- Home
- Equipment
Refine by
Singer Xprt Equipment & Supplies
105 equipment items found
Manufactured by:Singer-Instruments and Control Ltd. based inTirat Carmel, ISRAEL
SM Series LVDT have the smallest Dia. of 2.3mm [0.09"]. This micro-miniature LVDT is designed for high resolution position measurement in tight places. It is layer wound on metal coil-form provides excellent stability, while ferromagnetic housing takes care of the electromagnetic and electrostatic shielding. Several options are available for signal conditioning: digital or analog EL-35 signal ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X107 position indicator stem is designed to provide direct indication of the diaphragm / inner valve position. The indicator stem moves up and down within its protective hexagonal brass housing. Within the housing is clear Pyrex sight glass, which allows viewing from both sides. Singer main control valves are designed with a separate stem cap that makes installation of the X107 safe and ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Oxy-Nitride stem is ideally suited to reclaimed water applications and a wide range of other applications where mineral-build up is a concern. When minerals build-up on stems, it can cause potential maintenance problems and operational malfunctions. The Oxy-Nitride treated stainless steel stem is the perfect solution. Its specialized proprietary aerated salt bath treatment will reduce or ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 160-RF pilot is a spring and diaphragm operated pilot designed to sense a differential across an external orifice plate. It is a normally open pilot that also has a sensing port is in the spring casing, above the diaphragm and is available in stainless steel. The inner valve is held open by the spring and when the control pressure below the diaphragm exceeds the combined forces ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is discharged to the lower pressure, downstream side of ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-D and 206-RPS-D pressure differential sustaining valves are based on the 106-PG or 06-PG main valve. The RPS-D uses the 81-RPD pilot valve and has two sensing connections. The valve and pilot remain closed until the difference between the two pressures exceeds the pilot setting. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain water control. Further adapt the valve to provide control for a wide range of functions with Singer ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 2 and 206-A-Type 2 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X129 limit switch is actuated by the opening and closing of a main valve. The assembly is fully adjustable over the entire valve stroke. Layout variations allow up to four separate switches to be mounted and actuated off the same ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 81-RP is a remote sensing, high capacity, spring and diaphragm operated, normally closed pilot. The inner valve is held closed by the spring. When the sensed pressure increases above the spring setting, the pilot opens. Model 81-RP pilot is used as the standard pressure relief/sustaining pilot on all 106 and 206 series valves. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 26 flow stabilizer is a self-cleaning, opening speed control. It is used in conjunction with a fixed restriction orifice that is usually threaded into port 3. The 26 stabilizer allows free flow down to the bonnet (port 1) and restricts flow up from port 1. The 26 stabilizer is used as the standard flow stabilizer (opening speed control) on model 106-PR or 206-PR pressure ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The fixed restriction is a 303 stainless steel bodied fitting with a stainless steel orifice plug. The fixed restriction controls the flow rate in the pilot system. The orifices are sized to provide the proper control to a select series of valve sizes only. This all stainless steel version replaces all previous versions of the brass body, with stainless steel insert. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-EF-8837BX and 206-EF-8837BX excess flow valves are based on the 106-PT and 206-PT Double Chamber main valves. The valve is designed to shut-off tightly when flow exceeds a predetermined amount. The 625-RPD pilot senses the pressure drop of the valve and closes the valve when the tripping flow is reached. Typical pressure drop at tripping is 5 psi / 0.35 ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
An altitude pilot valve that is spring and diaphragm operated; it controls the water level in a reservoir by sensing the hydrostatic head. When the hydrostatic head equals the spring force, the pilot connects port “X” (connection to main valve inlet ) to port “K” (connection to main valve bonnet). The main valve closes. When the hydrostatic pressure decreases slightly, the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The MCP-TP Series is a multiple process loop control panel designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. Range of application is dependent on the feedback (process variables) transmitters used, which is similar to (but not limited to) combination automatic control valve functions with conventional ...