model produces many tens of thousands of filled tubes each production shift, with the benefit of a triple nozzle configuration that has been continuously improved and upgraded along the ...
Manufactured by:BELL S.r.l. based inReggio Emilia, ITALY
Spaccalegna orizzontale con piedi pieghevoli Potenza 7 tons | Capacità di taglio 52 cm | Motore elettrico 230V Horizontal log splitter with folding feet Thrust 7 tons | Log Capacity 52 cm | Electric motor ...
Manufactured by:Powder Process-Solutions based inChanhassen, MINNESOTA (USA)
PPS bag dump stations offer bag dump design for manual introduction of product into the process stream. By customizing the size and specifications to the installation site and product being processed, PPS can ensure a clean, safe and dust-controlled environment. PPS offers modularly designed bag dumps which promote maximum flexibility and customization to ensure that the correct bag dump station ...
Manufactured by:Powder Process-Solutions based inChanhassen, MINNESOTA (USA)
PPS bin vent filters are an effective solution for dust control problems in bins, hoppers, and silos. A bin vent will separate dust particles from the conveying air, either discharging the unwanted dust or reclaiming it for use ...
Manufactured by:PP Systems International, Inc. based inAmesbury, MASSACHUSETTS (USA)
The CIRAS-4 is the fastest and most accurate mobile system for simultaneous leaf gas exchange & chlorophyll fluorescence measurement. Its small system volume is optimized for high-level field performance and is the perfect choice for the measurement of: Photosynthesis, chlorophyll fluorescence, soil respiration, canopy assimilation, insect respiration, rapid A/Ci curves using our ...
Manufactured by:PP Systems International, Inc. based inAmesbury, MASSACHUSETTS (USA)
The TARGAS-1 Portable Photosynthesis System is designed for basic research and features a very high technical specification – one that rivals some of our competitor’s “High-Level Research” instruments. It is an extremely user-friendly instrument making it an ideal choice for teaching purposes and can be used in both the laboratory and field. ...
Manufactured by:Powder Process-Solutions based inChanhassen, MINNESOTA (USA)
Conveys high capacities over longer distances. Smaller convey line diameters. Reduced average convey velocity. Reduced abrasion and particle degradation. Compressed air driven. Suitable for single source multiple destination systems. Mobile sender units and pre-weighing options. Continuous conveying option with two ...
Manufactured by:Powder Process-Solutions based inChanhassen, MINNESOTA (USA)
Most common and versatile system for most applications. Blower driven. Simple rotary valve/airlock feeding device. Low pressure convey line with simplified fittings and couplings. Continuous operation. Convey rate adjustable via variable speed drive for dosing. Suitable for single or multiple source-multiple destination systems. Ideal for multiple hopper weigh batching ...
Manufactured by:Powder Process-Solutions based inChanhassen, MINNESOTA (USA)
Dehumidifiers and aftercoolers are utilized in process air and pneumatic conveying systems to control both the moisture level and temperature of air that comes into contact with moisture and heat sensitive products. Dehumidifiers use chilled water or refrigerant heat exchange coils to lower the incoming air temperature below the dew point at appropriate face velocities. This allows for the ...
Manufactured by:PP-L Biosafety based inSleaford, UNITED KINGDOM
The WR Air Decontamination Unit is a sophisticated ultraviolet device designed for smaller spaces, using UV-C technology to enhance indoor air quality effectively. Its operational design integrates into the natural convection patterns within a room, allowing it to disinfect continuously by targeting the upper room air where warmer air, and potential contaminants, tend to accumulate. The unit is ...
Manufactured by:PP-L Biosafety based inSleaford, UNITED KINGDOM
The IDEAL - H14 Medical Grade HEPA Filter is engineered to provide efficient air cleaning solutions particularly suited for environments with high demands for air purity. Manufactured in Germany, this device offers a clean air flow rate of up to 810 cubic meters per hour, making it a reliable choice for mitigating airborne virus transmission risks such as those posed by coronaviruses. Its ...
Manufactured by:Powder Process-Solutions based inChanhassen, MINNESOTA (USA)
Positive displacement blower packages are provided as a component or as an integral part of a PPS provided system. For over 30 years, we have been providing pressure and vacuum blower packages to the food processing industry. The blower package, be it a pressure or vacuum system, dilute-phase or dense phase, provides the motive for air delivery of food products through convey lines. Our Process ...
Manufactured by:PP Systems International, Inc. based inAmesbury, MASSACHUSETTS (USA)
The popular SRC-2 Soil Respiration Chamber is the industry standard for rapid, accurate survey measurement of soil CO2 efflux. The lightweight chamber is constructed of rugged PVC with a convenient handle for placement on the soil surface. A stainless steel ring provides a good seal on the soil surface or on collars.* A built-in temperature sensor measures air temperature near the soil surface a ...
Manufactured by:P P Aquatech Pvt Ltd. based inNew Delhi, INDIA
Business Type : Manufacturer, Exporter, Retailer, Wholesaler. Brand : PP Aquatech. Material : Cast Iron. Motor Rating : Up to 25 Kw. Fan Speed : 1000-2000 Rpm. Blower Type : Centrifugal Blower, Roots Blower. Color : ...
Manufactured by:P P Aquatech Pvt Ltd. based inNew Delhi, INDIA
Application : Aquaculture Fish Farm. Motor : 1 kw. Oxygenate Capability : 0.47 (kgO2/h). Type of Aerator : Diffused Aerations. Active surface area : 0.0375 sqm. Air Flow Rate : 2. 5 - 5. 0 Cum/hr. Flow Range : 0 -12. 0 Cum/hr. Make : Pp Aquatech. Operating Temperature Range : 35 Degree C. Shape : Disc Type. Size of Bubble : 1. 5 Mm - 2. 0 Mm. Size : 24 Inch. Temperature Tolerance : Max 85 Deg C. ...
Manufactured by:P P Aquatech Pvt Ltd. based inNew Delhi, INDIA
Business Type : Manufacturer, Exporter, Retailer, Wholesaler. Model/Type : PPA. Installation Service : Yes. Color : ...
Manufactured by:P P Aquatech Pvt Ltd. based inNew Delhi, INDIA
MOC : EPDM. Flow : 10 Cum/hr. Shape : Disc. Size : 80 mm Diameter, 150 mm Diameter. Size of Bubbles : 4.0 mm to 5.0 ...