- Home
- Equipment
Refine by
Strathkelvin Xprt Equipment & Supplies
21 equipment items found
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
Blue rack to hold spare glass cells for extra testing. (Glass sold separate). Glass sold ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
Activated Sludge is added in both sides of the split-flask, then on one side ATU is added to kill off the nitrifying bacteria, so a determination can be made of the impact of the nitrifying bacteria on the overall health of the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
Air stones are used in the aeration of the Activated Sludge in our Strathtox Instrument. Airstones are sold as spares for the Strathtox in sets of ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI021 - FEP Membranes, 15 in the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SI020 1302 Service Kit (with PP Jackets). These kits are used to service our Strathtox Instrument and our Biomed ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For PO2 measurement of blood or other fluids, or for microflowcell use. The all-glass sample chamber has a capacity of approximately 70µl. Samples are injected into the chamber via a 1 mm stainless steel tube fitted with a fine p.v.c needle-locating collar. The sample leaves the chamber through a glass Luer fitting to which a small bore flexible drainage tube can be connected. The sample ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The model 782 is a new concept in precision dissolved oxygen measurement. It acts as either a stand-alone oxygen meter or it can be connected to the Strathkelvin respirometry/monitoring software (supplied) on your PC. Either one or two 1302 electrodes can be connected to the meter. The digital display can be set to read in units of PO2 (torr, mm Hg, kPa) or concentration (% saturation, ppm, mg/l, ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For Mitochondria and Cell Suspensions: The base unit houses the fixed-speed solid-state magnetic stirrer. The rear of the unit has attachments for connecting the unit to a pumped source of constant temperature water. The SI130 microcathode oxygen electrode, which forms the floor of the respiration chamber, is inserted from ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For use with custom designed respiration chambers. The electrode holder is a black acetal cylinder in which the electrode is located so that its tip projects from the end. The holder is used for the insertion of the electrode into the customers’ own respiration chamber. An acrylic collar containing an “O” ring on its inside surface is also provided. This can be cemented over a ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
Ever wished you could find out what the bacteria in your Wastewater Treatment Plant were up to right now? Well now you can, and what’s more your hand-held portable AS sampling analyser can: Show you how healthy your bacteria really are, and how this compares with the last 10 times you tested your bacteria at a particular point in your plant. Determine the respiration of your AS at your ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The SI929 is a complete system for replicate measurements of dissolved oxygen, together with data recording and analysis by computer. Use of this system will result in considerable time saving in both respiration experiments and in dissolved oxygen monitoring situations. The system comprises a microprocessor-based interface which accepts up to six 1302 microcathode oxygen electrodes, and ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For small volume measurements of oxygen uptake rate by microbial suspensions, cell suspensions, mitochondria or enzyme preparations. The electrode holder (supplied with the cell) slides into one of two glass tubes fused into the glass water jacket. The second tube is used to park the electrode holder when changing solutions. The volume can be varied by rotating the electrode holder through the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For small volume replicate respiration measurements of oxygen uptake by microbial and cells suspensions, mitochondria or enzyme preparations. The respirometer comprises a sealed water bath containing six respirometer cells located above a six-position magnetic stirrer. A black acetal electrode holder, with a 5mm hole in its tip through which the membrane of the SI130 electrode protrudes, makes a ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
SB100 Stock Flask is used to capture water after rinsing off the electrodes in between sample ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
To prepare, add the contents of one small bottle of sewage to 250ml of deionised water. Can be stored at 5 degrees Celsius for one week after preparation. 40 small bottles with our specially formulated synthetic ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The oxygen content of blood can be measured accurately and quickly by the method of Tucker (1967). A small sample of blood is introduced into the chamber containing a solution of ferricyanide. The resulting release of bound oxygen produces an increase in PO2 which is detected by the oxygen electrode. The oxygen content can be calculated from the PO2 change. The base section of the TC 500 is ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For small volume measurements of oxygen uptake rate by microbial suspensions, cell suspensions, mitochondria or enzyme preparations. The electrode holder (supplied with the cell) slides into one of two glass tubes fused into the glass water jacket. The second tube is used to park the electrode holder when changing solutions. The volume can be varied by rotating the electrode holder through the ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
For continuous in-line oxygen monitoring or for connection to a flow-through respirometer chamber. The acrylic chamber of the flowcell forms a threaded connection to the integral electrode holder. Only the tip of the electrode projects into the water flow. The inlet and outlet tubes are made from stainless steel. To enable the flowcell to be immersed below the surface of the constant temperature ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
This is a Clark-type polarographic electrode, with a 22 micron diameter platinum cathode and silver/silver chloride anode, connected by a buffered potassium chloride electrolyte solution. In the normal configuration the cathode is covered with a relatively low permeability polypropylene membrane, in order for the electrode to be used in unstirred solutions or where minimal stirring is required. ...
Manufactured by:Strathkelvin Instruments Limited based inNorth Lanarkshire, UNITED KINGDOM
The model SI782 is a new concept in precision dissolved oxygen measurement. It acts as either a stand-alone oxygen meter or it can be connected to the Strathkelvin respirometry/monitoring software (supplied) on your PC. Either one or two 1302 electrodes can be connected to the meter. The digital display can be set to read in units of PO2 (torr, mm Hg, kPa) or concentration (% saturation, ppm, ...
