- Home
- Equipment
Refine by
Aet Xprt Equipment & Supplies
25 equipment items found
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
In conventional clarifiers particles with a higher gravity than waste water will settle down to the tank bottom over time. The closer the gravity of the particles is to the one of waste water as longer takes the settlement process and as larger the clarifiers have to be build. Lamella clarifiers are a very cost effective alternative to conventional clarifiers as they reduce the needed tank volume ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
Fill media packs in biofilm attached growth applications need a support and restraint system. On the one hand, this system must provide enough strength to hold the fill media in position regardless of occurring water and air turbulence. Not only that, but the system must withstand high loadings due to the weight of fill media and Biofilm growth on the fill media surface. On the other hand, the ...
Manufactured by:Alternate Energy Technologies (AET) based inGreen Cove Springs, FLORIDA (USA)
Sku : D-65-32, Name : Direct Open Loop System 65 gallon one AE-32 Collectors, Storage Tank : 65 gallon, Collectors : one AE-32 ...
Manufactured by:Alternate Energy Technologies (AET) based inGreen Cove Springs, FLORIDA (USA)
Sku : AE-24, Name : AE Series flat plate collector 3' X 8', Length : 97.187, Width : 35.187, Height : 3.167, Gross Area : 23.7, Fluid Capacity : 0.8, Dry Weight : 85, Optimum Flow Rate : 0.9, Pressure Drop : 0.003, Btu : ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
AET provides standalone, modular tube settler units consisting of tube settler/ lamella clarifier packs, support structure, effluent troughs, sludge removal and tank. The tanks are available in round or rectangular shapes as well as stainless steel, FRP or PE material. If required, the tanks can be equipped with an additional mixing chamber for chemical ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
AET provides standalone, modular fixed bed reactor units consisting of fill media packs, support structure, aeration, inlet/outlet and tank. The tanks are available in round or rectangular shapes as well as stainless steel, FRP or PE material. If required, we can also supply blowers and ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
Disc, tube and strip diffusers for fixed grid aeration systems available in EPDM, silicone and ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
The Jaeger-aeration retrievable strip diffuser rack systems provide a multi-level system redundancy and a fast and easy way to maintain diffusers without basin dewatering. The diffuser racks can be designed for any tank geometry (rectangular, round, toroidal) and mounted to basin walls as well as bridges or catwalks. Better oxygen transfer of fine bubble strip diffusers and DO load dependent air ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
Turnkey aeration solutions for activated sludge applications ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
Hydrogen Gas sees price hikes at higher purity levels. Cryogenic Purification can be an excellent way to get more out of what you can purchase from your current supplier, or increase capacity of what you can sell at a higher purity for that higher ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
Vacuum Jacketed Transfer Lines (6″+) AET Designs and Manufactures vacuum jacketed transfer lines for the cryogenic industry. This application is utilized to transfer gases/liquids with a low boiling point while shielding them from atmospheric interference. These piping assemblies can also include Flex Segments to help with customer connection point alignment. Transferring cryogenic liquid ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
AET Designs and Manufactures vacuum jacketed transfer lines for the cryogenic industry. This application is utilized to transfer gases/liquids with a low boiling point while shielding them from atmospheric interference. These piping assemblies can also include Flex Segments to help with customer connection point alignment.Transferring cryogenic liquid without vacuum jacketing can cost a large ...
Manufactured by:Aalborg Energie Technik a/s (AET) based inAalborg East, DENMARK
The AET biomass boiler concept is based on 25 years’ experience of steam generation and biomass ...
Manufactured by:Aalborg Energie Technik a/s (AET) based inAalborg East, DENMARK
AET designs and supplies turnkey biomass boiler plants for integration into clients’ CHP and power plants with excellent and well-documented performance and ...
Manufactured by:Aalborg Energie Technik a/s (AET) based inAalborg East, DENMARK
The AET Biomass Power Plant is designed for you who want to produce power and appreciate excellent and well-documented performance and ...
Manufactured by:Aalborg Energie Technik a/s (AET) based inAalborg East, DENMARK
AET designs and supplies turnkey biomass cogeneration (CHP) plants with excellent and well-documented performance and ...
Manufactured by:Aalborg Energie Technik a/s (AET) based inAalborg East, DENMARK
The most important decision in the design of a well-functioning biomass fired plant is the choice of combustion system. The AET Combustion System is based upon AET Spreader Stoker and AET ...
Manufactured by:Aqua Equip Technologies LLC (AET) based inTarpon Spring, TEXAS (USA)
Settled sludge, as well as clearwater, must be continuously removed from the clarifier tank. For sludge removal, different systems are available — sludge agitators in combination with an inclined tank bottom, flushing mechanisms, and rotary or chain scraper systems. Depending on the individual customer’s situation, AET offers support for selecting the right sludge ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
If you find yourself volume-restricted by your suppliers or in a bind with cost, our helium gas purifiers may be right for your facility. Engineered to enhance minimum 15% helium gas to 5N+, our purifiers are ideal for most any location. Most commonly used by specialty gas distribution corporations or scientific/testing facilities to increase earnings or reduce helium loss. Additionally, ...
Manufactured by:Ability Engineering Technology, Inc. based inSouth Holland, ILLINOIS (USA)
If any of the following questions are true for you, you may be in need of a helium recovery system. Do you want to remove air, including moisture, from helium and condition that gas for use in a liquefier? Do you produce ultra pure helium for sale? Do you have a need for ultra pure helium at your facility? Do you utilize helium in a system that would normally be vented? Do you want to re-capture ...