- Home
- Equipment
Refine by
Slacan Xprt Equipment & Supplies
10 equipment items found
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
Use of an Angle Thimble Eye permits assembly of the upper end of the guy on the ground before raising it to the pole top. The bolt hole is heavily reinforced and the thimble eye is forged at a 45 degree ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
SLACAN has provided a complete line of power distribution hardware, from the substation to the service drop. The catalogue pages show the most common products used in the distribution of Utility Power to all residents. Although not specified, many products can be made to meet low temperature ductility (Charpy V notch) requirements. Contact us if you need something not found in the ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
Drive Hooks are made to exacting specifications to ensure maximum strength for all load conditions. The sharp, threadless point penetrates easily into pole or wood. A flat driving head is provided on the hook end. Thread is fetter drive. For steel poles, the catalogue number 1317 has a curved base to accomodate two 1/4'' (6.4 mm) diameter tapping ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
Anchor bolts are used to fix plates, columns, sign structures and many other objects to concrete. They are available as hook bolts or straight with bottom nut welded to anchor. Bolts are made from 300w ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
Inspection and test of the ground rod connections at substation and similar grounding installations is made easy by the Ground Electrode Box as it provides ready access to the connection ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
The angle arm or ''V'' brace is used in locations where heavy loads are encountered due to line angles or equipment mounted on the crossarms. They are made in two strength ratings and various combinations of width and ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
Signs can be mounted to posts without drilling through bolts using these assemblies. The galvanized steel front strap has a large flat area complete with sign mounting bolt. The rear strap can be tightened to clamp to the sign post at the most convenient ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
Both types have two holes in the U-strap which fit over the end of the ground rod. High pressure contact is maintained by a square head set screw. Both types accommodate up to 2/0 copper ground wire. Supplied assembled with 1/2'' (12.7mm) set screw, hex. nut, square ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
SLACAN has been involved in the development, testing, design and supply of the complete range of Suspension, Deadend, Guying, Anchoring and Vibration Suppression systems both as a manufacturer and as consultants to the utility market. ...
Manufactured by:SLACAN Industries Inc. based inBrantford, ONTARIO (CANADA)
This malleable iron clamp is used to ground from steel strand 1/4'' (6.4mm) to 3/8'' (9.5 mm) to a copper ground wire #9 to #4 ...