- Home
- Equipment
Refine by
Raschig Xprt Equipment & Supplies
34 equipment items found
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Innovative design for increased biomass concentration, helping reduce tank volume required for wastewater treatment. Cost effective solution for retrofitting existing treatment systems. Inexpensive alternative media for new plants and as replacement media for existing ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Materials: Plastic Jaeger Bio-Rings are manufactured in weighted or un-weighted polypropylene to give a specific gravity greater than 1.0 or less than 1.0, depending on the ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Made in the USA, this spherical random packing is the ideal shape for packed beds. All sizes of this product in polypropylene are NSF 61 listed for potable water contact. As such, only virgin resin direct from a primary supplier is used, ensuring the rigid requirements of NSF are met. ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
The original random packing invented by Dr. Raschig. There are more optimized packings available today, but it’s a ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
The preferred media for replacing rock media in existing trickling filters. They are used extensively in anaerobic and aerobic submerged attached growth reactors while offering low installation costs. It is also offered in larger ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
A high performance carrier element for MBBR and IFAS processes. Its innovative design for increased biomass concentration helps reduce the tank volume required for wastewater treatment. It offers a cost-effective solution for retrofitting existing treatment systems or for new ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
A modular PVC support for random dump bio media. It is protective, skid resistant, and suitable for new systems as well as for retrofitting existing bio-trickling ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
The RJ-MV valve is a high capacity fixed valve technology. It will provide higher capacity and lower pressure drop per theoretical stage compared to sieve or conventional valve trays. The magnitude of improvement will vary depending on the physical system but will generally be greater as the system pressure is lower or when the operation is in the spray regime. Capacity improvements over ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Bubble cap trays were the work horse tower internal in the first part of the twentieth century until the late 1950's when it was superseded by sieve and valve trays. It consists of a flat perforated deck in which the holes are enclosed with vapour or gas chimney risers and caps in the form of inverted cups mounted on top of the risers. The caps can either be equipped with slots or holes, through ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
The RJ-VO valve is a fixed unit punched out of the tray deck at a fixed vertical curtain distance. The valve consists of 6 legs formed integrally with the tray deck. The fixed nature of the valve unit implies an operating range flexibility similar to that for sieve trays. The main advantage of fixed valves is that the high horizontal vapour velocity issuing through the narrow curtain area ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
The RJ-V4 valve is a low pressure drop general purpose unit in that the tray deck consists of a venturi-shaped orifice rather than a sharp-edge orifice. The venturi opening reduces significantly the pressure drop of the vapour at the deck entry and vertical curtain area. This leads to greater flexibility at lower vapour rates compared to that with a sharp-edge orifice. The RJ-V1 is used as the ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Conventional trays are cross flow trays. Liquid descending from the tray above emerges from the inlet down comer and flows across a rapidly diverging/converging open channel or tray active area to the outlet down comer. Vapour from the tray below is forced through the active area into the cross flowing liquid to produce a two-phase mixture of aerated liquid. The nature of the aerated liquid is ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
The RJ-V1 valve is a general purpose moveable float valve unit used in various services. The valve lid is normally 1.5 mm thick from which three restrictive legs are formed integrally. Various valve lifts are possible according to the leg rise. To improve the valve activity in certain cases trays are equipped with light and heavy ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
These two tray types are located inside a column in such a manor that the liquid and vapour are brought in to direct contact by forcing vapour through falling liquid. Liquid descends from one tray to the next either as a curtain of liquid raining down or as liquid rivulets passing through holes in the tray deck. Tray panels are flat or slightly inclined decks that occupy 40-60 % of the column ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
We have the experience to recommend the correct tray type and the number of trays needed to achieve the separation ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Modular media consisting of extruded HDPE. tubes which are heat welded into rugged blocks. Vertical tube orientation resists plugging of biomass. Improved treatment efficiency due to. 3-dimensional openness of media which. promotes complete mixing within the ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Pall Rings (Jaeger Rings, Ballast Rings, Basic Rings, etc.). Traditional plastic random packing for scrubber, stripper, and biological applications. Traditional plastic random packing for scrubber stripper and biological applications. Polypropylene - Other plastic resins available such as PVC, CPVC, PVDF, PFA and others. Please inquire regarding the specific needs of your ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Trays can be fabricated from numerous materials. Most often observed in the field are carbon, ferritic and austenitic steels. Exotic metals such as Hasteloy alloys, titanium and other steel types are also available and may be needed dependent upon specific project ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Raschig USA prepared the mechanical and process designs of the trays for this tower and then supeivised the fabrication and assembly of the several trays required for the tower. The design included all aspects of the tray seen here -including the support arms in addition to the panel itself. Also please note manways included in the tray design on either side of the pressure relief ...
Manufactured by:Raschig GmbH / Raschig USA, Inc. based inArlington, TEXAS (USA)
Bio-Pac is Jaeger Enviromental's random packed polypropylene media ideally suited for trickling filter applications and submerged bed applications, including submerged aerated filters and submerged anaerobic systems. Wide range of material specific gravity available for varying media buoyancy. Bio-Pac is available with 30, 31 and 60 ft2/ft3 (100 and 200 m2/m3) of surface ...