- Home
- Equipment
Refine by
Snowpure Xprt Equipment & Supplies
25 equipment items found
Showcase
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Zapwater EDI modules are specifically designed for small laboratory water systems, including countertop and wall-mounted units. When paired with reverse osmosis (RO), Zapwater RO-EDI systems can produce ASTM Type I & II or JIS A2–A4 laboratory water. With optimized RO and pretreatment, they consistently deliver 17 MΩ·cm water ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electrodialysis (ED) & Electrodialysis Reversal (EDR) are used around the globe in many industrial, laboratory and recycling environments. ED is an industrial membrane separation process in which ions are transported through ion-permeable membranes, from one stream to another, under the influence of a voltage potential gradient. The electrical charges on the ions allow them to be driven ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
The XL-HTS Electropure series offers flow capacities from 50 L/h to 2.3 m³/h (up to 10 gpm), depending on system requirements. Designed for periodic hot or cold sanitization, these modules are engineered to withstand heat cycling up to 85°C for more than 100 cycles. Typical hot water sanitization is performed at 72–80°C, meeting the latest FDA guidance for safe and reliable ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Nanofiltration (NF) is a membrane separation process. NF membranes pass water and reject ionic and non-ionic species based on both size and charge. Nanofiltration is not simply “loose RO”, and does more than “pass more ions than an RO” (as the phrase implies). Nanofiltration membranes are tuned to perform the specific separation the customer needs. Each NF manufacturer ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
The DemandPure™2 KISS EDI is the simplest way to replace Commercial & Industrial portable exchange DI and to provide a recurring revenue (BOO or BOOT) solution to dealers whenever an exchange tank solution is not economic or welcomed. DemandPure™2 KISS EDI Keep It Simple Systems™ are completely automatic and can easily be installed after an RO, and left in place with no need ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
3M Liqui-Cel Membrane Degassing Technology: Liqui-Cel Membrane Degassing Technology, efficiently removes (or adds) dissolved gases from (to) liquids. These membrane devices have displaced older technologies such as vacuum towers, forced draft deaerators, and oxygen scavengers in the last 25 years. Typical applications are O2 and CO2 removal from ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
ELECTROPURE EXL-550 EDI modules are designed to be the highest rejection EDI modules on the market. EXL is configured to easily build ultrapure water systems with the well -known benefits of Electropure v EDI technology. The EXL-550 achieves high quality even with 1-Pass RO, saving you ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure's ExcellPureRO™ membranes are uniquely designed for high rejection of silica. Achieving low silica is important for many applications, including providing feedwater for electrodeionization (EDI) systems. We have matched these SXR™ membrane elements to specific Electropure™ EDI ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
XL-SR Electropure EDI products can handle a range of flows from 50 l/h to 2.3 m3/hr (10 gpm), depending on the specific requirements of the customer. These are designed for periodic cold sanitization using peroxide/peracetic acid (for example Minncare Cold Sterilant). ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
ExcellNano nanofiltration NF membranes are uniquely designed for special process separations. Features: Unique 2- or 3-layer chemistry, true NF chemistry (“not loose RO” like NF-90). 3-layer NF has a smooth, hydrophilic thin film microscopic surface. 3-layer NF is lower fouling than 2-layer. Spiral-wound flat ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
ELECTROPURE EXL-750 EDI modules are designed to be the highest rejection EDI modules on the market. EXL is configured to easily build ultrapurc water systems with the well-known benefits of Electropure EDI technology. The EXL-750 can achieve high qualify even with 1-Puss RO, saving you ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure provides a unique UV water treatment system that is the new standard for Microbial Disinfection, TOC Reduction (Total Organic Carbon), and Chlorine Removal. This patented product line utilizes “Reflex®” a highly-reflective UV treatment chamber that maximizes the use of the ultraviolet light emitted, and saves 80-90% of the power required. Most UV lose 80-90% of their UV ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
ELECTROPURE EXL-850 EDI modules are designed to be the highest rejection EDI modules on the market. EXL is configured to easily build ultrapurc water systems with the well-known benefits of Electropure'" EDI technology. The EXL-850 can achieve belter quality even with 1-Pass RO, saving you ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure’s ExcellUltra ultrafiltration (UF) membranes are uniquely designed for pretreatment of RO membranes, and for final filtration of ultrapure ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electropuretm EDI technology has fundamental advantages and differences from other EDI products. There are similarities to other EDIs, but Electropure EDI has 4 major technical ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electrodialysis (ED or EDR) is used around the globe in many industrial, laboratory and recycling environments. EDR is an industrial membrane separation process in which ions are transported through ion- permeable membranes, from one stream to another, under the influence of a voltage potential gradient. If the ED is symmetrical, it can be run in EDR reversal mode to keep fouling to a ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure’s DC Power Product Line Commercial Power Supplies for Single Electropure™ brand EDI Modules to 2.3 M³/h (10 ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
The XL-R Electropure EDI modules are built for rugged industrial applications, with flow capacities ranging from 50 l/h to 2.3 m³/h (up to 10 gpm), depending on customer needs. Designed for durability, they can be integrated into systems constructed from PP, PVC, or stainless steel, ensuring reliable performance across diverse industrial ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure has developed a kit of tools to help our OEM customers design & market Electropure™ EDI for their pure water customers. It can be sent electronically via e-mail, or mailed via USB memory sticks (with a printed version of SnowPure’s Best Practices P&IDs). To save paper and help the environment, we try not to print brochures as much as possible. However, hardcopy-color ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure’s DC Power Product Line: Industrial Power Supplies for Single and Multiple EDI Modules to 60 m³/h (264 ...