- Home
- Equipment
Refine by
Stc Xprt Equipment & Supplies
42 equipment items found
Manufactured by:S.T.C S.r.l. based inPedrengo (BG), ITALY
The vane pack separator allows to have a high efficiency in the separation of liquid particles inside a gas stream. Depending on customers’ needs, the materials used for the realization can be different: carbon steel, stainless steel and special austenitic ferritic steels such as Duplex, Super Duplex, Nickel alloys and Titanium Gr. 2, considering also the conditions in which the filters ...
Manufactured by:Southern Technologies Corporation based inChattanooga, TENNESSEE (USA)
The KPPA-900-120-11.5 horizontal polarized antenna has been constructed with heavy duty aluminum extrusion and covered with a UV resistant ABS radome. Because of its high gain it offers superior extended range. The 120 degree beamwidth covers a large service area. The heavy duty mounting system will ensure a stable installation in high wind conditions. The mount has a tilt indicator to enable ...
Manufactured by:Soil Technologies Corporation based inFairfield, IOWA (USA)
Stubble Digest is a natural product for the accelerated decomposition of crop residues and organic debris in farm fields or, for organic waste in agricultural processing sites. Stubble Digest liquid is a combination of naturally occurring bacteria strains, plant enzymes, buffers and surfactants. Apply at the rate of one (1) gallon per four (4) acres, (2.50 liters per Ha.) on soils with a pH ...
Manufactured by:Soil Technologies Corporation based inFairfield, IOWA (USA)
Lagoon Kleen, an all-natural product, is a concentration of special enzymes and natural bacteria cultures that help manage unwanted solids in agricultural waste handling systems. The specific cultures have been selected for the rapid and efficient biotreatment of all liquid organic waste in lagoons or other storage ...
Manufactured by:Soil Technologies Corporation based inFairfield, IOWA (USA)
ABLAZE is a non-selective, contact herbicide made from minimum risk ingredients that are safer for the environment and for workers. When you spray ABLAZE on weeds and grasses, it binds to the surface of the leaf and begins to destroy the cell structure through a burn down process. After ABLAZE is applied, the plant begins to stress, and results can be seen in as little as 24-48 ...
Manufactured by:Southland Trailer Corp (STC) based inLethbridge, ALBERTA (CANADA)
18’ Working Deck, 8’ 6” Overall Width, 81” Between Fenders, Plank Deck, Steel Fold Up Ramps, Spare Tire Carrier, Welded Fenders, Stake Pockets & Rub Rails, Front Rail, Breakaway Kit, Protected Wiring, LED Lighting Package, Fully Enclosed Wiring, Bolt-on Safety chains & Hooks, Lippert Brand Axles, Radial 10 Ply Tires, Steel Components cleaned with Steel Shot Blast, ...
Manufactured by:Southern Technologies Corporation based inChattanooga, TENNESSEE (USA)
The MRDI is a panel mounted accessory for the 2600 Series AEI system. It is used in industry track or yard applications to enable the 2600 AEI Reader to provide route tracking information for vehicles that are moved to or from multiple available tracks, as determined by an adjacent track switch or ...
Manufactured by:Southern Technologies Corporation based inChattanooga, TENNESSEE (USA)
The Model 2600-020 AEI Reader is a dual microprocessor system specially designed for the demanding environment of the rail industry. The 2600-020 is the future of AEI integration and was developed to interface with the latest Transcore Multiprotocol Rail Reader ...
Manufactured by:Southern Technologies Corporation based inChattanooga, TENNESSEE (USA)
The iCUBE is an extremely versatile solution for wayside condition monitoring and reporting applications. With expanded networking capabilities, the software configurable iCUBE excels in broadcasting alarms from a large selection of detectors to prevent railway incidents with features that ...
Manufactured by:Southern Technologies Corporation based inChattanooga, TENNESSEE (USA)
The Model 2300 NG Defect Detector is a dual microprocessor system designed to perform all traditional defect ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
We are a Manufacturer of Spline Hobs, in Standard and specific customer requirements. These Hobs are widely used in automobile industries. Our Spline Hobs are made from premium grade imported raw material as we don’t compromise the quality. STC Spline Hobs have specially curved tooth forms that are made in single and multiple thread types. We are always ready to make products as per special ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
STC is a Manufacturer of Gear Hobs made with maximum accuracy and proper finishing. These Gear Hobs can be manufactured in Bore and Shank Types. Besides Gear Hobs, we also supply custom gear Hobs as per customer drawings. These are used to generate gear tooth profiles in any material. Gear Hob Cutters are available in all kinds of PVD coatings as per our customers’ requirements. The Hobs ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
STC Chain Sprocket Hobs are specially designed to produce accurate finishes on several tooth forms. We can also manufacture Chain Sprocket Hobs as per customer requirements or drawings. Chain Sprocket Hobs are reachable in a wide variety of non-fixing and full-fixing in a single or multi-start. Our Chain Sprocket Hobs has a smooth finish, precise design, and high strength. Chain Sprocket Hobs are ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
STC Manufacture high-performance Solid Carbide Hobs, which can be used in a shell or shank design to cut gears with or without coolant. Solid Carbide material gives good production as well as cutting high hardness components. Each Grade has different compositions depending on its final application. ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
STC produces Carbide Shank Type Gear Hobs with high functional tool life. It can be supplied with all types of PVD Coating and other coatings available on customer requirement. Shank Type Gear Hobs are part of specific tools that match the worm shaft with a sharpening allowance. Lead angles up to 45° are also available. Depending upon strength constraints, these hobs can be hollow or integral ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
STC is a Manufacturer of Disc Type Gear Shaper Cutters designed to cut any gear, internal or external, spur or helical. They can also be used to cut splines, serrations, sprockets, or many other involute forms. But they may also be designed for externals if ...
Manufactured by:Super Tools Corporation (STC) based inPatiala, INDIA
Our Gear Shaving Cutters designed to meet the specific finishing requirement of work gears. Therefore, complete details are required to design and manufacture shaving cutters. All Shaving Cutters supplied with inspection and lead test charts. STC Manufactures Gear Shaving Cutters such as conventional, diagonal, underpass, and plunge cut with a wide range of sizes according to the customer's ...
Manufactured by:Southland Trailer Corp (STC) based inLethbridge, ALBERTA (CANADA)
16.5″ x 7″ 23k Extended Life Antilock Braking System, Bendix TABS-6 ABS (2 Sensors/1 Modulator), Bendix Auto Slack Adjusters, Spring Brake Pots 30/30 TSE, Cams ...
Manufactured by:Southland Trailer Corp (STC) based inLethbridge, ALBERTA (CANADA)
SL510-5K: 5'x 10', 5,000 lbs. Single Axle Dump Trailer. 10' box length, 5'box width, 8' overall width, 12 ga floor, low profile steel ramps, spare tire carrier, welded fenders, stake pockets & rub rails, ...
Manufactured by:Southland Trailer Corp (STC) based inLethbridge, ALBERTA (CANADA)
SL510-7K: 5’ x 10’, 7,000 lb., Tandem Axle Dump Trailer. 10’ box length, 5’ box width, 8’ overall width, 12 ga floor, 2,500 lb. low profile steel ramps, spare tire carrier, welded fenders, stake pockets & rub ...