- Home
- Equipment
Refine by
Da Xprt Equipment & Supplies
65 equipment items found
Manufactured by:Da Ros Green s.r.l. based inMareno di Piave, ITALY
The ALPINE belt ralke is suitable for steep slopes and narrow spaces, working both forward and backward to reach every corner. The new ALPINE version is designed to be front-mounted on all tractors built for mountainous ...
Manufactured by:Da Ros Green s.r.l. based inMareno di Piave, ITALY
The 2/4-rotor hay tedder is our flagship model, boasting a quality tested over 50 years. It is suitable for those with limited space or working in mountainous areas with lightweight tractors. It comes standard with balloon wheels and a PTO shaft. The 4-rotor model features two springs that assist in lifting the rotors for road transport. ...
Manufactured by:Da Ros Green s.r.l. based inMareno di Piave, ITALY
The pull type trailed hay tedder comes with an adjustable tow bar and a PTO shaft with a limiter. Easy to connect to the tractor and suitable for large spaces, it is a solid and well-structured tool that we have been producing for over 40 years. It is designed for spreading forage and can work on slopes and uneven terrain, as it is agile and robust. It is available in three versions: with 2, 4, ...
Manufactured by:Da Ros Green s.r.l. based inMareno di Piave, ITALY
The belt rake is suitable for steep slopes and narrow spaces, as it works both forward and backward, reaching every corner. Attached to the three-point hitch of the tractor, it is easily controllable, and its weight does not cause imbalances. We produce it in four working widths to adapt to every tractor, protruding approximately 10/15 cm from the tractor’s rear wheels. It can be supplied ...
Manufactured by:Da Ros Green s.r.l. based inMareno di Piave, ITALY
The belt rake rakes the hay, creating a soft lateral windrow, and can also be used for turning the forage. It is particularly suitable for uneven and sloping terrain as it perfectly follows the working surface. The “Mountain” version is designed to work both in the front and rear of the tractor, equipped with a lowered three-point hitch, extendable balloon tires, and an adjustable ...
Manufactured by:Dust-A-Side Pty Ltd based inCenturion, SOUTH AFRICA
DASProduct is the ultimate solution for dust control and haul road management. To optimise production and hauling at the lowest life-cycle cost, DASProduct remains the product of choice. As the flagship of Dust-A-Side, the principal ingredient in the DASProduct is an emulsified bitumen, that has been applied with great success within the mining industry, forestry, and quarries globally for more ...
Manufactured by:ab medica s.p.a. based inCerro Maggiore (MI), ITALY
The da Vinci robot is the most advanced platform for minimally invasive surgery currently on the market. ...
Manufactured by:Dynamic Aqua Science, Inc. (DAS) based inKirkland, ARIZONA (USA)
The Moving Bed Bio Media is made of Polyethylene Borealis Quality. The AMB Bio Media provided by us is self cleaning and enables excellent surface ratio. The bio-film carrier elements are produced from a material and with a procedure that provided properly stored and used ensures a minimum aging time of 20 years. Our Bio Media can also be used as packing media for water coolers, oil water ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
USB to Bluetooth LE Converter. Comes with a Windows Driver and Supports up to 3 Connections. Wireless Transmission is up to 20 Meters (65 ...
Manufactured by:ICP DAS USA, Inc. based inHouston, TEXAS (USA)
This is a din rail mounting bracket clip for the NS-205 and 7000 series products. Securely fasten your NS-205 to a din rail with this inexpensive accessory. You can also piggy back the 7000 modules on top of each other with this din rail ...
Manufactured by:DAS Environmental Expert GmbH based inDresden, GERMANY
All ESCAPE systems have a small footprint with service and maintenance access from the front and back. Installation is quick and easy and does not require specialised equipment. Operation costs and general safety can be optimised with a process tool interface. ...
Manufactured by:DAS Environmental Expert GmbH based inDresden, GERMANY
Plasma-wet technology is an innovative exhaust gas cleaning process that is particularly effective in treating persistent pollutants such as PFC gases. Plasma-wet systems use direct current to generate a plasma in a nitrogen carrier gas. The core of the process is the transfer of very high energy to the exhaust gas to be cleaned, resulting in its decomposition and thus a highly efficient ...
Manufactured by:Global Analyzer Systems Limited based inCalgary, ALBERTA (CANADA)
A Data Acquisition and Control system (DAS) is the heart of today’s modern CEM System. It is one of the core components that create a successful monitoring system package. The data acquisition system is the bridge between raw analyzer outputs and quality assured reportable ...
Manufactured by:Fol-Da-Tank based inMilan, ILLINOIS (USA)
The Single Lane Tank® facilitates maximum flow rates for water AND water tender traffic. Two or more of our SLT® 2000 tanks will give you maximum capacity on the ground without affecting the opposite lane of traffic. The SLT® is a must for narrow rural roads having little or no shoulder! The SLT® comes in various frames and liner fabrics. Frame sizes are 8'x14'x29" with steel ...
Manufactured by:Intuitive Surgical based inSunnyvale, CALIFORNIA (USA)
Get your hands on our most advanced instrumentation, vision and features such as integrated table motion. The da Vinci Xi is versatile and flexible, with setup automation and guidance that promotes OR efficiency. It provides multi-quadrant access and is used for a variety of complex ...
Manufactured by:Intuitive Surgical based inSunnyvale, CALIFORNIA (USA)
Take advantage of a system featuring cost-conscious options but with the same arm architecture as the da Vinci Xi so you can use the latest instruments and vision technologies. The da Vinci X also includes streamlined setup and port placement. And with modular, common components, the system can grow with ...
Manufactured by:Intuitive Surgical based inSunnyvale, CALIFORNIA (USA)
Focus your approach with a system designed for single-port access. With the da Vinci SP, a single arm delivers three multi-jointed instruments and a fully wristed 3DHD camera for visibility and control in narrow surgical spaces. Streamlined setup, multiple control modes and a dynamic information display are ...
Manufactured by:Intuitive Surgical based inSunnyvale, CALIFORNIA (USA)
Force Bipolar is the first da Vinci instrument with DualGrip technology. Surgeon collaboration aimed at increasing efficiency in da Vinci cases led to a design that features two distinct grip modes. With this instrument you can stay focused on the surgical field, instead of switching to a stronger grasper in the middle of a case. You can use Force Bipolar throughout your case to assist with ...
by:DA Meter – Index of Fruit Ripeness based inBologna, ITALY
The ΔA Meter is a portable instrument for the measurement of the ΔA Index® in laboratory and on the field. This equipment combines simplicity of utilization to good quality of taken measures, and enables either to make immediately use of the obtained data or to store them for a future employment. To that extent, it is provided with a SD Card (having a maximum capacity of 2 Gbyte, ...
Manufactured by:Volac International Ltd. based inRoyston, UNITED KINGDOM
DA Varicool offers more flexible application of DA Ecostable and DA Ecocorn. The inoculant and preservative are applied separately, allowing the preservative to be applied at variable rates depending on the risk of spoilage. ...