- Home
- Equipment
Refine by
Sepac Xprt Equipment & Supplies
15 equipment items found
Manufactured by:SEPAC Inc. based inElmira, NEW YORK (USA)
Stationary Field Tooth Clutches; 3 to 10.5” diameter; 2 to 7.5” length. Bore sizes from 0.5 to 4.25”. Static torque from 40 to 5200 lb-ft. 1400 to 3500 RPM. Operates both dry and in oil. Modified designs and customized assemblies ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Information Systems & Substation Local control SIMPAC-T: SIMPAC - UCAD, SIMPAC CIC XAR2/4, SIMPAC - CIC - XAR2/6, SIMPAC XAR2 - ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Compact Communication Controller Equipment that manages a wide range of communication protocols either standard or proprietary. Insures full connectivity to any Protection, Automation and Control equipment with Lan Ethernet and Superior Level ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Remote Systems ( SSR's ) SIMPAC XAR1-M. SIMPAC UCAD. SIMPAC CIC ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
SEPAC CORPORATION has extensive experience in handling traction rectifier contracts for main line, suburban, underground, rapid transit, tramway, trolleybus and mining railways. ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
SEPAC CORPORATION, through the Thorn Automation technology, is well equipped to handle for all electrochemical and electrometallurgical applications. Typical of these applications are the production of chlorine, caustic soda, hydrogen, oxygen and the refining or winning of metals such as copper, zinc and cobalt. Similar equipment provide d.c. power for many other processes such as plating, ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Microprocessed Unit (Programmable Logic Controller) DRIVE MASTER PLUS constitutes a digital control system that allows for voltage regulation at the synchronous generator's terminals keeping in within its normal operation parameters in a safe way using the compensators and limiters included in the automatic ...
Manufactured by:SEPAC Inc. based inElmira, NEW YORK (USA)
Wet Static Torque – 11 to 722 lb-ft. Wet Starting Torque – 6 to 408 lb-ft. Dry Static Torque – 12 to 802 lb-ft. Dry Starting Torque – 9 to 612 lb-ft. Max Speed – 1750 to 4200 rpm. Nine standard frame sizes. Overall Length – 2.6″ to 5.4″. Overall Dia. – 3.9″ to 9.2″. Rotor Bore – .8″ to ...
Manufactured by:SEPAC Inc. based inElmira, NEW YORK (USA)
Spring Engaged Tooth Brakes; 2.8 to 9.6” diameter; 1.4 to 6.5” length. Bore sizes from 1.2 to 5.1”. Static torque from 20 to 2600 lb-ft. 1800 to 5500 RPM max speed. Operates both dry and in oil. Modified designs and customized assemblies ...
Manufactured by:SEPAC Inc. based inElmira, NEW YORK (USA)
1.1 to 6.3” diameter ; 1.1 to 3.6” length; Bore sizes from 6 to 40 mm. Static torque from 0.3 to 103.3 lb-ft. 24 VDC coil voltage. Dry operation. Modified designs and customized assemblies ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Supervisory control system with monitoring, telecontrol, telemetering, electric network automation and system management functions. This device guarranties process telecontrol through any of the servers or operation terminals. This is achieved using a LAN Ethernet IEEE 802.3 , connected to a front end ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Information Systems & Substation Local control SIMPAC-D: SIMPAC - UCAD. SIMPAC CIC XAR2/4. SIMPAC - CIC - XAR2/6. SIMPAC XAR2 - ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
The RAV 1101/1111 static excitation system is designed to operate with Generators ranging from a few Mega Watts up to 600MW regardless of the rotor's characteristic (Brushless or direct excitation ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
In 1985 the mexican federal power generation board approached both local and overseas suppliers of high power voltage reulator equipment with a request to investigate the possibility of replacing existing field controls of power generation alternators. As a result of this exercise SEPAC Corporation obtained order for AVR equipment that has now become a starndard along with d.c. controlled ...
Manufactured by:SEPAC Corporation based inMiami, FLORIDA (USA)
Rectifier plant for general industrial use encompasses a variety of different applications demanding a broad understanding of power engineering. SEPAC CORPORATION with the backup years of Thorn Automation is prepare to design and manufacture of all types of power conversion equipment and has successfully used this knowledge to provide: Rectifier installations for factories, dockyards, shipboard ...