- Home
- Equipment
Refine by
Skyline Xprt Equipment & Supplies
24 equipment items found
by:Skyline Drones based inTimi?oara, ROMANIA
Drone-based gas detection technology integrates advanced sensors onto unmanned aerial systems to enable both remote and rapid assessment of gas concentrations across expansive areas, including challenging indoor environments. By utilizing drones equipped with specialized gas sensors, operators can efficiently navigate and monitor potential emission sources such as pipelines, refineries, and ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Z-shaped sheet piles are called Zs because the single piles are shaped roughly like a horizontally stretched Z. The interlocks are located as far away from the neutral axis as possible to ensure good shear transmission and increase the strength-to-weight ratio. Z piles are the most common type of sheet pile in North America and can be used in a wide variety of applications. Retaining walls, ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Over the past 50 years, fully threaded, high strength threaded bar and multi-strand anchor systems with corrosion protection have developed into the most accepted and highly reliable ground anchorages available. As the leading steel supplier in the United States’ foundation industry, Nucor Skyline manufactures the most extensive selection of cold rolled and hot rolled, high strength, fully ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Bearing piles are required when a structure cannot be founded on a shallow foundation. Tall structures, for example, often require deep foundations based on engineering principles. In other cases, the soils near the surface may not have the strength to support the structure. Thus, a deep foundation system must be designed to transfer the foundation loads down through the steel piles to carry the ...
Manufactured by:Environmental Solutions Worldwide (ESW) based inMontgomeryville, PENNSYLVANIA (USA)
The Skyline is specifically designed to provide cost-effective diesel particulate (PM) reductions for in-use diesel engines operating in off-road equipment and duty cycles including cold exhaust and older ...
Manufactured by:Skyline Industrial Group, Inc. based inThousand Oaks, CALIFORNIA (USA)
This 3 Ton Air Cooled Process Chiller is designed for industrial applications requiring efficient cooling with a capacity of 36,000 BTU/hr. The unit operates with a cooling range from 42°F to 77°F (5°C to 25°C) and features a stainless steel reservoir holding up to 15 gallons of water. Designed for quiet operation, it is suitable for indoor use and comes with a Copeland Scroll ...
Manufactured by:Skyline Industrial Group, Inc. based inThousand Oaks, CALIFORNIA (USA)
15 Ton Air Cooled Process Chiller; Model: SAC-15. Cooling capacity: 15 ton. BTU/hr: 180000. Cooling range: 42 °F to 77°F or 5°C to 25°C. Reservoir Capacity: 60 gallons. Water pump GPM: ...
Manufactured by:Skyline Industrial Group, Inc. based inThousand Oaks, CALIFORNIA (USA)
The Honeycomb Desiccant Dehumidifier/Dryer series, including models SHDD-30, SHDD-50, and SHDD-80, are designed to efficiently manage humidity levels in various industrial applications. These units utilize advanced desiccant technology, featuring a honeycomb rotor design that enhances moisture absorption and ensures consistent dehumidification performance. The SHDD-30 is ideal for smaller spaces, ...
Manufactured by:Skyline Industrial Group, Inc. based inThousand Oaks, CALIFORNIA (USA)
The Hot Air Hopper Dryer model SHD-12 is designed for efficient drying of plastics in industrial settings. It utilizes hot air circulation to reduce moisture content in plastic resins, enhancing the quality of final products. The dryer is suitable for use with different types of plastics and can handle varying batch sizes, making it versatile for various manufacturing needs. The SHD-12 model's ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Nucor Skyline has vast experience in manufacturing pipe piling products for the North American steel foundation industry. With our strategically located manufacturing plants, we can service the needs of any public or private project throughout the ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Nucor Skyline has vast experience in manufacturing pipe piling products for the North American steel foundation industry. With our strategically located manufacturing plants, we can service the needs of any public or private project throughout the ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
The Pipe-Z System is composed of large diameter pipe, C 9 connectors, and AZ intermediary piles. The AZ sheets transfer pressure to the pipe which carries most of the load. The pipe is available in many sizes and on large projects can be specifically ordered to fit the exact needs of the ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Nucor Skyline is a proven leader in North America’s structural and foundationindustries as a supplier of wide flange products for various applications. Through its extensive network of manufacturing and fabrication capabilities, we are able to provide wide flange material for any project, public or ...
Manufactured by:Levenhuk USA based inTampa, FLORIDA (USA)
Levenhuk Skyline BASE 50T Telescope is a "junior" model in Levenhuk Skyline BASE product line designed for beginner astronomers. This refractor is ideal for the first astronomy observations: it features easy assembly, main accessories are already included in the kit, and moreover, even a kid can operate this telescope. You can observe terrestrial objects, the Moon and planets of the Solar System ...
by:Skyline Drones based inTimi?oara, ROMANIA
Multispectral imaging is a sophisticated remote sensing technique that captures data across multiple wavelengths beyond the visible spectrum. Its integration with drones allows for high-resolution spatial analysis over expansive areas, offering crucial insights into environmental variables. In precision agriculture, these drones assess crop health, nutrient levels, and water stress, facilitating ...
Manufactured by:AUWEKO GmbH based inNeu-Isenburg, GERMANY
Self-supporting, straight exterior walls incl. rounded corner profiles and a cover construction made of stainless steel, fastened with a galvanized interior construction, provide great stability. The funnel-shaped openings on the top of the container guide the waste into either a bag holder (version 1) or a galvanized inner liner, which also serves as a bag holder (version ...
by:Skyline Drones based inTimi?oara, ROMANIA
Ultrasonic Thickness Measurement (UTM) integrated with drones represents a non-destructive testing solution to evaluate the material thickness, primarily in industrial contexts involving metals. Utilizing ultrasonic waves, this technology determines thickness by analyzing the time taken for waves to travel through a material and return. This method is highly effective for inspecting large ...
by:Skyline Drones based inTimi?oara, ROMANIA
Thermal imaging technology, or thermography, captures and visualizes temperature distributions using infrared imaging. Through integration with drones, thermography offers rapid aerial thermal inspections of structures and environments, granting unprecedented access to various angles and elevations. This technology is pivotal in industries like renewable energy, where it aids in detecting ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
Nucor Skyline has vast experience in manufacturing pipe piling products for the North American steel foundation industry. With our strategically located manufacturing plants, we can service the needs of any public or private project throughout the ...
Manufactured by:Nucor Skyline Steel , LLC based inRock Hill, SOUTH CAROLINA (USA)
The HZ Combined Wall System was introduced by Arbed in 1972. As with all of their sheet pile sections, Arbed, Arcelor/ArcelorMittal continued to develop the best product possible and in the late 2000s came up with the current system. A connector is threaded at the end of the flange of the HZM king pile. The intermediary AZ piles are then threaded onto the connectors between two HZM piles. ...