- Home
- Equipment
Refine by
Sset Xprt Equipment & Supplies
20 equipment items found
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
CE-D series is a 3 phase AC intelligent transducer with the programmable power, intelligent measurement, digital tube display, power accumulation, transmission output, switch output, RS485 output, measurement of four quadrant power and other function. It is with the advantage of high precision, strong electromagnetic compatibility. ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
CE-D series with MU4 case intelligent transducer functions programmable, true RMS measurement, digital tube display, power accumulation, the standard analog, switch, RS485 output. It makes the features of high precision, good electromagnetic compatibility, good looks and so on. Can set any one electrical parameter of voltage, current, power and power factor corresponding standard analog output ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This product is a 3-phase power integrated measurement of 3-phase 3 wire digital isolation transducer. The two- table method is used to measure the full-parameter of three - phase three - wire AC loop. Using high-precision 24-bit dedicated AD chip, the ratio dynamic range can be up to 1000: 1, the measurement parameters are voltage, current, frequency, active power, reactive power, power factor, ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This device is an electrical isolation transducer of DC power measurement. By converting the measured input voltage and current into DC power to transmit output, Through the internal switch can switch a variety of output types, while with polarity switching function can be unipolar or bipolar measurement, The product can be widely used in DC power supply cabinet and DC power supply system ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This series of products use professional MCU and 24-bit high-precision AD for data acquisition, non-linear processing algorithms and isolated measurement of the various models of thermal resistance and thermocouple signals, The transmission output is standard DC signal of 0 ~ 20mA , 0 ~ 5V, 4 ~ 20mA or 1 ~ 5V, with high precision, high isolation, low power consumption, low drift, wide temperature ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
Background: With the rapid development of electronic technology, with the emphasis on external radiated interference (EMI) of electronic products, railways, electric power and other industries have clearly proposed technical standards and required mandatory ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This product is a combined current transformer that can simultaneously detect lightning current and AC high current. The two-way current inputs and outputs are completely isolated, with high isolation voltage. The product is safe and reliable, and the signal is electromagnetically isolated, which makes the output signal and the input signal have a linear relationship. The product has the ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
CE-D series 1-element digital display header (Figure 1) has the function of real-time LED digital display and setting the display ratio for the measured electrical ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This product is a single-channel AC current acquisition and measurement digital isolation transducer. It can measure the current of the AC circuit. Using high-precision 24-bit dedicated AD chip, the ratio dynamic range can be up to 1000: 1. True RMS measurement of current is with high accuracy, good stability and high communication speed, the completely isolated processing technology is with ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
Three-phase AC digital display using high-speed digital signal processing chip and high-precision energy metering chip, can accurately and constantly measure the common power parameters in the power grid, three-phase voltage, three-phase current, active power of each phase, reactive power, inspecting power, power factor, active energy, reactive energy and grid frequency, it is with RS485 ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This product is a power integrated measurement of single-phase digital isolation transducer. It can measure the full-parameter of the AC circuit. Using high-precision 24-bit dedicated AD chip, the ratio dynamic range can be up to 1000: 1, the measurement parameters are voltage, current, frequency, active power, reactive power, power factor, total accumulative energy and other electrical ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This product is a 3-phase 3 wire digital isolation transducer of 3-phase power integrated measurement. The two- table method is used to measure the full-parameter of three-phase three-wire AC loop. Using high-precision 24-bit dedicated AD chip, the ratio dynamic range can be up to 1000: 1, the measurement parameters are voltage, current, frequency, active power, reactive power, power factor, ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This product is an electrical isolation transducer of single-phase active and reactive power measurement, complete isolation between input and output signals. Through the internal switch can be switched to active and reactive power measurement, with polarity switch-over measurement function simultaneously, can offer unipolarity or bipolarity measurements, no need to distinguish direction of ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This device is an electrical isolation transducer of 3-phase active, reactive power, power factor, and true RMS measurement. Its input is isolated from output signal, and output linear standard analog signal. Through the internal switch, can switch to active, reactive power and power factor measurement of 3-phase 3-wire and 3-phase 4-wire. The product can be widely used in electric power, ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This series of products are high AC current measurement isolation transducer, the maximum measurable range is up to 3000A, completely isolated between the input and output, easy for installation, good security. The device can easily achieve the high current measurement, Compared to the transformer (CT) detection, there are obvious advantages on signal isolation and stability, and the standard ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This device is an AC high current electrical isolation transducer, Its input and output are not common grounded. The input signal is AC current, and the output signal is standard signal of DC voltage or DC current. The product with the characteristics of high precision, high isolation voltage, low temperature drift, small size and easy installation. It can be widely used in communication, ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
The product is a zero sequence AC current isolation transducer, mainly used to measure the three-phase current phasor or current change of neutral line N (zero line) in three-phase four-wire circuit. Compared with the zero sequence current transformer (CT) detection, there are obvious advantages on signal isolation and stability, standard output signal can be directly connected to the host of the ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
The high precision perforation type AC micro current isolation transducer developed by our company applies to microampere or milliampere AC current detection in various electrical systems, such as lightning arrester status detection ( good, lose efficacy, damage), a variety of electrical equipment, devices, instruments insulation and leakage current detection. ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
This device is a 3-phase 4-wire AC voltage isolation transducer. It is designed for application where AC voltage waveform is not purely sinusoidal. It’s more precise and accurate than other transducers. The product is widely used in non-standard waveform distortion sine wave real-time signal detection and ...
Manufactured by:Shenzhen Sensor Electronic Technology Co., Ltd. based inShenzhen, CHINA
CE-NT01 NB-IOT transmission terminal is an external terminal that uses NB-IOT network for wireless data transmission. It is small in size and supports online, hibernation and PSM mode automatic switching. It realizes ultra-low power consumption and supports COAP/UDP network. protocol. Users do not need to set up a server to fully support industrial configuration applications. Users do not need to ...