- Home
- Equipment
Refine by
Pitbull Xprt Equipment & Supplies
10 equipment items found
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The McElroy PitBull® 26 model fusion welding machine is purposed for not only fusing 2” IPS to 6” DIPS polyethylene pipes but also ells, tees, and additional fittings. When using the machine to fuse pipes made from other thermoplastic materials, consult the fusion procedures listed by the pipe manufacturer for the correct joining ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
Class: Submersed solids handling. Construction: Carbon Steel. Capacity: 0-25 gpm [95 lpm]. Discharge Pressure: 0-100 psi [6.9 Bar]. Max Solid: 2” [5 ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
Class: Submersed solids handling. Construction: Carbon Steel. Capacity: 0-50 gpm [189 lpm]. Discharge Pressure: 0-100 psi [6.9 Bar]. Max Solid: 3” [7.6 ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
Class: Submersed chemical and solids handling. Construction: Stainless Steel. Capacity: 0-115 gpm [435 lpm]. Discharge Pressure: 0-100 psi [6.9 Bar]. Max Solid: 2” [5 cm]. ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
The models S2C (steel) and S2S (316SS) are outstanding, low flow sump pumps. They will operate reliably in difficult sump environments and feature the fully automatic, AP200 pneumatic control panel. Solids capacity on these units is a full 2' diameter, which allows them to easily handle sump debris, whether stringy and fibrous or hard and abrasive. The S2 can pump them all, even at low flow ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
Class: Submersed solids handling. Construction: Carbon Steel. Capacity: 0-50 gpm [189 lpm]. Discharge Pressure: 0-100 psi [6.9 Bar]. Max Solid: 3” [7.6 ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
The model S2V is a nonmetallic submersible pump designed to operate reliably in difficult sump environments. It is fully automatic and will operate with either the AP300 (all-pneumatic) or EP250 (electropneumatic) control panel. Both panels are available with flow inducement (suction fill) ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
The model S3V is a nonmetallic submersible pump designed to operate reliably in difficult sump environments. It is fully automatic and can be run with either the AP300 (allpneumatic) or EP250 (electro-pneumatic) control panel. Solids capacity is 2” in diameter, which allows them to pump significant levels of debris/solids in highly corrosive conditions. The S3V can pump a very wide range ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
The models C2C (steel) and C2S (316SS) are condensate return pumps designed for direct connection to a flash tank/receiver and may also be used for submersed high temperature sump applications. There are no floats, over-center devices, valve mechanisms, switches or probes inside the pump. Instead the C2C/C2S is operated remotely and automatically by the innovative, all-pneumatic AP200C control ...
Manufactured by:Pitbull Industrial Pumps based inSouth Elgin, ILLINOIS (USA)
The model T2C (steel) and T2S (316SS) are transfer pumps designed for dry-piped applications, and can be either gravity fed or configured for suction lift applications. The T2's are suited for heavy/constant use in difficult fluid applications. Able to pass 2' solids along with abrasives, stringy materials, slurries and corrosives, the PITBULL's simple, seal-less design is the solution to many ...