- Home
- Equipment
Refine by
Trimmertrap Xprt Equipment & Supplies
12 equipment items found
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
Install the Gate Grabber on your trailers and give your back a break! With just a small investment in time and money you can put an end to the back straining task of raising and lowering a trailer's ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
The HS-1 will secure and protect both single and double edge hedge trimmers of any length. The vertical position uses less trailer space and stores the trimmer up and out of the way, preventing damage. Trimmers with blades 24 inches and longer can be locked in place by simply attaching a standard padlock to the blade. A "thru hole" for a locking pin can be used to secure shorter ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
Backpack sprayers are difficult to deal with when not being used. They fall over and slide around in the back of your truck, spill, and get broken and run over by other equipment. The SR-1 will prevent all of these problems. Works for most Solo, Lesco, Echo and other brand sprayers with the round tubular frame. Heavy gauge 1 1/2" square tube provides super strength and the plated finish resists ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
Used in conjunction with either the TT-1, TT-2 Original or TT-2 PRO-4 (open version) trimmer racks the HT-1 is the low cost answer to storage of rakes, shovels, brooms, etc. Simple bolt on installation will fit existing TrimmerTrap Trimmer ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
Provides absolute security for your backpack blowers. Simply hang your blower on the hook. The automatic latch with stainless steel spring positively secures the blower. Backrest has holes for attaching an optional stretch cord, and our RC-Rubber Clamp is perfect for securing blower ...
Distributed by:Stens Corporation based inJasper, INDIANA (USA)
padlock. Heavy gauge welded steel construction is plated for corrosion resistence. Does NOT include mounting hardware. Mounts on open or enclosed trailers. Designed specifically for the Stihl 500 and 600 series blowers. Simply set blower on lower posts and pivot the top toward the rack, allowing the sliding lip to slide under the handle. Complete installation by pulling the ball knob on the rack ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
The GP-1 is a multipurpose rack designed to secure most any style backpack blower or sprayer. It is available as an open or enclosed trailer version to meet the needs of just about everyone. The bottom retention bracket has different height settings and can also be adjusted laterally to provide a snug, custom fit. Each rack includes a custom strap that is widely adjustable using the attached ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
Designed specifically for the D.O.T. approved NO-SPILL brand 5 gallon gas can. The TrimmerTrap FH-1 (Fuel Can NOT Included) securely holds the gas can and is fast and easy to use. Heavy Duty construction assures years of service. Extra heavy gauge welded steel construction and durable zinc finish. Includes heavy duty strap with cam buckle secure gas ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
The ST-2 is the only rack designed specifically for the Early Style STIHL 500 & 600 Series blowers. Simply set your blower on the lower posts and pivot the top toward the rack, allowing the "sliding lip" to, slide under the handle. Complete installation by pulling the ball knob on the rack and lowering the "sliding lip" over the blower. The blower is secured at the top and bottom and will not ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
The MR-1 Trimmer Clamp was designed to be used for transporting trimmers on slow speed, off road vehicles or stationary applications only. You can quickly load and unload trimmers with the flip of a single lever. The adjustable spring loaded jaws clamp down tight for a firm grip on almost any line trimmer or stick edger. The MR-1 can be mounted to utility carts, stand on mowers and/or zero turn ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
This is the blower rack to have when space and strength are important. The easy to use automatic positive latching mechanism is 'Fast and Foolproof'. Simply pull up on the latch mechanism and push back rotating arm to load or unload blowers. Constructed using 1 1/2' steel tubing and heavy duty components, the DB-1 is rugged enough to stand up to years of heavy commercial ...
Manufactured by:TrimmerTrap, Inc. based inLouisville, KENTUCKY (USA)
Most damage to handheld blowers, hedge trimmers, and chainsaws occurs during transport, not use! The combination rack will increase the useful life of these tools by protecting them from the abuse they receive bouncing around in the backs of trucks and ...