Envea - Model QAL 181-QAL1 -Forward Scatter Particulate CEM System
FromENVEA
QAL1 Approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes. 4 QAL1 certified ranges, including 0 – 7.5 mg/m3, the lowest achievable for any PM-CEM.
More about this product— External link
Most popular related searches
wet electrostatic precipitator
particulate continuous emissions monitor
electrostatic precipitator
electrostatic precipitation
dry flue gas
bag filter cartridge
wet electrostatic precipitation
cartridge filter
filter cartridge
CEMS
- QAL1 certification ranges: 0 – 7.5 mg/m3, 0 – 15 mg/m3, 0 – 100 mg/m3, 0 – 200 mg/m3
- Robust design with no critical moving parts
- Available for use in high-temperature stack conditions and Ex hazardous zones
- Easy to fit multi-patterned flange
- Adjustable monitoring depth to ensure sampling in the most representative part of the flow path
- Enhanced measurement due to reduced cross sensitivity to particle type and size
- ProScatter™ technology offers enhanced measurement due to reduced cross-sensitivity of particle type and size
- Easily audited with manual filters
- Stack Particulate monitoring after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
- Non-condensing / dry flue gases
Typical Applications:
- Incineration
- Metals (eg Steel/Aluminium)
- Minerals (eg Cement/Gypsum)
- Chemicals (eg TiO2 / Refinery)
- Power Generation Plant (eg Coal/Biomass)
- Measured parameters: Dust
- Technology: ProScatterTM Forward Scatter
- Measurement/Monitoring capability: 0-1000 mg/m³*
- Stack/Duct diameter suitability: up to 8m
- Flue gas temperature: up to 500°C
- Baghouse: YES
- Cartridge Filter: YES
- Ceramic Filter: YES
- Coalescent Filter: YES
- Cyclone: YES
- Electrostatic Precipitator (ESP): YES
- Wet Electrostatic Precipitator (WESP): /
- Wet Scrubber: /
- MCERTS & TÜV (UBA) to EN15267-3: YES
- QAL1 certified to EN14181: YES
- QAL3 to EN14181: YES
- GOST: YES
- ATEX: YES
- Sensor variants: Stainless Steel
- Hastelloy® corrosion resistant
- QA checks: YES
*Application dependant
Certified:
- MCERTs and TÜV (UBA) certified to EN15267-3 (incl. 0-7.5 mg/m3)
- QAL1 as defined by EN14181
- QAL3 compliance to EN14181
- EN13284
- GOST Approved, etc.
- Ex Zone 2