- Home
- Equipment
Refine by
Thermtech Xprt Equipment & Supplies
13 equipment items found
Manufactured by:Thermtech AS based inBergen, NORWAY
The TCC (Thermo Mechanical Cutting Cleaner) converts kinetic energy to thermal energy in a thermal desorption process that efficiently separates and recovers the components of drilling waste whilst preserving the original quality of the components prior to treatment. As a result the recovered base oil can for example be re-used in new Oil Based Mud (OBM) or as fuel for diesel engines, whilst the ...
Manufactured by:Thermtech AS based inBergen, NORWAY
The TMD (Thermo Mechanical Dryer) is a thermo-mechanical dryer for treatment of “difficult to dry” or "sticky" materials. The TMD process is patented and has shown excellent results on materials with sticky behaviour during drying. In the TMD the heat required for the evaporation is generated directly in the material by a high-speed rotor. This dryer is excellent on most types of ...
Manufactured by:Thermtech AS based inBergen, NORWAY
The TMP (Thermo Mechanical Pyrolysis) enables different methods of pyrolysis with higher efficiency due to a high heat transfer surface area created by the fluidized bed in the process chamber. This patent pending method has been proven as a very effective method for pyrolysis of plastics such as PEHD, PELD, PP etc. In addition, rubber has been converted to oil by pyrolysis process. ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
Industrial companies using a steam boiler require some type of boiler feed water treatment system to ensure an efficient process and quality steam generation. The most appropriate boiler feed water treatment system will help the facility avoid costly plant downtime, expensive maintenance fees and boiler failure as a result of scaling, corrosion, and fouling of the boiler and downstream ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
Waste heat boilers are often used to raise steam or hot water by utilising the heat from hot gases exhausted by high energy equipment such as gas engines, turbines, incinerators and regenerating furnaces. A waste heat boiler economiser can be retrofitted onto the exhaust ductwork of the boiler to further cool down exhaust gases and so preheat the boiler feed water. The uplift in boiler efficiency ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
We achieve this through the design, manufacture and installation of bespoke Heat Recovery Systems. By identifying the source and quality of your waste heat, we will propose a practical and cost-effective solution that redistributes energy and reduces ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
A typical natural gas fired 3-pass shell boiler raising steam at 10 bar g will exhaust flue gases to atmosphere at approximately 230°C making it a valuable source for heat recovery. The treated water fed to the boiler from the storage tank is typically maintained at a temperature of 80-85°C. ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
A hot water boiler economiser recovers otherwise waste heat from the boiler exhaust gases in order to preheat hot water return flow to the boiler. Recovering this waste heat will reduce the boiler fuel consumption and CO2 emissions for the same hot water output in the region of 4-6%. To maintain a single serpentine economiser design with an economical finned tube size, a shunt pump is introduced ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
A Pressure vessel can be used for a wide variety of applications including water treatment, food manufacture, scientific research and industrial manufacturing. Creating these pressure vessels requires flexibility as well as considerable manufacturing expertise. Pressurised containers are required to meet a variety of specifications and certifications such as the pressure equipment directive and ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
Condensate Vessels are available in carbon steel and stainless steel ...
Manufactured by:Thermtech AS based inBergen, NORWAY
For new materials and application areas Thermtech offers small scale testing at the R&D facillity at Mongstad outside Bergen, Norway. The test unit has a flexible configuration and can easily be adapted to meet customer ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
The gas cooler transfers the heat from the exhaust gases into thermal oil, which is then pumped to an air or heat recovery unit or to an air blast cooler where the hot air is discharged to atmosphere. Dirty gases are accommodated by using the integral soot blowers. The cooled oil is then returned to the gas cooling system in a closed loop “run-around” system. Manufactured to BSEN ...
Manufactured by:ThermTech Limited based inAshton-under-Lyne, UNITED KINGDOM
An Electrostatic Precipitator (ESP) is a highly energy efficient abatement solution for oily smoke fumes, using only 30 Watts/1000m3/hour, compared to an incinerator at 3KW/1000m3/hour. The oily fumes are usually generated at high temperatures and the ESP works at low temperatures. The Heat Recovery system required to cool the gases is a valuable source of income to offset the equipment ...