- Home
- Equipment
Refine by
Tema Xprt Equipment & Supplies
58 equipment items found
Manufactured by:Tema Sinergie S.p.A. based inFaenza (Ra), ITALY
FLEX is a multi-purpose GMP grade A shielded isolator, with vertical laminar flow all over the working area. The cell is shielded with 75 mm of Lead in all ...
Manufactured by:Tema Sinergie S.p.A. based inFaenza (Ra), ITALY
The Flexa-Flexall hot cell is a turnkey system composed of a GMP grade B shielded isolator for synthesis and a GMP grade A shielded isolator for dispensing, in one single hot ...
Manufactured by:Tema Sinergie S.p.A. based inFaenza (Ra), ITALY
KARL100 is the most complete and safest Class A radiopharmaceutical dose administration system available on the international market, with 6 major ...
Manufactured by:SIEBTECHNIK GMBH based inMülheim an der Ruhr, GERMANY
On standard solid bowl screen centrifuges the screening section is connected to the small diameter of the solid bowl cone and the diameter of the screen is identical. This design has the disadvantage of a low volume in the dewatering section of the centrifuge. This leads to a high solids load and the lowest centrifugal force at the solid outlet. The SIEBTECHNIK TEMA TURBOSCREEN screen bowl ...
Manufactured by:SIEBTECHNIK GMBH based inMülheim an der Ruhr, GERMANY
The SIEBTECHNIK TEMA decanter centrifuge is a continuously operating solid-bowl scroll centrifuge in tunnel or pedestal bearing design. Our decanters are individual, functional and versatile. They offer highly efficient separation of even the finest solid materials together with nearly complete clarification of the liquid phase. The wish to further and further reduce the pollutant levels in waste ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
TEMA Process design for continuous Jet bag Filters is based on the process data and local conditions and can be offered “Taylor-made” suitable for the ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
Packed tower scrubbers are used to remove particulate and / or vapor contaminants from an exhaust gas stream by way of dilution or absorption. A packed tower is an efficient method of carrying out mass transfer between gas and liquid phases. Packed tower scrubbers incorporate packing media to facilitate intimate contact between a scrubbing liquid and gas to be scrubbed. Applications are: ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
Venturi scrubbers are used to remove particulate matter from a gas stream. A „Venturi Scrubber“ consist of a contact section called a venturi section in combination with a droplet separator ...
Manufactured by:TEMA Machinery Ltd based inNorthants, UNITED KINGDOM
For a successful separation according to density, especially if there is only a slight difference in density, it is often not sufficient simply to whirl the material around in a counterflow. It is necessary to provide a vertically pulsating flow through the material bed that allows the material to stratify. The SIEBTECHNIK pulsator jigs were designed for separating light and heavy components from ...
Manufactured by:TEMA Machinery Ltd based inNorthants, UNITED KINGDOM
For the continuous grinding the model T 750 k in connection could be used with a special continuous grinding chamber. The throughout depends on the material characteristics and the finess of the grinded material. A dosing unit is available as am ...
Manufactured by:TEMA Machinery Ltd based inNorthants, UNITED KINGDOM
Discontinuous drum mills are applied to fine and micro pulverization (in the micrometer range) and simultaneous mixing of relatively coarse materials (up to approx. 30 to 40 mm) of all degrees of hardness. Depending on the nature of the grinding material, differentiation is made between dry and wet ...
Manufactured by:TEMA Machinery Ltd based inNorthants, UNITED KINGDOM
SLS 200 is intended for the requirements of modern laboratories in respect of a quick, exact, and reproducible grain size analysis of all dry materials for ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
The Tema Process dehumidifier is using a Lithium Chloride salt solution as absorbent. Lithium Chloride is a very strong salt and has an equilibrium curve which closely follows the relative humidity curve of air. The process air will enter the countercurrent dehumidifier and will be dehumidified or humidified in order to maintain this equilibrium. In other words the sprayed salt concentration will ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
A fluid bed is an effective unit to thermally treat powders, crystalline products, pelletized or extruded materials. High heat and mass transfer are obtained as a result of the intimate contact between fluidizing air and ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
Static fluid bed units in continuous and batch type for more uniform materials that do not tend to agglomerate. It is possible to install submerged heat exchangers in a deep static bed. With submerged heat exchangers energy input is both from the fluidizing air as well as from the heat exchangers reducing the size of the equipment and limiting the exhaust air ...
Manufactured by:SIEBTECHNIK GMBH based inMülheim an der Ruhr, GERMANY
The fully automatic transportation of bulk material samples to the laboratory is undertaken by our pneumatic tube systems designed and produced individually for your physical circumstances. The sample material delivered from the samplingsystem is automatically filled into a carrier and subsequently transported to the required position by a tube system that may well be several hundred metres long. ...
Manufactured by:Tema Sinergie S.p.A. based inFaenza (Ra), ITALY
SYNT cell has been designed to host automatic radiopharmaceutical synthesis modules, offering a controlled and safe environment in compliance with the latest GMP guidelines. Its inflatable seals are granting an ISO 10648:2 air tightness while the ventilation system provides a GMP class B clean air environment. ...
Manufactured by:Tema Sinergie S.p.A. based inFaenza (Ra), ITALY
SAFEFLOW is a Class II biohazard safety cabinets with a GMP grade A laminar flow, with different shielding configurations; it is designed for the manual preparation of Nuclear Medicine radiopharmaceuticals injectable ...
Manufactured by:TEMA Process B.V. based inWapenveld, NETHERLANDS
Shaking fluid bed units for continuous operation and suitable for sticky materials with a wide particle size distribution. The shaking motion improves the fluidization and transport of any material within the fluid bed. Drying gas temperature up to 750 °C and product temperatures up to 400 °C are ...
Manufactured by:SIEBTECHNIK GMBH based inMülheim an der Ruhr, GERMANY
The grinding vessels can hold sample batches of 10-1000 cm³ and grind & homogenize the sample material to final finenesses of up to < 40 μm in a single step. This makes sample preparation with a vibrating disk mill the ideal prerequisite for subsequent analysis using an X-ray spectrometer, regardless of whether pressed or melting tablets are produced from the ground samples. The ...