- Home
- Equipment
Refine by
Sterlitech Xprt Equipment & Supplies
102 equipment items found
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech Silver Metal Filter Membranes are pure metallic silver (99.97% pure silver) and are available with particle retention ratings of 0.2 to 5.0 microns. Silver metal membrane cells are used in a variety of filtration applications, and their ability to withstand extreme chemical and thermal stress makes them ideal for applications involving aggressive fluids and/or high ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Hydrophilic, pure cellulose acetate (CA) membrane filters are one of the lowest protein binding filters available; ideally suited for general filtration and biological/clinical analyses requiring maximum protein recovery. Our cellulose acetate membrane filters provide superior throughput and reduce the need for filter changes; effectively decreasing both cost and process times. The hydrophilic ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech Nitrocellulose Mixed Esters (MCE) membrane is an unsupported, naturally hydrophilic membrane. It is ideal for use in diagnostic kit manufacturing applications. Sterlitech MCE, a proprietory mixture of nitrocellulose and cellulose acetate, meets rigorous quality standards throughout every step of production. This process ensures the membrane has a uniform pore structure and consistent ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech Polyethersulfone (PES) membrane is a hydrophilic membrane constructed from pure polyethersulfone polymer membrane. PES membrane filters are designed to remove particulates during general filtration. Their low protein and drug binding characteristics also make polyethersulfone (PES) membrane disc filters ideally suited for use in life science ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Type GC-50 meets the requirements for suspended solids testing, as described in Standard Methods for the Examination of Water and Wastewater, current edition. Reduce filtration costs and premature clogging when filtering difficult-to-filter or highly contaminated solutions. Extend filter life and make fewer final filter changes with high capacity prefilters. Eliminate sample contamination. ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Polyester PETE membrane is made from a thin, microporous, hydrophilic polyester material film with a high degree of solvent resistance. It is ideal for use in blood assays or general filtration where chemically aggressive solvents may be used. Sterlitech Polyester membrane is produced through a two-step proprietary manufacturing process that employs high quality standards throughout production. ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech polypropylene membrane filters are composed of pure polypropylene with absolute pore size ratings. These filters offer broad chemical compatibility allowing its use with aqueous and organic solvent samples. The polypropylene filter has extremely low extractable levels designed to provide accurate, consistent analysis results for sensitive ion chromatography applications while ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech PTFE polytetrafluoroethylene membrane consists of a pure PTFE laminated to a polypropylene support for improved durability and easy handling. These filters are chemically compatible with strong acids and most aggressive solvents such as alcohols. Laminated PTFE filters can also be used to filter aqueous solutions when prewetted with methanol. They are autoclavable up to 130°C (260°F) ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech PTFE polytetrafluoroethylene membrane consists of a pure PTFE tortuous pore structure. PTFE membranes are unsupported. The larger pore sizes are thicker for easy handling. These filters are chemically and biologically inert, stable up to 260°C (500°F) and will withstand most concentrated acids and bases. The unlaminated filters are compatible with strong acids, aggressive solvents and ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Can be used aseptically. Recessed filter support provides sufficient clearance so that the membrane will not twist or tear when the funnel is secured. Graduated funnel in 300 ml (standard) or 500 ml (wide mouth) capacities. Receiver flask (KP47S) is interchangeable with all other models. Funnel cover can be vented aseptically using disposable syringe ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
This holder is made from nonbreakable stainless steel and may be flame sterilized between samplings. Stainless Steel Filter Holder Product Benefits: Pins and funnel locking nut can be set to prevent membrane twisting and tearing Autoclavable with membrane in place Stainless steel support 500ml ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
All-glass design restricts contact with reactive surfaces such as steel or rubber to minimize contamination of sample or filtrate. Standard 25 or 47mm filtration funnels mount on filtration flask using a ground glass joint. Outlet of support base drip tube is positioned below the side arm connection to prevent sample aspiration into vacuum line. All wetted surfaces are borosilicate glass with ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Borosilicate filter flasks and silicone rubber stoppers are compatible with Sterlitech filter holders. About Sterlitech Glass Filter Flasks: Use glass filter flasks to collect filtrate or to act as a trap to prevent liquid from damaging pump or vacuum line Glass filter flasks with ground glass joint fit holders with female joint (GFA, P/FC 2) About Sterlitech Silicone Rubber ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
These hydrophilic, polycarbonate track-etch (PCTE) membrane filters have been pigmented using black dye to minimize membrane autofluorescence. The dyed PCTE membrane filters are ideal for use with fluorescence microscopy analyses that involve direct observation and enumeration of animal cells or microorganisms that have been labeled with fluorescent markers. They are also suitable for optical ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Sterlitech vacuum filter holders and filter funnels are designed for the optimum vacuum filtration of small volumes for biological or particulate contamination. Our vacuum filtration equipment comes in a broad range of materials and diameters to accomodate most standard membrane filter sizes and ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
The Autofil™ laboratory filtration system is a disposable, sterile, vacuum operated system used for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. Autofil™ is available either as a complete system or as a bottle-top ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
The EZgrip™ Carboy offered by Sterlitech is the most advanced fluid storage and transfer system available today. Its innovative design is the culmination of an extensive two-year study of end-users to create the ideal carboy for use in life sciences, bioprocesses, and pharmaceutical manufacturing. Easy to handle, space-efficient, and durable, the EZgrip™ Carboy is manufactured in a four ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
The SEPA CFX Cell is a laboratory-scale crossflow filtration unit that is designed to evaluate the performance of flat sheet membranes in a variety of applications. It simulates the flow dynamics of larger, commercially available membrane elements such as industrial spiral wound membrane elements. By using a combination of Stainless Steel (SS) shims, feed spacers, and membranes, users can vary ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
50mm Disc Capsule, Glass Fiber 5 um Prefilter over 0.20um PES Final Filter, 1/8" Barb ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Grade CFP1 Cellulose Filter Paper, 32mm, 100/Pk (11 micron). SKU: CFP1-032. Manufacturer: Sterlitech. Filter Material: CFP1. Diameter (mm): 32. Pack Size: 100. Est Ship: 5-7 ...