- Home
- Equipment
Refine by
Cimas Xprt Equipment & Supplies
21 equipment items found
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The oscillating sifter is used to remove foreign bodies of different sizes from a granular product flow in process. The machine consists of a metal case to free oscillation, bound to a base structure via suspension with articulated joints. Inside the bed are fixed two sieves with wood structure, removable and easily inspected: the upper separates the product from the impurities of large size and ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The vibrating screen is constituted by a metal outer structure, made with thick tubular, which supports, via anti-vibration elements, the separation chamber. The latter is constituted by a series of plates bolted pressopiegate which constitute the collection basin of the product, superiorly protected by lids. Within the same room is the sieve content, the characteristics of which are variable and ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The coolers horizontal dryers of REO series have been studied specifically for cooling and uniform drying of granular or pulverulent products of any nature. The REO is constituted by a casing consisting of two separate rooms (a drying and a cooling) comprised of four uprights, they raise the whole structure of about 300 mm with respect to the bearing plane, by an air exchanger – steam, an ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The horizontal drum coolers have been designed specifically for cooling and uniform drying of granular or pulverulent products of any nature; They are fitted with suction pump of suitable power able to realize the heat exchange air product that allows the cooling to room temperature. The drum with the fins at each rotation lifts the product and then allowing it to fall in a cascade. During this ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The hammer mill is a machine that has a rigid base adapted to support the moving masses of which is available. On the structure, welded sections, which the seats for the media that support the electric motor connected to the axis by means of V-belt drive. The case supported by the crankcase is constituted by a central body made of thick sheet metal that constitutes the lower part of the grinding ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The trailed low volume sprayer model Blitz 50, with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. Notwithstanding it does not require high power tractors, this sprayer is the best choice for spraying large vineyard extensions.Maximum performance with low operating costs and low ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The articulated low volume sprayer model Link 55, with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. The fan group is mounted on the 3-point hitch frame and the distribution sprayhead is directly fitted on the fan group. The articulated joint to which the trailer with the tank is connected allows the sprayer to turn with a ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The TC chain conveyors are built in steel with flanged sides and bottom sheet interchangeably. The steel chain, with cemented bushings and vanes interspersed with scrapers, is accompanied by guides polizene. Headstock and deflection head are both made of bolted steel elements. On the deflection head are mounted turnbuckles with sliding supports. The crowns, driving and crowds, are mounted on axes ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The vertical mixer is constituted by the cylindrical part, collecting cone, loading hopper to smooth the ground, of relapse for a perfect mixing tube and tubular support legs. ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The horizontal mixer consists of a sheet steel case, with pressed and calendered, externally reinforced with profiles. The heads, which are also made of steel sheet reinforced with vertically profiled, are connected to the case by bolting. The reel of the mixer is constituted by two concentric helices of different diameters and to the contrary, mounted on the central axis. The latter is obtained ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The cylinder is composed of corrugated metal sheet and calendered panels of structural steel with high finish of zincoche it guarantees a long resistance to atmospheric agents. The structure is reinforced externally by sheet steel uprights strutturalepressopiegata of variable thickness and sections. The assembly of the plates and the uprights is done with special high-strength bolts treated with ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The vertical coolers have been specially designed for uniform cooling of the hot diced product just came out from the press. The material to be cooled is introduced into the machine from above, passing through a rotary valve. The hot product falls inside the refrigerator and leans on the lower level, where the grids are installed, one fixed and two mobile, allowing its ventilation and exhaust. ...
Manufactured by:Cimas S.r.l. based inPonte Felcino - Perugia (PG), ITALY
The hammer mill is a machine realized with carbon steel of large thickness and high strength steel, having two side doors for access to the loading chamber, to grids and to hammers. On the structure, in welded profiles, which the seats for the supports which support the electric motor connected to the axis in a direct manner with an interposed flexible coupling. The case supported by the ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The 3-point mounted low volume sprayer model New Plus 42 , with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. Heavy and compact, precise in the applications of the quantities of chemicals, it works easily on the uneven grounds and guarantees high operation autonomy. Maximum performance with low operating costs and low ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The trailed low volume sprayer model Blitz 45, with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. Compact and of great manouvrability,is versatile and reliable as the whole range of CIMA's sprayers. Maximum performance with low operating costs and low maintenance.els Serie S4-S5 fulfil the needs of any ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The 3-point mounted low volume sprayer model New Plus 45, with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. Heavy and compact, precise in the applications of the quantities of chemicals, it works easily on the uneven grounds and guarantees high operation autonomy.Maximum performance with low operating costs and low ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The trailed low volume sprayer model Blitz 55, with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. With its strong structure and high performance, this model guarantees a very good production on large vineyard and orchard crop extensions. Maximum performance with low operating costs and low ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The articulated low volume sprayer model Link 50, with pneumatic atomization based on the "Venturi Tube" principle, performs chemical treatments with a low volume of water. The fan group is mounted on the 3-point hitch frame and the distribution sprayhead is directly fitted on the fan group. The articulated joint to which the trailer with the tank is connected allows the sprayer to turn with a ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The 3-point mounted S420 – S430 serie is compact, easy to use and guarantees the highest level of reliability, with a precise and uniform distribution. The spraying treatment on any type of crops is guaranteed by our broad range of distribution sprayheads for a perfect coverage. Maximum performance with low operating costs and low ...
Manufactured by:CIMA S.p.A. based inMontù Beccaria, ITALY
The 3-point mounted Minisolf is the smallest of our range and guarantees the highest level of reliability, with a precise and uniform distribution. Two distribution sprayheads are available (Espalier and Tendone). Compact, easy to use, low ...