Jimi-Tech - Model JMK-DT12 Series -Electric Linear Actuator

• The maximum thrust can reach 1200KG
• The maximum self-locking force can even reach 1500KG
• The telescopic inner tube is made of stainless steel, making it stronger
• The maximum speed can reach 60mm/s when loaded with 200KG. It can be equipped with a potentiometer or Hall output signal feedback
• The protection level can reach IP66, making it suitable for outdoor use. Motors with voltages of 48V / 36V / 24V / 12V are available, and a clutch system and overload protection function can be selected
• It can be applied to various industrial and agricultural vehicles, harsh environments, places with high load requirements, and maintenance-free applications

Overload clutch:
JIMI`s electric actuator employs a mechanical clutch with load limiting, which prevents motor stalling during actuator operation. When the load exceeds the rated value, the clutch kicks in to protect the motor from burning out and the mechanism from damage, thereby extending its service life.

Potentiometer feedback:
The potentiometer provides an analog output signal that can be used to determine the position of the telescopic tube. Upon power loss and subsequent re-energization, the potentiometer retains its previous position.

Standard product installation dimensions:
Stroke: 50~300mm       L =S+200mm     (The installation distance is uniformly set to 300mm for strokes below 100mm)
Stroke: 300~600mm     L =S+250mm
The installation hole direction on the drawing is at a right angle of 90 degrees (standard), and the standard hole diameter at the front and rear ends is Φ13