- Home
- Equipment
Refine by
Thermcraft Xprt Equipment & Supplies
17 equipment items found
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Multi-Door Recirculating Oven has an internal heated chamber size of 180″ W x 82″ H x 72″ D. The maximum operating temperature of 177°C (350°F) is achieve using 100 kW rated heating elements. Door switches and a blower rotation sensor protect the air circulation system and heating elements. Temperature uniformity is calibrated at ±10°F per AMS 2750 ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Vertical Split Oven has an internal diameter of 46″ and a heated length of 80″. The split clam shell design is unique and allows for large cylindrical shaped product to be easily loaded/unloaded for thermal ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Bottom Loading Elevator Hearth Furnace has a hydrogen atmosphere system. Dual crucibles on each side are used to control the cool-down rate of the ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Dual Car Bottom Elevator Hearth Furnace is designed for maximum throughput. Three temperature zones have a combined 180 kW power rating. The heated chamber is 44″ W x 20″ H x 192″ Long and can reach a maximum temperature of 982°C (1800°F). Each hearth is capable of supporting a 3000 pound ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
The Hinged Split Tube Furnace shown here is available with I.D.’s ranging from 0.75” to 36”, and almost any length. They can be designed with single zone or multi zone configurations and maximum operating temperatures of up to 1200°C ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
Large-scale with a low factory footprint, Thermcraft’s Adjustable Shelf Recirculating Oven combines an expansive heating chamber with minimal workshop invasiveness. Custom designed for a specialist application, the Adjustable Shelf Recirculating Oven featured shelves that could be vertically adjusted depending on the load configuration. It required no extensive ducting nor connection to ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Gas Fired Box Furnace has a 48″ H x 60″ W x 84″ Deep chamber. It has 6 direct fired burners that produce a total of 2.4 million BTU’s and up to 1260°C (2300°F) operating ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
The Dual Chamber Tool Room Furnace displayed here has a temperature capability of 1260°C (2300°F) in the upper chamber and 677°C (1250°F) in the lower chamber. Shown with optional roll-out quench tank, roller hearth and pneumatic door ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
Thermcraft’s Hinged High Temperature Split Tube Furnaces are for applications that need temperatures up to 1530°C (2800°F). We can customize our tube furnaces to be single zone or multiple zone configurations, and design them for vertical or horizontal operation. The furnace pictured has (SiC) silicone carbide heating elements. Higher temperature furnaces can be designed with ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Dual Chamber Front Loading Box Furnace also has two doors in the rear for unloading. Designed for heat treating in an oxygen free environment, this furnace has an atmosphere control system with flame curtains low explosion level ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
Floor Stand: This Floor Stand Box Furnace has a double pivoting hinged door that keeps the high temperature interior face of the door away from the operator for safety. This type of box furnace is typically designed for industrial use, but can be used in an R&D or laboratory environment as ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Front Loading Box Furnace has a PLC controlled automatic manipulator to load and unload product. The furnace operates at temperatures up to 1200°C ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
Using an innovative dual-drawer design, the Drawer Oven from Thermcraft is an ideal solution to high-temperature thermal processing of large-area sheets and batches of small flat components. Each of these drawers can be individually loaded and unloaded without interrupting the process, while four distinct temperature control zones provide the precise fine-tuning of heating parameters. These are ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
The XSB ashing furnaces are designed to provide ideal conditions for complete combustion of test samples. They have a hinged vertical lift door that keeps the hot door insulation always facing away from the operator. A door safety switch interrupts power to the heating elements when the door is opened. These furnaces use wound wire heating elements that are protected by hard ceramic plates. The ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
ASTM D874 is the standard test method for sulfated ash from lubricating oils and the additives they contain. The sulfated ash is measured as it can be used to indicate the concentration of known metal-containing additives in new oils. These additives often contain one or more of the following metals: tin, sodium, potassium, zinc, magnesium, calcium, and barium. When phosphorus is absent these ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This Table top Shelf Oven is for low temperature operations. It’s compact design with integrated control system easily allows for table top or bench top use. It has a maximum temperature of 180°C ...
Manufactured by:Thermcraft Inc based inWinston Salem, NORTH CAROLINA (USA)
This unique Drawer Oven has two drawers that slide out on rollers to accommodate thermal processing of long flat parts or multiple smaller flat parts. The drawers can be loaded and unloaded individually without interrupting the thermal processing cycle. Four temperature control zones allow for greater process control and a data recorder logs the process in real ...