- Home
- Equipment
Refine by
Ulma Xprt Equipment & Supplies
51 equipment items found
Manufactured by:Ulma Agrícola based inOñati (Gipuzkoa), SPAIN
This is a Centralised heat generation system using natural gas, diesel, biomass, geothermal heat. Water circulates through metal or PVC-Polyethylene pipes as a heat transporting agent, depending on the temperature of the hot water source, the temperature increase requirements and the crop. We offer a wide range of solutions in this area, from basic systems, to the most sophisticated systems ...
Manufactured by:Ulma Agrícola based inOñati (Gipuzkoa), SPAIN
The hot air generators are especially recommended in those cases where there is not an important requirement for continuous heating and as an occasional defence against freezing temperatures. The purpose of this system is to increase the productivity of the crops and their maturity in cold weather, using medium level technology. The distributionof hot air is carried out using fans and ...
Manufactured by:ULMA Forged Solutions based inOñati (Gipuzkoa), SPAIN
Over the past few years, ULMA Forged Solutions has committed to helping create a more sustainable world, allocating many of its resources and using its knowledge and technology in the renewable energy sector. The wind power sector is one of the priorities in the portfolio of large components manufactured by ULMA Forged ...
Manufactured by:ULMA Forged Solutions based inOñati (Gipuzkoa), SPAIN
Our activity does not solely focus on the sectors and products mentioned above. ULMA Forged Solutions’ Technical Department studies all customer needs and works to provide the most competitive solution. Our installations continue to forge parts and components for custom projects in the railway sector and for hoisting elements in the maritime transport and other sectors. ...
Manufactured by:ULMA Architectural Solutions based in
Polypropylene drainage channels for pedestrian use and occasional car traffic, for areas of low hydraulic requirements . ...
Manufactured by:ULMA Architectural Solutions based in
Polymer concrete drainage channels with versatile uses suitable for intermediate loads and road traffic for areas of low and medium hydraulic requirements ...
Manufactured by:ULMA Architectural Solutions based in
Polymer concrete drainage channels for large loads with height ...
Manufactured by:ULMA Architectural Solutions based in
Monolithic polymer concrete channel with built-in grating in a single body, for medium or high loads, specially designed for intense vehicle traffic. Useful for medium-high hydraulic ...
Manufactured by:ULMA Architectural Solutions based in
Monolithic channel made of polymer concrete with built-in, single-piece grating for medium or high loads, specially designed for intense vehicle traffic. Useful for medium-high hydraulic ...
Manufactured by:ULMA Forged Solutions based inOñati (Gipuzkoa), SPAIN
SPACERS are safety devices used during maintenance tasks to isolate the line section (or part of the section) to inspect or replace. Unlike a valve, spectacle blinds act as a permanent blocking device. ULMA spacers are manufactured in accordance with the ASME B16.48 standard or according to the customer’s ...
Manufactured by:ULMA Forged Solutions based inOñati (Gipuzkoa), SPAIN
Flanges are parts designed to join the pipes, valves, pumps and other units (components) in a piping system. In addition, they facilitate access for cleaning, inspection and modification. Two flanges are attached with bolts and a seal between them to prevent any possibility of leakage. There are many different standards for flanges in the market. However, our flanges are manufactured according to ...
Manufactured by:ULMA Forged Solutions based inOñati (Gipuzkoa), SPAIN
Over the past few years, we have grown in a sector with very exacting standards, the aerospace sector, in which our comprehensive, EN9100 certified quality system opens the doors for optimum hot forming processes of top-performing ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
Our forced-air furnace operates at a high efficiency and requires little space. Our furnace burner comes with a pellet burner which is equipped with a fast ignition system. This burner keeps a nice steady temperature and almost zero maintenance. The burner is regulated with a built in thermostat that can be adjusted to the desired room temperature. When the air has reached 60 degrees C the fan ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
Pellets are a versatile fuel for heating all building sizes. The effective calorific value of this pellet is as much as 5.2 kWh / kg, and it has an incredibly fine quality. Pellet sack is a popular product, especially among owners of detached houses, industrial properties and farms. Also used as bedding for animals. Made of cutter chips without additives. We have the possibility to deliver this ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
Our Ulma2000 TCA 2 is a Swedish-made pellet burner and is one of our best-selling products. It helps you to maintain a good ventilation in your house and thus avoid problems such as moisture and bad air. It is adapted to be easily mounted on most boilers on the market and supports as many as five power levels. With an automatic start-up procedure, you get a quick and efficient start-up in just ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
The Ulma ECO 2 30 kW Pellet Burner is an affordable yet reliable product that combines robustness and reliability. It is equipped with a proven ignition element that ignites lightning-fast and has a long lifespan. With an advanced control unit that controls combustion, you achieve good operating economy. The burner can operate between 6-30 kW, making it a flexible choice for different types of ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
Welcome to the future of heating with Scandbio's 6mm pellets. These pellets are made from high-quality wood by-products from Swedish forests, providing a sustainable and efficient heating solution for your home. With a diameter of 6mm, maximum efficiency and easy storage are ensured, making them perfect for all types of pellet boilers, stoves, and burners. Make a sustainable choice for your home ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
The burner is designed to withstand overpressure and comes as standard with a new type of back draft protection. The burner can be run between 15-40 kW and has 5 power levels. It has an internal screw built in and features our reliable ignition element. The burner is supplied with a compressor with compressed air reduces cleaning intervals. Now also as standard with our new touch screen display ...
Manufactured by:Ulma AB based inSvenljunga, SWEDEN
The silo is manufactured in maintenance free Aluzink sheets and equipped with capacitive overfilling level sensor with alarm indication . Inside the silo a damper reduces the risk to crumble the pellets. The silo is ventilated through a roof filter cloth. The silo has 2 cones connected to the bottom outlet ...
Manufactured by:Ulma Agrícola based inOñati (Gipuzkoa), SPAIN
The extractor fans allow forcing the ventilation inside greenhouses when the natural ventilation using roof and/or perimeter vents, does not allow reaching the desired rate of air renewal, which is an innate need for producing crops as well as livestock farms. They are often used in combination with evaporative cooling panels or water misting systems for the purpose of obtaining a certain ...