- Home
- Equipment
Refine by
Scanivalve Xprt Equipment & Supplies
10 equipment items found
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The DSA5000 pressure scanner is a versatile, all-in-one data acquisition system. Each DSA5000 uses a pressure sensor per channel architecture. All data acquisition, data conversion, and communications are handled by the integrated process and A/D converters. Unlike any other pressure scanner available, the DSA5000 utilizes an individual A/D converter for each sensor allowing fully synchronous ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The model DSA3307-PTP Digital Sensor Array pressure acquisition module incorporates 2 to 16 temperature compensated media isolated piezoresistive pressure transducers. These transducers are isolated from the media on both sides by a 316L stainless steel diaphragm (wet/wet). Each DSA-PTP module also contains RAM, a 16 bit A/D converter, and a microprocessor in a compact self-contained module. The ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The MPSTCU is intended for use in situations where thermal conditions are outside the operating range of a standard MPS module (0-70°C). The MPSTCU utilizes an optional internal heater circuit which provides a stable environment for the MPS, allowing it to operate at much colder temperatures. An optional Cooling Kit is available when the MPSTCU is to be used in higher temperature environments ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The MPS4200 Series is a family of miniature Ethernet pressure scanners designed for accurate, high-speed pressure measurement in a compact package. These scanners are available in 16, 32, and 64 channel configurations and provide digitally conditioned and temperature compensated pressure data over an Ethernet interface, simplifying integration into modern data acquisition systems. Each unit ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The model DSA3207-PTP Digital Sensor Array pressure acquisition module incorporates 2 to 16 temperature compensated media isolated piezoresistive pressure transducers (psig or psia). This model contains a stainless steel diaphragm isolating the measurement side of each pressure transducer from the media. The back side of the gauge transducer must be dry ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The Model ZOC17 electronic pressure scanner accepts 8 or 16 pneumatic inputs. Each ZOC17 module incorporates 8 or 16 piezoresistive temperature compensated pressure sensors. These pressure sensors are manufactured in a vibration resistant can, which makes for easy field replacement, thus minimizing downtime in the event of sensor damage. The ZOC17 electronic pressure scanner also contains a ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
The MPS4000 series miniature pressure scanners have been designed from the ground up to be a ‘game changer’ in the world of multi-channel miniature pressure measurement. The MPS4164 scanner is built around a brand new ultra-stable pressure sensor. Scanivalve has worked directly with a leading pressure sensor manufacturer to develop a custom packaging solution that allows us to ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
Model DTS4050/64Tx, Digital Temperature Scanner, is a multi-channel thermocouple scanner. Available channel configurations are 16, 32, or 64 channels. The DTS incorporates RAM, Integral Low Pass Filters, 22 bit A/D converters, and a microprocessor, all in a rugged stand alone scanner. An isothermal block is incorporated for the Uniform Temperature Reference (UTR) for each channel input. NIST ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
ECM4000 – Ethernet Control Module The ECM4000 was designed to support a wide range of pressure measurement system configurations. It provides a single point of communication for multiple pressure scanners as well as a simple solution for managing control pressures to the scanners. The ECM4000 is built around a core function of creating and executing scripts which can include responding to ...
Manufactured by:Scanivalve based in, WASHINGTON (USA)
Power Distribution Module can be used to provide DC power to a single Scanivalve device. The following Scanivalve devices are directly compatible: all DSA and DSA-PTP, all DTS, all DSM, ECM4000, MPS4200 and ES4000 modules. The PDM1500 includes a 10 foot power cord for DSA/DTS/ECM/DSM modules, and a 5ft power cord for MPS4200 modules. Power cords can be special ordered in different lengths if ...