- Home
- Equipment
Refine by
Seasonde Xprt Equipment & Supplies
11 equipment items found
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
Operators must adhere to local radiated signal regulations and receive proper authorizations prior to operation. Licenses should be obtained by system operator/owner prior to transmission. System can be manufactured to be tuned for operation at user-specified frequency, which can be one of the authorized oceanographic radar bands as defined by ITU, or any other band authorized by presiding local ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
An Uninterruptible Power Supply (UPS) connecting the SeaSonde unit to power source (e.g. wall plug) will provide layer of protection to electronics from power surges that come from power line and also provide for continued quality performance through power fluctuations (sometimes referred to as “brownouts”). UPS is rated at least 1500VA (1050 watts). The UPS is intended to only ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
The SeaSonde Connector & Adapter Kit contains a variety of connector and adapters that are used inside cable replacement and repair ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
The SeaSonde HF radar system by CODAR Ocean Sensors is your solution for making continuous, wide-area ocean observations. The SeaSonde will provide you with years of real-time data over large coverage areas, with ranges up to 200 km -- This is not possible with any other technology! The SeaSonde is a compact, non-contact surface current and wave measurement system that can be deployed and ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
The SeaSonde Central Site is the hub for monitoring and combining data from all the Remote Units in your entire SeaSonde network. Manage data transfers from remote sites so that you can produce and display the most up-to-date current maps. Display diagnostic data in one convenient place for quick operator access. SSDP-100 hardware can be installed locally or in a data center thousands of ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
Small, portable transponder used for SeaSonde antenna pattern measurements. The SeaSonde Transponder is built into a water-resistant (not waterproof) case containing transponder electronics and can be used on boat or land. The SSTR-101 comes with parts suitable for operation at frequencies between 24-50 ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
CODAR designed the SeaSonde Antenna Base Hinge Assembly to ease maintenance and repair work for field technicians. This assembly enables a single operator to more simply lower and upright a SeaSonde antenna. The SeaSonde Antenna Base Hinge Assembly is compatible with the dome-style antennas (receive-only and combined transmit-receive) and long-range transmit antennas. The assembly is both durable ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
An external hard disk is recommended for use at each SeaSonde Remote Unit and SeaSonde Central Management / Data Combining Station. These external hard drives can provide automatic data backup and are conveniently field swappable. External Hard Disk is intended for indoor use ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
The SeaSonde Extended Lightning Protection Kit, CODAR Product Code LT-E1, is an optional secondary lightning protection package set in a small weatherproof housing mountable either indoors or outdoors intended to provide one additional layer of electronics protection. It uses the same gas discharge tube method on all transmit and receive cables connected to the electronics. It is not a guarantee ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
Portable and durable field tool case equip with a variety of specialized tools critical for servicing a SeaSonde system. This tool kit can be used to service and/or maintain any SeaSonde antenna and/or electronics. Some items can also be used to troubleshoot the system, if ...
Manufactured by:Codar Ocean Sensors based inMountain View, CALIFORNIA (USA)
Securing your dome-style antenna using guy ropes is made simple with a new “Dome Antenna Guy Rope Holder”. The Dome Antenna Guy Rope Holder Flange is a specially fabricated ring with 4 eye hooks that feeds onto the antenna mast for attaching guy ropes. The flange is constructed of painted fiberglass. All exposed metal parts: washers, nuts and eyebolt screw are 316 SS. Eye bolts have ...