- Home
- Equipment
Refine by
Ipec Xprt Equipment & Supplies
22 equipment items found
Manufactured by:JWC Environmental based inSanta Ana, CALIFORNIA (USA)
The PPS Compactor extracts moisture from solids by the compaction of slurry against a tubular screen element with perforated round or slotted holes. Solids are retained on the surface areas and liquid is passed through the holes. Compaction occurs as the solids are transported by a screw. The screw is designed so that pressure is gradually increased during transport, which helps in retaining ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
PrecisePD is an on-line Partial Discharge Spot Testing and Location System for Cables and Switchgear with advanced signal processing, used for the detection of PD in high noise environments. PrecisePD allows users to investigate and locate Partial Discharge sources on live electrical equipment, helping to prevent potential faults in high voltage assets. Designed by IPEC Ltd, the PrecisePD Spot ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The PD-SG1 is a dual transducer Switchgear PD detection instrument. The unit detects TEV signals generated by internal discharge, as well as acoustic discharge generated by surface tracking or corona. Partial discharge activity inside metal clad high voltage plant induces small voltage impulses (called Transient Earth Voltages) on the surface of the metal cladding. TEVs travel around the cladding ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The CC-TEV Capacitive Coupler detects TEVs as they pass over the cladding of the high voltage plant. Fast output signals are recorded by the ASM, PrecisePD or PD-SG1 systems. The sensor is encased in a durable PVC sleeve for added protection. Embedded in the body are powerful magnets allowing for coupling to steel ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The ASM-Portable is a Portable Partial Discharge (PD) Monitor for cables, switchgear, and other high-voltage assets. The unit is part of the IPEC’s wider range of on-line PD monitoring systems. The ASM-P can be configured with up to 32 PD sensor channels. If excessive discharge is detected, the ASM-P raises an alarm that can be configured either locally or by email. This enables the ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The AA Ultrasonic acoustic probe is designed for use on air insulated terminations where a clear sound path between the electrically stressed insulation and the probe is ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
IPEC’s UHF (Ultra High Frequency) sensors are used to detect PD in EHV cable terminations, GIS (Gas Insulated Switchgear). The sensors pick up signals in the UHF range (200MHz-2.5GHz) and are mounted against the insulating barrier spacers that separate components of the HV asset. The sensors work with multiple IPEC monitoring ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The process is based on low-temperature pyrolysis principle, involving the use of heat to thermally decompose hydrocarbon-based material in the condition of oxygen deficit. ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The amount of electricity generated is calculated in each case; depends on calorific value, type and volume of raw ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The amount of electricity generated is calculated in each case; depends on calorific value, type and volume of raw ...
Manufactured by:JWC Environmental based inSanta Ana, CALIFORNIA (USA)
Receiving System Tank Screens Out Solids: TLT Sewage Receiving systems are designed for taking in municipal sewage or septage and screening out solids prior to passing it on for further treatment. The TLT 100-300 products are designed to receive pumped municipal sewage and the larger TLT 400 and 500 are able to also accept septage waste from haul ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
Level-2 systems are supplied with all of the features of a Level-1 system plus OPR monitor/control and additional reagent pumping systems. Level-2 systems are very flexible and can be configured for most applications. Contact us for ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
Our premier Pump and Lift Station, when you need the best! The IPEC Series 500 is a fully integrated pump and lift station combining receiver tank, pumps, valving/piping and automated controls for transferring continuous or intermittent flows of wastewater streams from upstream processes. This is a dual pumping system that is fully automated with multi-level sensor controls and alarms. The ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The PD Alarm is an asset mounted device for indicating the presence of partial discharge in high voltage switchgear, ring main units (RMUs) and dry type transformers. Designed for use in small substations, the instrument can activate local and remote alarms in addition to local ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The HFCT is a high frequency current transformer designed specifically for picking up partial discharge signals, predominantly in cables. It has a split core ferrite to allow retrospective fitting to earth straps without the need for disconnection. The durable body has a hinge and a quick release latch, making use quick and easy. The HFCT is constructed with an aluminium body to provide RF ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The PD Detector is an on-line partial discharge (PD) spot tester for HV assets. The instrument detects TEV signals generated by internal discharge in Air Insulated Switchgear (AIS), acoustic discharge generated by surface tracking or corona, high-frequency signal generated by cable partial discharge, and ultra-high frequency signal generated by internal discharge in Gas Insulated Switchgear ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The ASM is a permanent PD monitor for cables, switchgear and other high voltage assets. The ASM can be configured for any number of PD sensor channels. If excessive discharge is detected, the ASM raises an alarm that can be configured either locally or by email. This enables the long-term assessment of plant conditions to be carried out quickly and easily, from any remote computer. Suitable for ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The process is based on low-temperature pyrolysis principle, involving the use of heat to thermally decompose hydrocarbon-based material in the condition of oxygen ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
1000-Jr Reactors can stand-alone or be integrated with classifiers, pump stations, etc. These units come fully assembled including multi-stage reactor tank, mixers, automated chemical addition pumps and controls with full instrumentation. They can be configured for hundreds of different waste streams besides the ones you see here. Contact us for details. 1000-Jr flow rates can vary from as low ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
1000-STD Reactors can stand-alone or be integrated with a classifier, pump station, filter press, etc. The reactors come fully assembled including multi-stage reactor tank, mixers, automated chemical addition pumps and controls with full instrumentation. As with all of our reactors they can be configured for hundreds of different waste streams besides the ones you see here. Call us for details. ...