- Home
- Equipment
Refine by
Pcb Xprt Equipment & Supplies
34 equipment items found
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
Platinum Stock Products; Miniature, lightweight (0.6 gm) ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz, titanium hsg, 10-ft detachable ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
At PCB, we don't just know the sensor business; we pioneered ICP® technology. For over 50 years, every sensor design and assembly is subjected to tight in-house inspection and quality control. That's why we have impeccable product performance and longevity. And that's what our customers expect from every PCB® ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
Platinum Stock Products;General purpose, ceramic shear ICP® accel., 10 mV/g, 0.5 to 10k Hz, 10-32 top conn. lbf pk (±444 N pk). Hammer Mass: 0.23 lb (0.10 ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
Platinum Stock Products; High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, 10-32 side ...
Manufactured by:PCBMay based inMeizhou, CHINA
Single sided printed circuit boards are a type of circuit board that has the conductive copper and components mounted on one side of the board and the conductive wiring connected on the other side,which is one of easiest ...
Manufactured by:PCBMay based inMeizhou, CHINA
The double-sided board is a PCB with copper etched on both sides including top and bottom layer. Both sides can be wired and soldered, and there is an insulating layer in the middle, which is a commonly used printed circuit board.There're many mass production. ...
Manufactured by:PCBMay based inMeizhou, CHINA
The 6 layer PCB stackup is very populer,normally,there're top signal,inner signal,ground plane,power plane,inner signal and bottom signal,what's more,sometimes there're differ or single impedance controls among the ...
Manufactured by:PCBMay based inMeizhou, CHINA
Are you looking for a quick turn PCB supplier?PCBMay is one of your best choices,who can provide quick turn service for you,such as 48h for 4layer prototypes,so that it won't be delayed your scheduled projects. ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
ESS mini (2 gm), quartz shear ICP® accel., 10 mV/g, 2 to 10k Hz, 5-44 side conn., 5-40 mtg stud, to +325 F/+163 C. Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²)). Measurement Range: ±500 g pk (±4900 m/s² pk). Broadband Resolution: 0.005 g rms (0.05 m/s² rms). Frequency Range: (±5%)1.0 to 10000 Hz. Sensing Element: Quartz. Weight: 0.07 oz (2.0 ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
Triaxial ICP® accelerometer, 50 mV/g, 100 g, 1/4-28 4-pin connector, Adhesive mount, TEDS 1.0, Temp. to +325 °F. Sensitivity: (±10%)50 mV/g (5.1 mV/(m/s²)). Measurement Range: ±100 g pk (±981 m/s² pk). Frequency Range: (+/-10%)0.4 to 10000 Hz. Electrical Connector: 1/4-28 ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
UHT-12™, Charge output accel, high temp to +1200 F, 1 pC/g, 1000 g, 0.46 inch cube, stud mount, with screw tabs, to 10k Hz, case isolated. Sensitivity: (±10%)1.15 pC/g (.117 pC/(m/s²)). Measurement Range: ±1000 g pk (±9800 m/s² pk). Frequency Range: (±10%)10 kHz. Cable Termination: 10-32 Coaxial Jack. Weight: .54 oz (15 ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
Cryogenic Triaxial Accelerometer,10 mV/g, -320 to +250 F, case isolated.1 Hz to 10 kHz, 1/4-28 4-pin connector. Newly launched Triaxial Cryogenic Accelerometer. Sensitivity: (±10%)10.0 mV/g (1.02 mV/(m/s²)). Measurement Range: ±500 g pk (±4905 m/s² pk). Electrical Connector: 1/4-28 ...
Manufactured by:PCBMay based inMeizhou, CHINA
Thermal conductivity 1.0W/mk,ceramic filled,halogen free,MOT 130℃,there's a good bending feature from angle 30° to angle 180°.This thermal conductivty is ...
Manufactured by:PCB Technologies Ltd based inOcean, NEW JERSEY (USA)
We go beyond design limits to offer you cutting edge semiconductor and electronics assembly, testing and IC package design including LGA, BGA and 2D & 3D customized solutions. Featuring fully supported automated processes, MW microelectronics assemblies, System-in-Package (SiP) & heterogeneous integration. We also offer high level expertise in organic substrate design and manufacturing ...
Manufactured by:PCB Technologies Ltd based inOcean, NEW JERSEY (USA)
Advanced Packaging is a blanket term used to describe a general grouping of various distinct methodologies. Advanced Packaging technologies include: 2.5D, 3D, Fan-Out (2D), Wafer Level Packaging and System-in-Package (SiP). SiP is a combination of multiple active electronic components of diverse functionality, assembled in a single unit, that performs multiple functions associated with a system ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration. Click the following for individual component ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration. Click the following for individual component ...
Manufactured by:PCB Piezotronics, Inc. based inDepew, NEW YORK (USA)
UHT-12™, Charge output accel, high temp to +900 F, 0.53 pC/g, 5000 g, to 6k Hz, 10-32 side conn, 5-40 thread mount, case isolated. Sensitivity: (±10%).53 pC/g (.054 pC/(m/s²)). Measurement Range: ±5000 g pk (±49050 m/s² pk). Frequency Range: (±10%)10 kHz (10 kHz). Weight: .31 oz (8.7 ...
Distributed by:Dalimar Instruments Inc. based inVaudreuil-Dorion, QUEBEC (CANADA)
Platinum Stock Products; High sensitivity, ceramic shear ICP® accelerometer, 100 mV/g, 0.5 Hz to 10k Hz, 10-32 side ...
Distributed by:Dalimar Instruments Inc. based inVaudreuil-Dorion, QUEBEC (CANADA)
TEDS 377A13 microphone and 426E01 preamplifier. This model includes a 1/2' microphone cartridge, a mated preamplifier with TEDS, and system calibration. Click the following for individual component ...