- Home
- Equipment
Refine by
Scott Xprt Equipment & Supplies
34 equipment items found
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
The Scott Hydro Turbine is rated at 1500 watts output. For comparison, a non-electrically heated home in the USA consumes on average about 1000 watts continuously….well within the potential of a single Scott Turbine. ...
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
Turbine with charge controller for battery charging – Inverter not included – Option #2. This is the basic control package for charging 12, 24, of 48 volt batteries in an off-grid power system. This includes the hydro-turbine Morning Star 600 volt charge controller, disconnects, 3 phase rectifier, over current protection and dump load control/resistor for heating water or heat. ...
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
The complete off grid – Includes Inverter -Option #3. Option #2 plus a Magnum 4000 watt Sinewave Inverter/Charger, and disconnect. This option provides conventional 120/240 VAC from batteries and charges batteries from a generator if required. Prewired and mounted on a 19″ x 34″ ...
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
This is the basic package for Grid-Tie applications where utility power is present and provides power outages circuit when needed. This system will handle power from a second hydro turbine for expansion. Includes one hydro turbine, SMA 3000 watt grid-tie inverter, disconnects, 3 phase rectifier, over current ...
Manufactured by:Scott Aerator Co. LLC based inHolland, MICHIGAN (USA)
Ice build-up during the winter can cause numerous problems around boats, dock pilings, boat houses as well as fish and wildlife ponds. The Scott Aerator Company, with over 40 years of experience, has developed a superior No-Icer that is efficient, reliable and extremely durable in keeping surface areas free of damaging ice. A Scott No-Icer keeps ice from forming by bringing warmer water from the ...
Manufactured by:Scott Aerator Co. LLC based inHolland, MICHIGAN (USA)
plse update Our Solar Powered DA-20 Display Aerator makes beautiful fountains exceptionally eco-friendly. The new Solar Powered DA-20 Display Aerator combines clean, eco-friendly aeration with the focal point of a fountain: a spectacular solution for remote spots where running electric power wouldn't be feasible or ...
Manufactured by:Scott Equipment Company based inNew Prague, MINNESOTA (USA)
Increase your production efficiency with surge hoppers from Scott Equipment, specially designed for use with heavy-duty horizontal mixers. With over 50 years of experience as process equipment innovators, Scott Equipment’s horizontal mixer and surge hopper combination can help you cut down batch cycle times and optimize your cleanout process for quicker and more effective production runs. ...
Manufactured by:Scott Equipment Company based inNew Prague, MINNESOTA (USA)
Scott Equipment’s Scale Hopper – a custom-designed scale hopper for horizontal mixers that helps in controlling production. Scott Equipment has been an innovator in the process equipment business since 1966, providing versatile batch blending and mixing equipment that various process industries rely on. With our Horizontal Mixer, Surge Hopper, and Scale Hopper combination, you can ...
Manufactured by:Scott-Clark Medical based inBurnet, TEXAS (USA)
Healthcare organizations employing Electronic Medical Record applications often look for the simplest and easiest point-of-care cart technology. Scott-Clark Medical has more than two decades of experience engineering mobile carts and working with clinicians from hospitals across the country to make patient care a priority. Our range of point of care mobile carts provides clinicians with a ...
Manufactured by:Scott-Clark Medical based inBurnet, TEXAS (USA)
Flexible Mobile Cart Power Technology provides alternatives to the frequent problems brought on by older cart battery designs. Nurses have a hard enough time with the exacting requirements of their daily rounds. Even though the mobile workstations that have already are helpful, they bring technical problems. Problems that can usually be traced back to the on-board ...
Manufactured by:Scott Aerator Co. LLC based inHolland, MICHIGAN (USA)
Ice build-up during the winter can cause numerous problems around boats, dock pilings, boat houses as well as fish and wildlife ponds. The Scott Aerator Company with over 40 years of experience, has developed a superior No-Icer that is efficient, reliable and extremely durable in keeping surface areas free of damaging ice. A Scott No-Icer keeps ice from forming by bringing warmer water from the ...
Manufactured by:Scott Aerator Co. LLC based inHolland, MICHIGAN (USA)
With the right tools, you'll be able to: Keep your lake bottom weed free and harvest your cut weeds. Keep your beach front free of weeds and debris. Remove decaying organic matter from your lake and pond bottom. Clean your beach sand, root up weeds and remove muck. Pull weeds in from 45 feet away. Collect large mats of floating ...
Manufactured by:Scott Equipment Company based inNew Prague, MINNESOTA (USA)
Scott Equipment’s Industrial Paddle and Ribbon Agitators for Batch Mixers. Choosing the right agitator for your application is essential to ensure proper mixing. Scott Equipment offers six different agitator designs to meet your custom mixing requirements. Additionally, you can test our agitators with your products in our Testing Lab before purchasing your batch mixer, ensuring you get ...
Manufactured by:Scott Equipment Company based inNew Prague, MINNESOTA (USA)
Explore Scott Equipment’s Industrial Batch Mixers, designed to provide accurate mixing of all kinds of products, from fine powdered materials to coarse ground ingredients. They are durably constructed in either mild or stainless steel. Our engineering department is always on the cutting edge of design technology, providing innovative and time-proven solutions to mix many products. Our ...
Manufactured by:Scott Equipment Company based inNew Prague, MINNESOTA (USA)
Scott Equipment’s modular bulk storage bins offer high-quality storage, modern design, and custom metalwork for efficient bulk material handling. These bins are engineered to meet the current requirements of constructing and operating bulk material storage systems. ...
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
(New) Stainless steel wedge wire self cleaning water intake screen (24″ x 36″) (container and fitting not ...
Manufactured by:Scott Hydroelectric based inRepublic, WASHINGTON (USA)
Unlike most water turbines which have axial or radial flows, in a cross-flow turbine, water passes through the turbine transversely or across the turbine blades. As with a water wheel, the water is admitted at the turbine’s edge. After passing the runner, it leaves on the opposite side. Going through the runner twice provides additional efficiency. When the water leaves the runner, it also ...
Manufactured by:Scott-Clark Medical based inBurnet, TEXAS (USA)
Your staff members are the core of your hospital or clinic’s operations. Without the right equipment to get the job done, they might not be as efficient or accurate as they could be. They might even suffer repetitive motion injuries or excessive fatigue from using outdated equipment that doesn’t move around ...
Manufactured by:Scott-Clark Medical based inBurnet, TEXAS (USA)
Sometimes the “Standard” product just won’t work. Too few or too small drawers, too much or too little weight, too little power or too small a display screen. In those cases, give us a call and we can probably adapt one of our base products to fit your need or fabricate from scratch if not. In each case, the result will be a mobile medical cart that meets your specific ...
Manufactured by:Scott-Clark Medical based inBurnet, TEXAS (USA)
Hot-Swap battery refers to a battery product that can be safely removed and inserted into a product like a computer cart without shutting down the cart’s computer. This useful feature can allow a mobile cart to provide uninterrupted service rather than having to stop for a battery recharge. Usually, at least two mounting positions are provided, so that one battery can continue providing ...