Aquaporin DWRO - Model 1812-150 -Drinking Water Reverse Osmosis

• Revolutionary high water flow for efficient water treatment
• High rejection of harmful pollutants ensures safe and healthy drinking water
• Biomimetic product incorporating nature’s water channels

Maximum operating pressure 125 psi (8.6 bar)
Maximum operating temperature 45°C (113°F)
Maximim feed flow rate 2.0 gpm (450 L/h)
Maximum feed water SDI 5 (15 min)
Maximum feed water turbidity 1 NTU
Operating pH range 3-10
Cleaning pH range 2 - 11 (25°C)
Free chlorine tolerance < 0.1 ppm

• Permeate from the first hour of operation should be discarded. Do not use this initial permeate for drinking or food preparation
• To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative solution before use.
• Elements contained in the boxes must be kept dry at room temperature (7-32°C / 40-95°F) and should not be stored in direct sunlight.
• Keep elements moist at all times after initial wetting.
• Surface and color variations may occur on the flat sheet membrane but will not affect the performance.
• The presence of free chlorine and other oxidizing agents can cause premature membrane failure. Since oxidation damage is not covered under warranty, Aquaporin A/S recommends removing residual free chlorine by pretreatment prior to membrane exposure.
• The information provided in this document is for informative purposes only. It is the responsibility of the user to ensure appropriate usage of this product. Aquaporin A/S assumes no obligation, liability, or damages incurred for the misuse of the product or for the information provided in this document. This document does not express or implies any warranty as to the merchantability or fitness of the products.