- Home
- Equipment
Refine by
Schlueter Xprt Equipment & Supplies
34 equipment items found
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Part# 23057: Less is more!! Ultra-modern design uses up to 33% less wattage than previous models. With no redundant gaskets or fittings to deal with, the tuned port pulsator can be fitted with a new service kit in less than three minutes, saving a great amount of time during scheduled maintenance. Tuned port pulsators can be micro-adjusted to satisfy any liner shell ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Multi-Purpose PLC Controller with Touchscreen Adjustments. Automatic Pipeline Wash System. CIP process made incredibly simple with pre-programmed multi-function PLC and easy setting of cycle times, transitions, etc. 4 inputs and 10 outputs to control many devices. 3-A and HACCP Standards. 5 Pre-programmed Washing Systems Choose pre-installed program you wish to use Safgard™ Programmable ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Parts Include: White diaphragm, large seal (2) required, red silicone seal, rubber plug, small thin black “O”ring, SS plate, SS insert, SS spring, plastic threaded nut, and SS ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Improved bowl with bottom bumper to protect against breakage. Automatic vacuum shut-off locks in place for ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Features: Optimizes pre-cooler performance using up to 50% less water. Automatic adjustment with 3 speed ranges for minimum milk flow, maximum milk flow, and wash. High pump speed on low level float during wash cycle eliminates trap-over and improves wash volume. Deluxe system includes Nema 4 enclosure with wash/manual switching assembly.. Optimizes energy efficiency & maximizes equipment ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
For ⅝" - ⅞" rubber, plastic & silicone hose. Replacement Strap - Part# 47491-1. Replacement Seal Diaphragm - Part# ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
The MP cooling tank series is available in 4 different capacities, covering a range from 15 Gallons to 90 Gallons. These tanks meet the needs of all home, small dairy and cheese production facilities. Fast and stable cooling and maximum energy efficiency are benefits when using any of our MP models. These tanks are fully compliant with all standards and regulations. All tanks run on standard 110V ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Applications: Schlueter Application Tanks are made to help you solve your needs with maximum efficiency - sized to fit your application with sanitary designs to eliminate tank as a collector of bacteria. In addition to the many styles and sizes illustrated, you will note the tank details built in to assure you of the best generous interior and tank edge radius for easy flush cleaning, heavy ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Application: Safgard CIP systems can be portable or stationary, single tank, 2 tank, or multi-tank systems. CIP systems designed and fabricated to ensure efficient automatic cleaning for each customer application. A good CIP system is designed for a minimum cycle time, lowering chemical usage, and reducing water and utility expenses. They can be designed for single use, reuse, or multiple ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
CIP Washing Equipment Aids: Sanitary Air Vent, CIP Return Air Vent, Rotary Filler Valve Wash Ring, Water Hose Valve, Hose ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Engineered Advantage: All liquid contact surfaces are type 304 Stainless Steel (Type 316 Available) Standard Industrial models have clamp-type fittings (100 psi) and include a "T" Strainer on the inlet to prevent large parts from damaging the UV ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Features: Milk Yield, Milk flow rate, Milk and Water temperature, Milking time, Electrical Conductivity - Mastitis ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Large nipple spread for wide-uddered cows. Automatic vacuum ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
System Includes: (1) 18" × 18" stainless steel receiver with 1½" ferruled milk outlet, (1) 3" ferruled trap outlet, (2) 3" ferruled milk inlets, lid and gasket, (1) 3"stainless steel “U” bend, (1) 3" × 3" 12 quart stainless steel trap, 18" receiver frame with adjustable legs, liquid level control, ¾ HP milk pump assembly with horizontal discharge. Drain valve ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Custom receiver packages can be assembled individually by choosing the best components for your specific application. Choose appropriate receiver size, match it with the best milk pump/control & filter assembly, then choose the proper moisture trap for custom installation. Vertical wash vats are also available and sized for the ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Quick recovery feature means these pumps are great for variable speed installations. A dependable lower cost alternative to the Lobe- Aire systems, Tuthill vacuum pumps are American ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Benefits: Improved product recovery. Improved liquid recovery/reuse. Cleanup process effluent. Remove solids, sludges and surface debris. Reduce solids, BOD and FOG. Improve process operation/performance. Reduce sewerage requirements and surcharges. Increased production ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Continuous processing. Energy efficient regeneratioin plate section. Skid mounted for easy installation. Best price for 400 Gal/HR and ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Meets US sanitary standards. 3-A and PMO compliant units available for human consumption. All stainless steel mounting construction. Processor controlled pasteurizing with recorder/controller. Can pasteurize liquids other than milk. Extra cooler section available for bottling cold ...
Manufactured by:The Schlueter Company based inJanesville, WISCONSIN (USA)
Parts Include: White diaphragm, large seal (2) required, red silicone seal, rubber plug, and small thin black “O”ring. ...