- Home
- Equipment
Refine by
Watertrak Xprt Equipment & Supplies
9 equipment items found
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
Reverse Osmosis (RO) uses a semi-permeable spiral wound element to remove up to 99% of dissolved solids (TDS) and bacteria from the feed water source. A high pressure feed pump forces raw water into thin film membrane layers thus allowing the permeate product water to collect in the center tube of the RO element. Water containing impurities and salts remain on the outside of the reverse osmosis ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
100 PSI Fiberglass Reinforced Plastic (FRP) Tank. Multimedia Bed (Anthracite, Sand & Garnet). Skid-Mounted Schedule 80 PVC Face Piping. PVC Hub Radial/Header Lateral Internals. Cast Iron Butterfly Valves with Nylon Coated Disc and EPDM Seat or Ball Valves. Thermal Safety Valve. Inlet/Outlet Pressure Gauges. Flow Transmitter on Filter Feed. NEMA 4X FRP Local Control Box. Allen Bradley PLC with ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
46,000 ppm TDS Sea Water 29-177 gpm (6.6 – 40.2 M3/H). Upgrade Options: Single or Dual Stage Multi-Media Filters Considering Type of Feed Water Intake. pH Analyzer on RO Feed. Clean-in-Place (CIP) System. Chemical Dosing Units. Ultrafiltration. Pressure Exchanger Instead of Turbo Charger. Five Element per Pressure Vessel Design for Cases with Limited Space Available. Containerized Option ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
100 PSI Fiberglass Reinforced Plastic (FRP) Tank. Calcite Media for Remineralization. Skid-Mounted Schedule 80 PVC Face Piping. PVC Hub Radial/Header Lateral Internals. Cast Iron Butterfly Valves with Nylon Coated Disc and EPDM Seat or Ball Valves. Thermal Safety Valve. Inlet/Outlet Pressure Gauges. Flow Transmitter on Filter Feed. NEMA 4X FRP Local Control Box. Allen Bradley PLC with Panel View ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
WATERTRAK Ultrafiltration systems use hollow fiber membranes to remove participants down to 0.1 micron. These systems normally operate at 90-95% recovery. These units can be operated as dead end or in cross flow ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
36,000 ppm TDS Sea Water 38-228 gpm (8.6 – 51.8 M3/H). Upgrade Options: Single or Dual Stage Multi-media Filters Considering Type of Feed Water Intake. pH Analyzer on RO Feed. Clean-in-place (CIP) System. Chemical Dosing Units. Ultrafiltration. Pressure Exchanger Instead of Turbo Charger. Five Element per Pressure Vessel Design for Cases with Limited Space Available. Containerized Option ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
A water filter is used to remove suspended solids or turbidity from the water. These are located in front of demineralizer trains, reverse osmosis units, softeners, etc. By removing this debris in the water, it prevents the down stream equipment from being plugged up when operated properly. Watertrak filters offer a wide range of sizes, materials of construction and configurations to meet all of ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
WATERTRAK Carbon Filters are used to remove Free Chlorine, Chloramines, TOC, Color, etc. from the feed water. By removing these impurities from the feed water, it prevents the downstream equipment from damage due to fouling. A water filter is used to remove suspended solids or turbidity from the water. These are located in front of demineralizer trains, reverse osmosis units, softeners, etc. By ...
Manufactured by:Aquatech International Corporation based inCanonsburg, PENNSYLVANIA (USA)
The Electro-deionization process uses electric current to treat (polish) deionized water from RO systems etc., to ultra-pure standards required for many critical applications. EDI’s will replace the conventional Mixed Bed Polishers and provide several advantages including: Lower capital and installation costs. Easier to maintain. No regenerations required. No handling of harsh chemicals. ...