- Home
- Equipment
Refine by
Vibro Xprt Equipment & Supplies
41 equipment items found
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
The Dynamic compaction technique achieved deep ground densification using the dynamic effects of high energy impacts resulting from the drop of large pounders. The technique was invented and developed by Mr. Louis MENARD. Since the late 60’s, the MENARD Company has applied this technique to thousands of sites for different types of structures and soil conditions (port and airport platforms, ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
Stone columns are formed by inserting a vibratory probe to incorporate granular material into the ground and create vertical inclusions with high stiffness, shear strength and draining ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
The construction of a new embankment or structure induces additional stresses on the ground that can create unacceptable long term residual settlements during the life of the structure or highway. A preloading program can be designed to induce these settlements in an accelerated time frame and therefore minimize the long term residual settlement to within acceptable limits for the ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
Dynamic replacement is an extension of the Dynamic Compaction process that is applicable for use on highly compressible and weak soils. In this application (DR), the tamping energy drives imported, or site won, granular material down into the compressible soils to form large diameter soil reinforcement columns. Additional improvement can be obtained in the underlying layers through the ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
Axial Fan Silencers by Vibro-Acoustics have a conical design which provides reduced horsepower requirements and energy savings when aerodynamically matched to the fan inlet or ...
Manufactured by:William Boulton Ltd. based inStoke-on-Trent, UNITED KINGDOM
It is well-known that the commercial value and performance of many materials is vastly increased by Ultra-Fine Grinding and the Vibro-Energy Grinding Mill is a proven machine for obtaining such materials with high efficiency and at low cost. Grinding is carried out in the Mill by the use of high density Ceramic Media. The requirements for ultrafine grinding are that relatively small forces need ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
Circular Dissipative silencers are labeled “CD” and are typically used with circular duct systems or inline axial ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
When project space limitations cannot accommodate straight silencers, Rectangular Elbow Dissipative (“RED”) silencers can be used to both reduce noise and control pressure ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
To save space and reduce project cost, any silencer can be designed to have different connections and casing geometry to match project ...
Manufactured by:Vibro-Acoustics, by Swegon Group Company based inMarkham, ONTARIO (CANADA)
Addressing noise and vibration issues caused by rooftop units (RTUs) can be challenging. To target all potential noise problems, the complexity of the system must be ...
Manufactured by:William Boulton Ltd. based inStoke-on-Trent, UNITED KINGDOM
Vibratory separators for screening, sieving, sifting, grading and classification duties in all industries including abrasives, agrochemical, brewing, ceramics, chemical, distilling, food, fuel, glass, latex, metal powder, mineral, paint, paper, petroleum, recycling, rubber and waste recovery ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Consists of a galvanized sheet metal frame, properly formed with lateral strength. The rubber pad at the bottom of the spring acts as a sound break and increases isolation efficiency in high frequencies. The steel spring faces the low frequency excitation. The Vibro–SH can be re - loaded by tightening the nut and the anchor of the suspension must be ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-mini can be combined with a suitable reinforced and modulated galvanized metal suspension hanger, offering vibration isolation on sound insulation gypsumboard ceilings. The hole of the rubberof the Vibro-mini, is Φ8 mm for the pass-through bolt. A long threaded rod could be used in order to adjust the height of the false ceiling. The suspension hanger has grabbling nebs for quick and ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Suitable for raised concrete floating floors. Regulation of height. Avoid remaining plywood forms. Monitoring and easy replacement of spring. Combination of spring and rubber, for better acoustical results. Creates an air-gap, beneficial for the sound insulation and the vibration ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
The Vibro-mini, can be fixed with an anchor on the floor, be suspended on the ceiling through anchors and also be placed on a metal base with a passing through screw of Μ8 mm. Due to its pioneer design, the Vibro-mini gives big deflection when loaded. As it’s known - Larger Deflection Means Better Antivibration Results. The anchor rod of the suspension must be perpendicular. The passing ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
The frame of Vibro CH-R is galvanized metal. The precisely designed incisions provide easy bending of its frame, at certain shapes, that can be achieved by the force of a single hand. Therefore, Vibro CH-R can be easily transformed into 4 different shapes, in order to help the installer to use it in the most favorable ...
Manufactured by:Alpha Acoustiki S.A based inChalandri, GREECE
Vibro-EP Metal consists of an elastic element (dimensions 12.5x12.5 cm) and a specially formed galvanised metal cover. The intercession of the steel covers between the base of the machine and the elastic, this ensures that the equable distribution of the load to the entire surface of the elastic element. At the same time the cover protects the rubber from the solar radiation. At the centre of the ...
Manufactured by:Dehsetiler Makina based inAfyonkarahisar, TURKEY
Vibor seperators are used to remove the impurities from the grain by vibrating sieves. According to the kind of grain, they are equipped with air channel or tarar to remove dust from the ...
Manufactured by:WRAG based inRocester, UNITED KINGDOM
The VIBRO 100E post driver, our base model, offers the operator a simple machine, when coupled to an excavator great flexibility and operational simplicity. The 100E post driver needs a minimum of 4500kg weight class excavator and offers the capability to drive metal, wood and plastic posts. For long posts the vibrating head extends 1150mm above the maximum bucket pin height. The machine requires ...
Manufactured by:Menard Vibro based inDubai, UNITED ARAB EMIRATES
The Controlled Modulus Columns (CMC) technique is used to improve the soil characteristics of a compressible soil layer on a global scale and to reduce its compressibility by use of semi-rigid soil reinforcement columns. Unlike a piling solution which is designed to support the entire load of the structure on the piles, the objective of a CMC solution is to increase the stiffness of the soil mass ...