- Home
- Equipment
Refine by
Sci Xprt Equipment & Supplies
27 equipment items found
Manufactured by:Sputtering Components, Inc. (SCI) based inOwatonna, MINNESOTA (USA)
The MM is our mid-size external-mount end block. It uses the same patented technology as our internal end blocks to deliver outstanding value, performance and reliability but has a wider substrate coverage and a customizable drive shaft ...
Manufactured by:Sputtering Components, Inc. (SCI) based inOwatonna, MINNESOTA (USA)
The SMS is our largest external-mount Swing Cathode. The magnet pack swings in a programmable rotary axis that is independent of the rotating target tube, making it an ideal system for display or 3D part coating. Uniformity of < ±1% can be achieved on a static substrate (compared to > ± 15% on static substrates when not using swing). Other uses for Swing Cathodes™ are to ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
The peristaltic pump conveys liquids through the peristalsis of the rubber hose by the rotating rollers. The liquids only flow in the rubber hose and have no contact with other parts of the pump, leaving no dead corners in cleaning, avoiding possible contamination. The hose material applies carefully selected non-toxic silicone rubber or PVC which is in line with biochemical and health standards. ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
The peristaltic pump conveys liquids through the peristalsis of the rubber hose by the rotating rollers. The liquids only flow in the rubber hose and have no contact with other parts of the pump, leaving no dead corners in cleaning, avoiding possible contamination. The hose material applies carefully selected non-toxic silicone rubber or PVC which is in line with biochemical and health standards. ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
Mainly used in separation of solid-liquid-liquid, i.e. to separate simultaneously the solid (heaviest) and the liquid of two different ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
The system is used for rapid sludge reduction?construction sludge reduction project and tailing slurry dry discharge and dry heap process. It has advantages of high efficiency?good dewatering effect and small ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
Lithium iron phosphate battery cell;Cycle life > 8000 times;Can be widely used in power generation side, grid side, user side, backup power and new energy automobile ...
Manufactured by:SCI CORPORATION CO., LTD. based inSamutsakorn, THAILAND
Butterfly valves provide a unique combination of simplicity, durability and reliability. They are low cost, easy to install, ideally suited for open/shut services. It is also suitable for throttling service. The application cover a various range of liquids and gases, including water, natural gas, oils (animal , vegetable and mineral) , dilute acid etc. ...
Manufactured by:SCI CORPORATION CO., LTD. based inSamutsakorn, THAILAND
SCI AIR VALVES have been especially designed to allow the most efficient method of releasing or admitting air during the filling and emptying pipelines or vessels and the release of air accumulating in pipeline during normal working conditions. ...
Manufactured by:SCI CORPORATION CO., LTD. based inSamutsakorn, THAILAND
Knife Gate Valves are manufactured and tested in accordance with MSS-SP-81 class 125 / 150. The knife gate valves are bonnetless, available for both non-rising and rising stem design, with cast solid body, follower and yoke. Metal seated and resilient seated knife gate valve are available. Valves are resilient seating (com- pression sealing) with the wire reinforced rubber seat which located ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
The 3.6/4MW series are offshore wind turbines designed by Shanghai Electric. The company has complete independent intellectual property rights. ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
Mobile integrated dewatering system, achieving sludge dewatering operation with ultra-large ...
Manufactured by:JH Acquisitions, LLC DBA EN-SCI based inWestminster, COLORADO (USA)
This lightweight, compact and inexpensive balloon-borne instrument is the tool used around the world for measuring atmospheric ...
by:AtomTrace a.s. based inBrno, CZECH REPUBLIC
Sci-Trace is a configurable LIBS setup designed to provide to the researchers maximum possibilities for their LIBS experiments. Sci-Trace consists of an instrumentation cabinet and the LIBS Interaction Chamber mounted on an optical ...
Manufactured by:Sputtering Components, Inc. (SCI) based inOwatonna, MINNESOTA (USA)
With a more compact design than the SC and a lower power rating, the MC is designed for smaller ...
Manufactured by:Sputtering Components, Inc. (SCI) based inOwatonna, MINNESOTA (USA)
The glass industry-standard with thousands in operation around the globe, the SC-Series internal-mount end block is the best value, highest powered and most reliable end block available on the market ...
Manufactured by:Sputtering Components, Inc. (SCI) based inOwatonna, MINNESOTA (USA)
Our largest external-mount end block, the SM can accommodate targets up to 4000 mm (supported) and has a power rating of up to 200 kW DC or 80 kHz MFAC. It uses the same patented technology as our internal end blocks to deliver outstanding value, performance and reliability but has a wider substrate coverage and customizable drive shaft ...
Manufactured by:SCI CORPORATION CO., LTD. based inSamutsakorn, THAILAND
Gate Valve Non Rising Stem are manufactured and tested in accordance with BS 5150 PN10/16/25, BS EN 1171:2002, BS EN 1074-2, TIS 432 PN 6 / 10 / 16 and also meet the requirements of MSS-SP-70 class 125 / 250, Suitable for all types of water, air and ...
Manufactured by:SCI CORPORATION CO., LTD. based inSamutsakorn, THAILAND
Swing Check Valve are manufactured and tested in accodance with BS 5153 PN 10/16/25, BS EN 12334, TIS.383 PN 6/10/16,MSS-SP 71 class 125/250 and also meet the requirements of AWWA C 508, generally recommended to prevent backflow with minimum resistance tor flow, because of full water way design. Suitable for all types of water ,air and ...
Manufactured by:Shanghai Centrifuge Institute Co., Ltd (SCI) based inBaoshan District, CHINA
Complete dewatering and drying by inputting the sludge of 99%-95% moisture content through centridry system, this achieves maximum sludge reduction. The moisture content of dry sludge can be lowered to 8%-40% (could be adjusted as per client's ...