- Home
- Equipment
Refine by
Hi Q Xprt Equipment & Supplies
93 equipment items found
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The HVP-6000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a touch screen user interface with a maintenance-free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed, maintenance-free motor. The speed of the motor is controlled by a programmable logic controller (PLC) that accepts a signal from a mass flow ...
Manufactured by:OEwaves, Inc. based inPasadena, CALIFORNIA (USA)
Blue laser with ultra-narrow Lorentzian Linewidth and low phase/frequency noise in a compact form factor in the 435 nm – 480 nm range. The HI-Q laser houses a proprietary driver/controller and the OEwaves laser source which is based on a high quality factor (Q) Whispering Gallery Mode (WGM) optical micro-resonator. The laser is available at a variety of wavelengths from 435 nm to 480 ...
Manufactured by:OEwaves, Inc. based inPasadena, CALIFORNIA (USA)
The unique design of the OEwaves HI-Q® VCO is based on photonic generation of spectrally pure signals at millimeter wave frequencies with phase noise that is independent of frequency. This is accomplished with patented technology of semiconductor lasers injection locked to ultrahigh quality factor (Q) crystalline optical whispering gallery mode resonators. The high performance VCO allows ...
Manufactured by:OEwaves, Inc. based inPasadena, CALIFORNIA (USA)
The system provides the user with the ability to phase lock two independent lasers that operate at a frequency difference as large as 50 GHz. The two lasers may both be free-running or one serving as a reference for stabilizing the ...
Manufactured by:OEwaves, Inc. based inPasadena, CALIFORNIA (USA)
HI-Q® RF Test Measurement System (TMS) utilizes microwave photonics techniques for automated measurement of ultra-low phase noise ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against an in-line N.I.S.T. traceable laminar flow ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The V-FLO-XX series units incorporate a flowmeter and a precision-machined venturi tube to create a pressure differential across a fixed orifice which floats the indicating ball in the flowmeter. By varying the flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and traceable to the National Institute of Standards ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
This selectable 12/24 Volt DC Portable Power Source is an excellent source of power for emergency response or routine remote site VDC powered air ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q Environmental Products Company's Custom Mobile Air Monitoring & Equipment Carts have proven to be industry leaders. From the heavy-duty design of the MRV0523CV-ALPHA used primarily to support ALPHA CAM's, to the telescoping equipment platform of the MSC-PLSTC used primarily for the transport of complete battery operated air sampling ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
Since 1973 HI-Q Environmental Products Company’s engineering staff has designed and developed hundreds of “Custom, Turn- Key” Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q’s experience work for ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The Oilless Rotary Vane, Air Sampling Pumps incorporated in HI-Q’s continuous duty air sampling systems have “Lubricated-for-Life” ball bearings which leaves the internal workings virtually maintenance free. The only servicing needed is the occasional replacement of vanes, “O” Rings, filters, and gaskets when they become worn. Many variables determine the life ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q's CMP-Series air sampling systems allow for continuous duty/constant flow rate air samples at operator pre-set flow rates. These continuous duty, constant flow, self contained air sampling systems are commonly used as the primary air mover for gas/particulate collection and/or real time air monitoring. Two face mounted vacuum gauges allow the user to observe pump performance and filter ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
7-Day Electronic Timer; 24 hours x 7 days programming. 16 program steps and cycle operation. Two independent 15 A control circuits. Manual override switch for each output. Easy-to-read, large, 0.5 inch high LCD display. Wide operating voltage range. 10-year battery backup for memory protection. Panel and Surface mountable. Protective cover and custom mounting options available. ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q Environmental Products Company’s Polyurethane Foam (PUF) air sampling system is designed to simultaneously collect both airborne particulate and pesticide vapors. Both the PUF-2000 (Brushed) and PUF-3300BRL (Brushless) Organic Toxics Samplers house a combination 4” diameter paper & glass cartridge “PUF” holder to collect samples at adjustable flow rates between 2 ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
This Portable, Maintenance-Free, Variable Speed, High Volume Air Sampling System is ideal for continuous or intermittent sampling. The “CF-1000BRL” air sampler series have three flow ranges from which to choose. The standard CF-1001BRL unit includes a 1½” female straight-pipe fitting, which accepts all “CF” Series holders (excluding the CFPH-810), and is ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q Environmental Products Company’s AK-Series adjustable Annular Kinetic Impactor Heads are designed for collecting alpha, beta, & gamma-emitting contaminants, plutonium fission, Radon decay products and size specific dust particles. By adjusting the stopping distance (nozzle to impactor plate distance) and varying the particle velocities an operator can collect size specific dust ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
This extremely popular, outdoor rated continuous duty air sampling system is intended for secure outdoor ambient particulate and/or gaseous air sampling. The pump, control valve, and control panel are all hard mounted in a heavy gauge TIG welded aluminum, fully lockable, fan cooled, weather proof enclosure. The control panel houses the power switch, fuse protection, resettable electronic timer ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q’s Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow sampling system – you make the call. Have an existing Stack Flow Rate Monitor? HI-Q’s MASS Unit can easily be linked together with an existing stack-flow monitor to achieve real-time ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
This "Golf Cart" type unit can be used for the assay of both particulates and gaseous radioiodine. Its telescoping "Goose Neck" allows for industry standard breathing zone air sampling. There is a 3/8" female Quick Disconnect fitting at the sampling inlet which accepts all "RV" series filter holders. Two vacuum gauges for measuring pressure differential across the filter media are conveniently ...