- Home
- Equipment
Refine by
Plp Xprt Equipment & Supplies
11 equipment items found
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
The Coated Dead-End is designed for direct application over conductors jacketed with neoprene, polyethylene, vinyl, or rubber. The sub-setted rods in each leg, bonded together with neoprene, exert a low radial pressure to prevent damage to the jacket. Because it is not necessary to skin the plastic covering, the same dead-end can be used for either aluminum- or copper-based covered ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
The INSULIGN Guy Strain Insulator series is intended for use with down guys or pole-to-pole guys on overhead lines. The insulative fiberglass rod electrically isolates the guy strand and provides electrical clearance for maintenance crews and the public during normal ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
The PREFORMED™ Wrap-Around Guy Marker is designed to identify down guys or other wire and cable installations where anchoring devices are exposed to pedestrian and/or vehicular ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
ARMOR RODS are designed to protect cable against bending, compression, abrasion, and flash-over. They are also used to repair damaged aluminum-based conductors and restore the conductors' mechanical strength and ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
The Coax Drop Wire Closure is designed for direct buried splicing of coax cable and is an excellent solution for coax cable repairs. It is available in two sizes and holds a variety of standard coax connectors and couplers. POLY-BEE Sealant is used in the closure for maximum environmental ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
PLP pioneered the helical formed wire design in the 1940s and shortly thereafter the GUY-GRIP Dead-End was born. Still an industry standard today, the GUY-GRIP anchors millions of utility poles all over the world. The GUY-GRIP is intended for use on single wood poles associated with distribution construction. They are made of the same material as the strand to which they are applied and are rated ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
The VORTX Vibration Damper responds to wind-induced line vibration that is characterized by high-frequency, low-amplitude motion commonly known as aeolian vibration. The large and small weights of the VORTX dampers can achieve greater power dissipation and frequency response performance than "symmetrical weight" Stockbridge damper designs. Wider frequency coverage translates into better span ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
Preformed Line Products Cable Separator is for use with Triplex or Quadraplex Cable. They are lightweight and easy to install. The unbreakable black polypropylene material is noncorrosive and UV ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
Conductor Splices are designed as a single-component outer-layer assembly generally for Sub-EHV applications. Consult PLP for details on Conductor Splices for EHV ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
The Ratchet Spacer is intended for use on overhead spacer cable distribution systems that utilize jacketed conductors being supported by a messenger used as the system neutral. The messenger can be up to 0.750" in diameter and the phase conductors can be up to 2" in diameter. The PLP Ratchet Spacer meets industry-accepted electrical and mechanical criteria as well as ASTM material specifications ...
Manufactured by:Preformed Line Products (PLP) based inCleveland, OHIO (USA)
ACSR Full Tension Splices are designed as a three component assembly generally for Sub-EHV applications. Consult PLP for details on ACSR Full Tension Splices for EHV ...