- Home
- Equipment
Refine by
Permionics Xprt Equipment & Supplies
10 equipment items found
Manufactured by:Permionics based inVadodara, INDIA
This is a very rugged membrane that has a thin film layer on a polyethersulphone backing. It gives the membrane a characteristic high flux and a tight pore structure making it a low cut off UF ( ~ 5000 Daltons) with PEG 6000 rejection of >95%. Also available in a lower cut off (95% rejection of PEG4000). Alkali stable variant also ...
Manufactured by:Permionics based inVadodara, INDIA
These are non-polyamide, cross linked PES membranes that are stable across 0-14 pH up to 20% NaOH concentration. Moreover these are chlorine sanitizable so are ideal for food and beverage applications. The ability to pass chlorides without much resistance coupled with high divalent salt rejection makes it an excellent membrane for separation of chlorides and ...
Manufactured by:Permionics based inVadodara, INDIA
The HFT series is a polyamide chemistry based Nanofiltration membrane available in three molecular weight cut offs at present; 100-150 Dalton; 200-300 Dalton; 300-400 Dalton; 600-800 Dalton. HFT 150 being the tightest of them all, behaves more like a lose RO. So when you need only concentration, it is ideal. All other membranes above that cut off are meant for fractionation or even just ...
Manufactured by:Permionics based inVadodara, INDIA
All membranes are available in flat sheet and spiral wound construction with different variants. Elements are available in the following variants: Alcohol Stable. High temperature stable. Net outer wrap for sanitary application in 8038/3838 sizes. Net outer wrap in standard 8040/4040 ...
Manufactured by:Permionics based inVadodara, INDIA
Industrial R&D laboratories, Research Institutions and Universities require small scale table top and laboratory pilot systems. With its experience in piloting and membrane development we have designed multipurpose pilots ranging from flat sheet to slightly larger scale systems incorporating small 1.5” diameter ...
Manufactured by:Permionics based inVadodara, INDIA
In our Unique Hydrophilized PA RO membranes which have neutral charge and smooth surface, the additional coating on the membrane is what makes the difference. Our turboclean design coupled with the HPA membranes are revolutionary operating on high turbidity feeds with high COD and BOD. The best proof is in testing the waters which Permionics has done over the past fifteen years with over 1000 ...
Manufactured by:Permionics based inVadodara, INDIA
These are membranes used in Ultrapure water systems as well as in applications where the temperature of feed streams are > 50°C and a maximum of 70°C. USP grade water production systems is a typical application for these elements where hot water sanitization is required at 80°C. Other applications are where high temperature Ultrafiltration/Nanofiltration permeates need to be ...
Manufactured by:Permionics based inVadodara, INDIA
These are non-polyamide, cross linked PES membranes that are stable in mineral acids like Hydrochloric acid, Sulphuric acid, Nitric acid and Phosphoric acid. Moreover these are chlorine sanitizable therefore are ideal for food and beverage applications. The ability to pass chlorides coupled with high heavy metal rejection makes it an excellent membrane for separation of heavy metals from ...
Manufactured by:Permionics based inVadodara, INDIA
A new series of ultra-low pressure membrane elements for low TDS feed waters operating at half the pressures than the standard BW RO membranes keeping the rejection levels intact. The data below for the 8040 and 4040 elements clearly defines the superior performance of these ...
Manufactured by:Permionics based inVadodara, INDIA
These are extended area sea water membrane elements available in two variants; 1) The uncoated membranes for UF treated sea water; 2) The surface treated membranes for high fouling high TDS waste waters as well as for direct sea water desalination ...