- Home
- Equipment
Refine by
Applications
- Automated Cooking Oil Management Solutions for QSR & Fast Casual
- Automated Cooking Oil Management Solutions for Casual & Fine Dining Restaurants
- Automated Cooking Oil Management Solutions for Convenience Stores
- Automated Cooking Oil Management Solutions for Grocery Stores
- Automated Cooking Oil Management Solutions for Colleges & Universities
- Automated Cooking Oil Management Solutions for Hotel, Resorts & Casinos
- Ion Exchange Resin for Sugar Refinery Challenge
Rti Xprt Equipment & Supplies
50 equipment items found
Manufactured by:Recirculation Technologies, LLC (RTI) based inFort Washington, PENNSYLVANIA (USA)
Ion exchange resin ...
Manufactured by:Radiant Technologies, Inc based inAlbuquerque, NEW MEXICO (USA)
Thin-piezoelectric-film technology is leaving the laboratory to become commercial PiezoMEMS Analyzer. Much thicker bulk capacitors are being embedded as actuators and sensors inside their own electronic circuitry. Multidisciplinary teams of mechanical, electrical, and reliability engineers now work alongside materials engineers to create new and novel ...
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
Conventional allografts are used for various procedures to fill bony voids or gaps in a patient's skeletal system, restore segmental bone loss due to trauma, osteoporosis, removal of tumors or to aid in the surgical correction for a deformity. These grafts provide a scaffold for bone ingrowth to allow for remodeling with the patient’s own bone. These grafts are pre-cut to select sizes to ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Scatter Probe is our revolutionary solid-state detector for leakage and scatter detection in X-ray environments. Its unique design – two separate detector areas of 10 cm² and 100 cm² – fulfills current regulations and standards for X-ray leakage and scatter measurements (complies with the relevant 21 CFR and IEC 60601 standards). The Scatter Probe connects to our ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI MAS-1 is an invasive probe for the measurement of mA and mAs. Together with Piranha or the Cobia SENSE, direct reading of mA and mAs, as well as waveform, are obtained. The probe connects to the mAs socket in the X-ray generator and to the multimeter. It can be used to measure tube current for both radiographic and fluoroscopic exposures. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The DAP Chamber is the perfect tool for field calibration of orthodontic X-ray equipment. You can measure with just one click – fast, easy, and accurate, ensuring your X-ray quality control process runs safely and ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI CT Dose Profiler probe for use with our Piranha, Mako, Cobia FLEX, or Cobia SENSE (with PC com). Used for the evaluation of CT and CBCT systems. The probe fits into standard phantoms used for CTDI ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Dose Probe is an external dose probe designed to perform very low dose rate measurements, for instance, on image ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI T20 Dose Probe is a solid-state detector dedicated to measurements on Rad/Fluoro systems when it is crucial that the detector itself does not have any effect on the system output or disturb the X-ray beam. It was developed for measurements of the patient entrance dose (skin dose) and the maximum dose rate in the radiographic and fluoroscopic field. Despite its small size, the RTI T20 Dose ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI CT Ion (Ionization) Chamber is for use with the Piranha, Mako, Cobia FLEX R/F, and Cobia SENSE meters. The RTI CT Ion Chambers – 10 cm and 30 cm – are intended for CTDI and dose length product measurements on CT scanners in a phantom or ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
For accurate positioning. For accurate positioning of the RTI Dose Probe– in any position from vertical to upside-down use the Dose Probe Suction Cup Holder! ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Dose Probe Scatter Holder is a stand to fixate RTI Dose Probe in defined positions for scatter measurements on DEXA ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI offers an HVL Filter Holder for 33 x 33 mm or 100 x 100 mm filter ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
An adjustable stand for easier positioning of the HVL filter for RTI Dose Probe, Piranha, Barracuda MPD, and R100. Filter holder for 33 x 33 or 100 x 100 mm filter size. Please note: HVL Filter Kits are sold separately. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI CTDI Phantom Sets simulates adult and pediatric head and body of patients for QA testing of computed tomography (CT) systems. RTI offers two different CTDI Phantom sets. Choose two (2) or three (3) parts. Both have nested modules to allow adaptation to the size required by the selected user protocol. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The General mA Test Point Cable is made for special mA accuracy tests for AMX-4, Optima, Jedi, and Fluoroscan machines. No need to use an oscilloscope for setting up, configuring, triggering properly, calculating proper values, etc. Connect the leads to test points and use them with a Piranha meter and our world-leading Ocean Next™ software for X-ray QA and ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The Visi-X is optimized for light field/X-ray field alignment measurements. Simply darken the X-ray room and place your Visi-X under the X-ray tube. Adjust the light field, and make your exposure. The radiation field will immediately be visualized by the glow of the special phosphor compound. It can also be used for checking the centering of the bucky tray. Included: transport case (dimensions: ...
Manufactured by:Radiant Technologies, Inc based inAlbuquerque, NEW MEXICO (USA)
The Precision Premier II is an advanced tester that has a large test envelope in terms of frequency response, voltage range and accuracy. The Premier II has a fast hysteresis frequency rating of 250KHz at +/-10V built-in to the system. The Premier II execute tests to 100 kHz below 10 Volts, making it useful for both bulk and thin film capacitors. The Premier II is capable of measuring thin ...
Manufactured by:Radiant Technologies, Inc based inAlbuquerque, NEW MEXICO (USA)
The Precision LCII is Radiant's answer to a growing need for affordable characterization equipment. It is an ideal general-purpose tester with a broad test range for thin films and bulk ceramics, with a frequency rating of 5KHz at +/-200V built-in to the system. Using up to 32,000 points with 18-bit resolution from 2kHz out to 1/30th of a Hertz for capacitors ranging from square microns to square ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI MAS-2 probe is a clamp-on probe for the non-invasive measurement of mA (tube current) and mAs. Safe and easy to use. The probe is simply clamped onto the high voltage cable and then ready for measurements. No connection inside the X-ray generator is needed! Together with your meter, direct readings of mA and mAs, as well as waveform, are obtained. ...