- Home
- Equipment
Refine by
Tyne Xprt Equipment & Supplies
11 equipment items found
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
This plant was designed and built by Tyne to take hydrocarbons containing tritium, and to separate out the carbon. This is done by first heating the hydrocarbons to high temperature over a catalyst with an abundance of oxygen to reduce the organics to carbon dioxide and water. The carbon dioxide together with excess oxygen will be filtered, dried, monitored for tritium and released to ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
The Tritium Controller carries out the signal processing for multi-range tritium detector heads (ionization chamber with preamplifier). It is operated by a large, touch screen mounted on the front panel, it has an easy-to-read display and a full set of menu ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
The 1000 cc Ion Chamber is designed to be an in-line radiation in a process gas detector with the most typical application being Tritium. The inlet and outlet VCR 8 connectors allow the chamber to be easily mounted into an existing process line. The internal anode is connected to a floating BNC which can be biased up to 100 V. The high resistance ceramic of the feed through allows the ionization ...
Manufactured by:Southern Scientific Ltd. - a LabLogic Company based inHenfield, UNITED KINGDOM
The Tyne TAM is an installed, dual ion chamber, tritium-in-air monitoring system for stack or plant monitoring. ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
Tyne's replacement power supply for the SDS2 Trip Computer CPU was designed to satisfy the demanding Nuclear Technical Specification of the original power supply that has been in service for 30 years. The new model has a completely redesigned circuit board using high quality, modern electronic components. Nuclear power plant owners have expressed recent concerns regarding the quality of ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
Tyne's strength lies in its ability to both design and build tritium systems. For complex tritium systems it is this combination of skills which makes Tyne a better more practical designer, and a cautious and understanding manufacturer that is more aware of the consequences of inadequate manufacturing or ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
Tyne has been doing pilot plant design and manufacture of complex, process plants for its clients for around twenty ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
Tyne's In-Core Amplifier Model 7007 provides the same functionality and form factor as existing In-Core Amplifiers, and at the same time improves the performance by using upgraded military components. Higher accuracy / linearity and higher reliability have been proved by the successfully completed functionality tests (results available on ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
Tyne's Response Time Monitor is designed to measure the actuator response time from 'Start' signal to 'Feed back'. It also provides an alarm when the response time is over the limit. The circuit is designed with a hardware logic integrated circuit. No software is used. The display comprises four 7-segment LEDs to display from 0.01s to 99.99s. The setting is established using BCD switches with ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
The concentrator is part of a system to remove tritium from water. It starts with purification to make sure the water is suitable for the next stage in the process. An electrolyzer converts the water to hydrogen and oxygen gas; and the hydrogen, containing the tritium, is collected separately and is passed through the concentrator. Here tritium rising with the hydrogen isotopes in the ...
Manufactured by:Tyne Engineering Inc. based inBurlington, ONTARIO (CANADA)
This equipment is based on two molecular sieve packed columns, each cryogenically cooled with liquid nitrogen, and can alternatively be heated in small increments along their length. Mixed isotopes of hydrogen from an electrolyzer are batch injected into the system and deposited onto one of the two cooled columns. Temperatures are regulated to allow the isotopes to come off the first column in ...