- Home
- Equipment
Refine by
Sam Xprt Equipment & Supplies
38 equipment items found
Manufactured by:Coombridge & Alexander Ltd. based inHamilton, NEW ZEALAND
400mm Wide Floor-Belt. Hydraulic Clutch to Ground Driven Floor-Belt. UV-stabilised Polyethylene Bin - 8mm. Arc Spray Galvanised Chassis (Thermion Zinc Metal-spraying). Stainless Steel - Deflectors, Skirts and Internal Panels. Hydraulically-driven Twin 600mm Spinner Discs. Independent quality and accuracy testing by AgCal NZ ...
Manufactured by:Coombridge & Alexander Ltd. based inHamilton, NEW ZEALAND
Shot Blasted, Primed and Two-Pot Paint Finish Coated. Double-thickness Elevator Bars. Pressed Stainless-Steel Bin Sides. High-Strength Birch-Ply Timber Floor. Hydraulic Sensor Valve (controlling the floor and elevator speeds). 10-13mm Floor-Chain (model dependent). Improved Floor-Chain and Conveyor set-up for Palm Kernel and similar products. Extensive use of Stainless-Steel and ‘Hot ...
Manufactured by:SAM Integrations Private Limited based inPune, INDIA
Helps In Filtration of Debris/ impurities Up to 120 µ ,Which gets Collected In The Over -head tank. Eliminates Non- Supended Impurities from Water, supplying clean water For Domestic Application. Easy maintenance and Easy to install and clean. Non Corrosive Stainless steel Filter Mesh and plastic Body. Filter body use Engineering plastic ...
Manufactured by:SAM Integrations Private Limited based inPune, INDIA
Designed Pressure: Upto 10 Kg/Sq.cm. Operting Pressure Range: 1.7 to 8Kg/sq.cm. Minimum Sealing Pressure: 0.7 Kg/Sq.cm. Temperature Range: Water upto 60° ...
Manufactured by:SAM Integrations Private Limited based inPune, INDIA
Designed Pressure: Upto 10 Kg/Sq.cm. Operting Pressure Range: 1.7 to 8Kg/sq.cm. Minimum Sealing Pressure: 0.7 Kg/Sq.cm. Temperature Range: Water upto 60° ...
Manufactured by:SAM Integrations Private Limited based inPune, INDIA
Designed Pressure: Upto 10 Kg/Sq.cm. Operting Pressure Range: 1.5 to 8Kg/sq.cm. Temperature Range: Water upto 60° ...
Manufactured by:SAM Integrations Private Limited based inPune, INDIA
Designed Pressure: Upto 10 Kg/Sq.cm. Operting Pressure Range: 0.7 to 8Kg/sq.cm. Minimum Sealing Pressure: 0.7 Kg/Sq.cm. Supply Voltage: - 2o-28 V AC, 50/60 Hz. Temperature Range: Water upto 60° ...
Manufactured by:SaM-Power GmbH based inSittensen, GERMANY
With OptiMaxX, SaM-Power presents the result of years of research and development. The result is SaM-Power's most potent standardized trace element solution. With OptiMaxX, you benefit from extremely high microbiological availability, which leads to proven stabilization and optimization of all biogas processes. This allows you to effectively increase the performance of your biogas plant. Another ...
Manufactured by:Hale Products Inc based inOcala, FLORIDA (USA)
SAM is an integrated total water flow control system that manages your truck’s, pump, tank, intakes and discharges. A touch-screen display, provides a simplified interface that totally transforms traditional pump operations. The SAM control system provides complete control of the flow to and from the pump from two interfaces, the SAM control center and the pump controller. INTRODUCING: The ...
Manufactured by:SaM-Power GmbH based inSittensen, GERMANY
SaM-Tec offers a comprehensive range of technical products designed for biogas systems, enhancing their reliability and efficiency. Their portfolio includes service parts for leading CHP unit and engine manufacturers, as well as plant and pump technology, and advanced agitator technology. This extensive inventory ensures quick delivery, often expedited via express shipping, guaranteeing high ...
by:SAMS Enterprise Ltd. based inOban, Argyll, UNITED KINGDOM
SAMS Enterprise manufacture novel autonomous devices that provide reliable measurement of snow and ice structure. These devices from SAMS Enterprise allow monitoring of ice or snow thickness, movement and temperature profiles, whilst resolving any air, ice or water ...
Manufactured by:Coombridge & Alexander Ltd. based inHamilton, NEW ZEALAND
With the same practical design and easy to use operation that all SAM’s are known for, the SAM Combo Spreaders (800 Series) provide extra versatility around what you are able to spread. They are capable of spreading chemical fertiliser including; superphosphate, urea and lime. But will also spread most organic product like chicken and pig manure, screw-pressed effluent and sand. Available ...
Manufactured by:Stanford Advanced Materials Corporation (SAM) based inLake Forest, CALIFORNIA (USA)
Aluminum, or Aluminium, is a silvery-white, soft, non-magnetic and ductile metal in the boron group. By mass, aluminum makes up about 8% of the Earth’s crust; it is the third most abundant element after oxygen and silicon and the most abundant metal in the crust, though it is less common in the mantle below. The chief ore of aluminum is bauxite. Aluminum metal is highly reactive, such that ...
Manufactured by:Stanford Advanced Materials Corporation (SAM) based inLake Forest, CALIFORNIA (USA)
Barium is the fifth element in group 2 and is a soft, silvery alkaline earth metal. Because of its high chemical reactivity, barium is never found in nature as a free element. Its hydroxide, known in pre-modern times as baryta, does not occur as a mineral, but can be prepared by heating barium carbonate. The most common naturally occurring minerals of barium are barite (barium sulfate, BaSO4) and ...
Manufactured by:Stanford Advanced Materials Corporation (SAM) based inLake Forest, CALIFORNIA (USA)
A treasured metallic is extraordinary, evidently taking place metallic chemical detail of excessive economic cost. Chemically, the treasured metals have a tendency to be much less reactive than most elements (see noble metal). they may be commonly ductile and have a high luster. historically, precious metals had been vital as forex however at the moment are seemed mainly as investment and ...
Manufactured by:Stanford Advanced Materials Corporation (SAM) based inLake Forest, CALIFORNIA (USA)
Stanford Advanced Materials provides a wide range of planar targets for large area deposition and other market ...
Manufactured by:Coombridge & Alexander Ltd. based inHamilton, NEW ZEALAND
Known for practical design and easy to use operation, SAM Fertiliser Spreaders are developed from over 70 years’ experience. The features in today’s machines are the benchmark for fertiliser spreading throughout New Zealand. Choose a SAM Spreader for extreme reliability and mega-solid construction. They provide an accurate spread pattern, with ease of operation and fast spare-parts ...
Manufactured by:Coombridge & Alexander Ltd. based inHamilton, NEW ZEALAND
With the same practical design and easy to use operation that all SAM’s are known for, the SAM Combo Spreaders (800 Series) provide extra versatility around what you are able to spread. They are capable of spreading chemical fertiliser including; superphosphate, urea and lime. But will also spread most organic product like chicken and pig manure, screw-pressed effluent and sand. Available ...
Manufactured by:RDS Technology Ltd. based inSTROUD, UNITED KINGDOM
The RDS SAM 100 is an easy-to-use and cost-effective method of collecting fieldwork data for cost-analysis relevant to both farmers and ...
Manufactured by:Stanford Advanced Materials Corporation (SAM) based inLake Forest, CALIFORNIA (USA)
Machined from oxygen-free, high-conductivity copper. For regular, circular disc-type sputtering sources. Most sputter sources accept a 0.125″ (1/8″) thick target bonded to a 0.125″ thick backing plate. For targets of other thicknesses, choose the backing plate thickness to adjust the total thickness to 0.250″ (1/4″) to suit most ...