- Home
- Equipment
Refine by
Sps Xprt Equipment & Supplies
109 equipment items found
Manufactured by:SP Medikal San Ltd Sti based inIstanbul, TURKEY
The Sterintech™ Batch Control Helix Test with PTFE Helix with a 1,5 mtr long tube can be used to test the performance of the steam sterilizer during each cycle. In general Helix devices and their indicators have proven that they can detect failures during each cycle much earlier and better than other chemical indicators / biological indicators. Also failures which are not detected by other ...
Manufactured by:Storage Project Solutions S.L. (SPS) based inMálaga, SPAIN
Flat bottom silos are the best solution in the case of long term grain storage. They are suitable for capacities of over 2000 tons and extreme maintenance conditions. PRADO SPS offers a wide range of flat bottom silos, based on our standard diameters, with the desired height. We also offer the complementary accessories so that the grain is stored and treated in the best possible way. We can also ...
Manufactured by:SPS Engineering, Inc. based inNorth Salt Lake, UTAH (USA)
The drive unit is the mechanical core of clarifier or thickener that produces low speed high torque rotation of the sludge collector arms to permit positive sludge collection and removal for proper unit operation. SPS designs, manufactures, assembles and tests the drive units for our equipment and also offers replacement drive units for aging clarifiers. SPS drive units are reliable, heavy duty, ...
Manufactured by:SPS Engineering, Inc. based inNorth Salt Lake, UTAH (USA)
Grit collectors and classifiers are utilized for removal of sands and grit from wastewater to protect against abrasive wear on mechanical equipment and sludge pumps. Separated grit is dewatered and washed on a grit classifier cyclone separator then discharged into bin for disposal. SPS manufactures classifiers and collectors for use in grit ...
Manufactured by:SPS Engineering, Inc. based inNorth Salt Lake, UTAH (USA)
Tank (concrete or steel), Side Feed Influent pipe type SCBC / SCCC, Center Column Influent type SCCC, Feedwell, Sludge Collection Rake Arm, Angled Blade, Sludge Withdrawal, Center Hopper, Torque Shaft or Torque Cage, Drive Unit, Drive Access Bridge/ Walkway, ...
Manufactured by:Switchgear Power Systems LLC based inWinneconne, WISCONSIN (USA)
The Switchgear Power Systems Power Distribution Centers are custom engineered, environmentally controlled, pre-fabricated enclosure built to house electrical equipment. Each PDC is designed to meet the specific needs of a project. SPS Power Distribution Centers set the standard for flexibility, reliability and performance. ...
Manufactured by:Switchgear Power Systems LLC based inWinneconne, WISCONSIN (USA)
When circuit breakers are not needed or desired, our cost-effective, ANSI class metal-enclosed switchgear with load interrupter is a viable option for your power distribution system ...
Manufactured by:Switchgear Power Systems LLC based inWinneconne, WISCONSIN (USA)
Switchgear Power Systems metal-clad switchgear is available from 5kV-38kV in outdoor non-walk-in, indoor, and PDC enclosures. ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
Provides 500 watts of power; One of the most popular ratings; Adequately services a wide variety of power needs; Available with CSA ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
Provides 1000 watts and 1500 watts respectively; Feed multiple loads using one power generator to reduce operating costs; The RP1000 can be modified in the field to achieve a 1500 watt rating by switching out the Fuel Cell Bundle; Available with CSA ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
The Field Stand is designed to elevate the power generator 25 inches (64cm) off the ground. This prevents the unit from resting in puddles, snow or mud. It allows air flow around the unit and physical access at waist level. The stand is painted steel and ships unassembled. For the 500 watt unit order p/n ARP500-FS. For the 1000 watt and 1500 watt unit order p/n ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
The exhaust vent is located on the lower right hand corner of the power generator. When deployed outside, the unit’s exhaust is typically discharged directly from the enclosure into the atmosphere. In certain installations (inside an equipment shelter or wherever excessive snow could build up and block the exhaust vent) the exhaust may have to be directly ducted to a specific area. This ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
This kit is externally mounted to the power generator. It includes a pressure regulator that can take a maximum of 125 psi and reduce it to the specified inlet pressure of 2 to 5 psi. Pressures over 125 psi must by depressurized before feeding the pressure regulator. Also included in this kit is a coalescing canister and filter that will capture any liquids in the incoming gas which could cause ...
Manufactured by:SP Warminster (PA) based inWarminster, PENNSYLVANIA (USA)
Engineered for flexible loading and energy efficient operation, the SP Hotpack Undercounter Glassware Washers are a cost-effective option for any lab - no matter the requirements. Featuring upper and lower open racks that can accommodate specialty baskets for a wide variety of glassware shapes and sizes - rest assured that there’s no glassware too big or too small. And cleaning those ...
Manufactured by:SP Warminster (PA) based inWarminster, PENNSYLVANIA (USA)
Finding a glassware washer that can meet the demands of your laboratory while taking up minimal space can be a time-consuming task. SP Hotpack Vertical SpaceSaver Glassware Washers are designed for peak performance - with extensive capacity and unrivalled flexibility. Offering single- and double-washing chamber models and up to four loading levels in two independently microprocessor-controlled ...
Manufactured by:SP Warminster (PA) based inWarminster, PENNSYLVANIA (USA)
Our SP Hull LyoConstellation™ S10, S20 and S30 Development and Pilot Lyophilizers build on SP’s reputation as a pioneer of freeze-drying technologies. Designed to GMP standards and ready for full line integration, the LyoConstellation fits in where others cannot. And if time is not on your side, rest assured that our lyophilizers are configured to order - for faster than average ...
Manufactured by:SP Warminster (PA) based inWarminster, PENNSYLVANIA (USA)
Our SP Hull LyoConstellation™ S10, S20 and S30 Development and Pilot Lyophilizers build on SP’s reputation as a pioneer of freeze-drying technologies. Designed to GMP standards and ready for full line integration, the LyoConstellation fits in where others cannot. And if time is not on your side, rest assured that our lyophilizers are configured to order - for faster than average ...
Manufactured by:POLANES Ltd. based inBydgoszcz, POLAND
The Farma Life module, by analysing the animal activity, helps to detect the heat and indicated the perfect time to carry out insemination. The user may choose either pedometer on a leg or a collar on a neck. The data is sent to the computer, through the reader and it is processed by the Infodex PC program. The functions are the following: activity measurement, detection of heat suspicions, ...
Manufactured by:SP Maskiner AB based inLjungby, SWEDEN
The SP 761 LF is a compact, heavy duty and high performance harvester head. It is designed according to SP´s Low Friction principle for minimum friction and maximum productivity. The SP 761 LF is suited for working on both large wheel based harvesters as well as tracked harvesters and excavator ...
Manufactured by:SP Maskiner AB based inLjungby, SWEDEN
The SP 591 LX G4 is purpose built for harvesting and debarking of the most difficult species of plantation grown eucalyptus and acacia. It is an extremely strong and tough harvester head, designed according to the LX principle for maximum reliability and productivity even under the toughest ...