- Home
- Equipment
Refine by
Swenson Xprt Equipment & Supplies
16 equipment items found
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
The Swenson top feed filter excels at dewatering and drying crystalline ...
Manufactured by:Swenson Spreader LLC based inLindenwood, ILLINOIS (USA)
Designed for 20,000+ GVW Trucks. 2 separate hydraulic motors power the auger and spinner disk. Hydraulic interlock system prevents access to the auger drive system. Standard inverted V keeps weight off the auger to optimize performance. Remote grease extension to the rear allows for easy lubrication of the front bearing. Heavy duty 7” hard surfaced auger with 3 pitch lengths for even ...
Manufactured by:Swenson Spreader LLC based inLindenwood, ILLINOIS (USA)
Designed for 20,000+ GVW Trucks. Hydraulic driven spreader with 3.6:1 gearbox ratio . Hydraulic interlock system prevents access to the auger drive system. Tapered inverted V keeps weight off the augers to optimize performance. Heavy duty 7” hard surfaced auger with stepped flights. Swing up spinner system allows for quick unloading of material. Optional heavy duty Drop n Lock top screen ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Shell and tube heat exchangers are used for most of Swenson installations. The heating medium is typically steam which is normally condensed on the outside of the tubes to heat the liquor or slurry which flows inside the tubes. Both vertical and horizontal tube heat exchangers are utilized. While vertical exchangers are the most common type, horizontal exchangers are used for installations with ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Increasing energy costs have justified the increased use of mechanical recompression evaporators. The principle is simple. Vapor from an evaporator is compressed (with a positive-displacement, centrifugal or axial-flow compressor) to a higher pressure so that it can be condensed in the evaporator heat exchanger. Various combinations are possible, including single-effect recompression, ...
Manufactured by:Swenson Spreader LLC based inLindenwood, ILLINOIS (USA)
Designed for medium duty pickup and flatbed trucks. Ideal for use by municipality fleets, landscapers, and other contractors. Available in 8-, 9- and 10-foot hopper lengths. Available in hydraulic, dual motor electric, or gas drive options, with drag chain or belt over chain conveyor choices. More maintenance-free materials provide added strength and durability to protect against harsh weather ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
The Swenson flash dryer is suitable for drying a wide variety of materials. The product is dried in a hot gas stream which pneumatically conveys the material through the body of the dryer. This unique feature of the flash dryer allows the dryer to be positioned near the process while the product storage area may be as far as 200 feet away. In a flash dryer, the product is in intimate contact with ...
Manufactured by:Swenson Spreader LLC based inLindenwood, ILLINOIS (USA)
The VBEL eForce electric v-box spreader is ideal for a municipality or contractor looking for a large v-box spreader (26,000+ lbs. GVW) to mount in their dump body or on a flatbed. This spreader is used to spread salt, rock salt, sand, or other fine substances over large areas such as roads and parking lots. The VBEL eForce incorporates all the benefits of an electric drive system while ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Batch vacuum crystallizers are used for applications with very low operating temperatures that can only be achieved by very high vacuum, applications involving relatively small amounts of materials, and applications where the material being processed must be handled on less than a continuous basis. Batch vacuum crystallizers are a convenient and economical choice for these special ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Falling film evaporators are used to concentrate liquids that do not have solids present. The Swenson falling film evaporator is an ideal solution for processing heat-sensitive ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Swenson thermal vapor recompression (TVR) evaporators use a thermocompressor to reduce the steam required per pound of evaporation—ultimately reducing energy consumption and saving ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Surface cooled crystallizers are a type of forced circulation crystallizer. Surface cooled crystallizers are generally used where the solution boiling point elevation is extremely high—as in the case of caustic solutions—or when the temperature level is so low that evaporation by vacuum is ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Steam tube dryers are a type of indirect dryer, which means that the material being dried does not come in direct contact with the heating medium. Known for their simple, reliable, and low-maintenance operation, steam tube dryers are an established choice for a wide variety of drying applications. ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Swenson draft tube crystallizers (DTB) provide superior control over crystal size and characteristics. For superior control over particle size when excessive fine crystals are present, the Swenson draft tube baffle (DTB) crystallizer has been proven highly effective. This type of crystallizer is used in the production of a variety of large-size crystalline materials such as ammonium sulfate, ...
Manufactured by:Swenson Technology, Inc. based inMonee, ILLINOIS (USA)
Swenson’s fluid bed dryers are the best choice for applications where optimum heat transfer efficiency is required for the drying ...
Manufactured by:Swenson Spreader LLC based inLindenwood, ILLINOIS (USA)
Designed for 16,000 + GVW trucks. Separate hydraulic motors allow for independent drive train and spinner control. Integral fork pockets allows for quick spreader installation and removal. Standard inverted V keeps weight off the auger for optimal performance. Two internal and four external baffles allow for precise placement of materials. *requires central hydraulic ...