- Home
- Equipment
Refine by
Vertek Xprt Equipment & Supplies
32 equipment items found
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek Light CPT trucks are designed to be an economical platform for obtaining CPT data. Because of the Light Truck's small size, it does not require special permits, licenses, or increased insurance costs. In most states and counties it can be licensed as a pickup truck. The combination of small size and light weight makes it easy to access tight spots while providing economical operation and ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Unsurpassed Strength - Vertek manufactures a full line of CPT push rods with our proprietary Speed Lock dual-lead thread design. Speed Lock Rods provide unsurpassed joint strength- up to 50% stronger than industry standard Vthreads. Our unique rope thread design uses less of the available wall thickness and balances the strength between the male and female thread ends. In fact, aSpeed Lock ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek manufactures a full line of all-terrain, self-propelled CPT rigs for difficult to access areas offering 15 to 30 tons of push force. Our CPT platforms provide ample work area in an enclosed or open-air design. Track Rigs can be tele-operated or controlled via the existing driving station. ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Rugged and Reliable Vertek’s Digital Cones provide simple, easy-to-use CPT measurements in a compact system. Since analog-to-digital conversion is preformed downhole, the bulkiness of cabling and uphole electronics are reduced, and noise problems associated with cable length and low voltage signals of analog systems are eliminated. Vertek’s 10 conductor cable with LEMO type connectors ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Rugged and Reliable - Vertek’s Digital Cones provide simple, easyto-use CPT measurements in a compact system. Since analog-to-digital conversion is preformed downhole, the bulkiness of cabling and uphole electronics are reduced, and noise problems associated with cable length and low voltage signals of analog systems are eliminated. Vertek’s 10 conductor cable with LEMO type ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Soil Moisture/ Resistivity – Soil moisture, or the volumetric percentage of water in soil, has become an important consideration in the design of environmental re mediation processes and agricultural planning, and it is one of the most fundamental factors influencing soil strength. VERTEK’s Soil Moisture/Resistivity (SMR) Module provides real-time, in-situ logs of soil moisture and ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Simultaneous In-line Sampling -The Vertek ConeSipper module attaches directly behind a standard CPT cone to obtain gas or water samples as the CPT probe is advanced, saving substantial money and time by eliminating duplicate soundings. Developed and patented by Westinghouse Savannah River Corporation (WSRC) and Applied Research Associates, Inc., the ConeSipper is manufactured by Vertek under an ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
The digital electronic 10 cm2 cone is designed to address the accuracy, sensitivity and durability problems inherent in other cone designs of the same or lower capacity. This cone provides excellent data for softer materials and provides excellent resolution in most materials. This cone has a 10 square centimeter tip. The cone consists of two strain guage transducers, with the cone electronics ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
The digital electronic 15cm2 cone is designed to address the accuracy, sensitivity and durability problems inherent in other cone designs of the same of lower capacity. The Cones consist of two strain gauge transducers, with the cone electronics packaged directly behind the transducers. The cone channels are temperature compensated to provide stable readings during testing. The cone tip, sleeve ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
The drill rig CPT adapter kit allows drilling service providers conducting site characterization activities to conduct Cone Penetrometer Testing (CPT) with existing drilling ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
An adaptable high-powered CPT system with a return on investment in less than 40 days. Vertek’s S4 Modular CPT System can quickly and seamlessly get you into the CPT market using common construction equipment for power and ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Our CPT Cone Systems offer reliable, accurate and reproducible data ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek offers two lines of “all-in-one” equipment that includes the necessary Data Acquisition System (DAS) and digital cone penetration testing (CPT) components. Our line of equipment has been strengthened to handle the various sedimentary deposits found across our ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
The Vertek ADCP’s speed, accuracy, and automation saves you time and money. Offered as a trailer-mounted system, the ADCP is a cost-effective solution for high production dynamic cone penetrometer ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
This specialized light duty cone is designed for shallow investigations typically associated with agricultural, education and laboratory controlled tests. The operator can achieve combined data collection inclusive of geotechnical properties and SMRT measurements in a single integrated probe. Communicates with a specialized data ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek’s CPT trucks can be designed to be mounted to the chassis of your choice, from a heavy-duty pick-up truck to a 6×6 chassis to reach offroad environments. We build our CPT trucks to maximize workspace and storage, optimize the user experience, and ergonomically organize tools, outlets, and cabinets for maximum ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek’s CPT track rig systems are ideal for high production, maneuverability, and sites requiring low ground ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek’s Universal Push system can be easily mounted on a wide range of platforms including barges, crawlers, trucks and trailers. The Universal Push System’s versatility enables access to push sites in rough or difficult terrain as well as making it easy to transport in urban work areas. The Universal Push System is built for heavy use and is equipped with easy to use lever controls ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Expand your testing capabilities by adding the soil sampler to any Vertek CPT ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
The 10 Ton Portable Cone Penetrometer (CPT) hydraulic load frame is the lightest, most portable hydraulic CPT unit available. The hydraulic power pack and the hydraulic cylinders are independent and coupled by hydraulic quick disconnects. The aluminum twin cylinders and power pack weigh only 195 kg (430 lbs) and 160 kg (355 lbs) respectively. They are designed so that the handle weight is less ...