- Home
- Equipment
Refine by
Pergan Xprt Equipment & Supplies
5 equipment items found
Manufactured by:Pergan Hilfsstoffe für industrielle Prozesse GmbH based inBocholt, GERMANY
PEROXAN CND is used for high pressure polymerization of ethylene in both autoclave and tubular processes, usually in combination with other peroxides of varying degrees of activity. Temperature range: 130 to 170°C. Light-off temperature at 2300 bar: 135°C. Polymerization of vinylchloride: PEROXAN CND may be used in polymerization and copolymerization of vinylchloride. Temperature range: ...
Manufactured by:Pergan Hilfsstoffe für industrielle Prozesse GmbH based inBocholt, GERMANY
Mixture of Acetylacetone peroxide and tert-Butyl hydroperoxide Solution in diacetone alcohol. PEROXAN A-25 M is used for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators. PEROXAN A-25 M has been developped for the cure of thick GRP. In comparison to PEROXAN ME-50 L and PEROXAN A-40 L, PEROXAN A-25 M shows a lower peak exotherm in these ...
Manufactured by:Pergan Hilfsstoffe für industrielle Prozesse GmbH based inBocholt, GERMANY
PEROXAN DC may be used for the polymerization and copolymerization of styrene. In a mass process PEROXAN DB can be used to increase polymerization rates. Polystyrene is made flame retardant by the use of halogen-containing additives such as hexabromocyclododecane (PERGASAFE HBCD). PEROXAN DC may be used as a synergistic coagent in combination with PERGASAFE HBCD to produce flame retardant ...
Manufactured by:Pergan Hilfsstoffe für industrielle Prozesse GmbH based inBocholt, GERMANY
1,1,3,3-Tetramethylbutyl peroxyneodecanoate. 90%, Solution in odorless white ...
Manufactured by:Pergan Hilfsstoffe für industrielle Prozesse GmbH based inBocholt, GERMANY
PEROXAN A-40 L is used for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators. With the curing system PEROXAN A-40 L in combination with a cobalt accelerator a much faster speed of cure may be achieved than with curing systems based on a MEKP plus cobalt accelerator. Normally, the gel times with PEROXAN A-40 L are comparable to those with ...