- Home
- Equipment
Refine by
Globecore Xprt Equipment & Supplies
32 equipment items found
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
CMM-10RL is designed for regeneration of transformer oils. The oil reclamation process involves the oil flowing through ten columns, ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
GlobeCore’s oil regeneration process restores used oils to a condition close to new oil. This process makes it possible to fill transformers with oil that would otherwise have been disposed of. The oil can be used in the transformer without replacement throughout its entire service ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
CMM-1.0LT unit is designed for thermal vacuum drying and filtration of industrial oils used in lubrication, sealing, hydraulic control systems of gas turbine and gas pumping units, gas engine compressors, and in transformers. In addition to oil purification, CMM-1.0LT may be used for heating and drying the oil-filled electrical ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
CMM-2,0CF mobile oil plant is designed to purify highly water-cut industrial, hydraulic, turbine, transformer oils and other types of industrial oil, as well as diesel fuel, kerosene, and gasoline. The unit is made in explosion-proof design, which ensures its safe ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
The CMM-4,0F unit is an on-site portable filtration unit designed for removal of solid particles from lube and dielectric insulation oils with viscosity of no more than 70 cSt at ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
Essential operation and optimization of BioDiesel Blending systems in a flow is carried out by process engineers of the GLOBECORE company by whom it is developed and delivered on a mass production a number of mixing installations under the name “USB” of compounding of fuels and any liquids (from two to five components) in a flow including with components of a phytogenesis and ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
The GlobeCore Process is performed continuously on most energized transformers without the need to remove, replace, and dispose of contaminated Fuller’s Earth sorbent material. No hazardous waste and one man crew equals lower costs and efficient ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
Ethanol Blending is used in a hydrodynamic blender “USB”. This process allows to present all components at the same time in coordination to a formula.The benefit of this technology is in the following: each element dosing accurate control, substantial reduction of batching process duration, no need in batching vessels for finished product homogenization. In the Ethanol Blending ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
Mixing (blending) of bunkering fuel oil using USB system. USB bunkering fuel oil mixers there are on oil barges, on piers, on the coast or in containers allow to make operators any type of fuel with the very precisely given a task viscosity and ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
STRUCTURE AND PRINCIPLE OF COMPLEX OPERATION ON PRODUCTION OF BIODIESEL (biodiesel)The complex on production of the biodiesel consists of the following installations ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
We are all used to associating power transformers with transformer oil. But in the modern world, electrical companies widely utilize silicone oil as an alternative to mineral based fluids. This is not surprising, considering silicone oil benefits and advantages: Silicone Fluid (or Polydimethylsiloxane silicone oil) features: Higher dielectric strength and temperature stability, low toxicity, low ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM-0.6 portable oil degassing unit can be used for oil filtration, oil pumping, oil heating, and degassing of dielectric insulating oil, as well as removing mechanical impurities and moisture. The processing capacity of the unit is 0.6 ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM mobile oil unit may be used for: Heating electrical equipment that contains dielectric insulating oil with hot oil, for vacuum drying of transformers; and for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment. ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
The CMM-1,2Fr unit is designed to clean oil-based liquids (oils, cutting fluids, working fluids for hydraulic systems of machines and equipment) from mechanical impurities. The unit ensures the purity of liquids in the production, repair and maintenance of equipment of power enterprises, construction and road equipment, engines, machine tools, process equipment, etc. The unit increases the ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The GlobeCore CMM-0.6 Clean Marine unit is designed for purification1 and degassing2 of electric insulation oils3 on sea-faring vessels, off-shore platforms and wind-farms, in ship-works and wharfs. Water and ex-proof design allows to employ the unit in locations with high humidity, on open decks or in environments where flammable materials or explosive dust may form. CleanMarine is a ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM-G unit is designed for a three-stage process of changing oil in wind turbine gearboxes (draining old oil, flushing the gearbox and filling it with new oil). The unit allows for quick and efficient servicing of wind turbine oil system. The unit can be used for servicing wind turbines made by many different manufacturers. The CMM-G can also heat clean ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
GlobeCore regeneration units now offer two (2) revolutionary features: Energized transformer oil processing; and Automatic Sorbent Reactivation. The GlobeCore Process is performed continuously on most energized transformers without the need to remove, replace, and dispose of contaminated Fuller’s Earth sorbent material. No hazardous waste and a one man crew equals lower costs and efficient ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
The CMM-6RL unit is designed for transformer oil regeneration. The regeneration process involves passing the oil through six columns, ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
The CMM-0.6L is designed for heating, pumping and processing electrical insulation and cooling oil (in transformers, on load tap changers, bushings, high voltage switches etc). The process includes removal of particulate matter, gas and water. This machine belongs to the lowest processing rate CMM category (up to 600 liters per ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
The CMMur-1L continues the excellent functionality of this series of equipment, but is designed to be more compact and ...