- Home
- Companies
- OdorFree, by SD International, Inc.
- Products
- OdorFree - Model Autel 1000 - Ozone ...
OdorFree - Model Autel 1000 -Ozone Generators
The Autel 1000 is designed for smaller spaces such as automobiles, hotel rooms and other spaces that can be treated in a short period of time. This model has variable ozone-output control and a 60-Minute Timer that turns off automatically when the treatment is completed. For deeply entrenched odors, there is also a “Hold” setting for an extended treatment until the machine is turned off manually.
The typical automobile or hotel room with light to moderate odors can normally be treated in 15-30 minutes. For larger spaces and longer treatment times, an Odor Free model with a 12-Hour Timer is more convenient.
A good selection for automobiles, trucks, rental cars, hotel and motel rooms, hospital rooms, small office rooms, cruise ship cabins and small boats. Treats odors such as cigarette smoke and pet odors. Click to learn about treating the odors in your location. Select Your Odor
- The larger the space, the longer the treatment time
- The heavier the odors, the longer the treatment time
- Odors normally migrate throughout the facility
- Treating the entire space including ductwork is most effective
Comes complete with plates and a filter. These are designed for long-term use and can easily be cleaned and reinstalled. Just plug in the unit, turn the dials to select time and output level. Then vacate the area while the odors are oxidized.
Warning: For use in unoccupied spaces only. Prolonged exposure to high ozone levels can cause eye and respiratory irritation. Anyone with respiratory issues should consult their physician before use.
Odor Free Autel 1000 Details
- Coverage Up to 1,000 Square Feet or 10,000 Cubic Feet
- Ozone Plates: 2
- Fan: 100 CFM
- Volts/Watts: 110/30
- Amps/Hertz: .35/60
- Output: 900 mg/hr
- Ozone Plates: 2
- Size: 7.5”h x 9”w x 12.5”d
- Weight: 9.5 lbs
Operating Instructions
- Close all outside doors and windows of the area to be treated.
- Make sure inside doors, such as bathroom and closet doors, are open.
- Set thermostat to maintain a moderate temperature in the facility to be treated. Fan may be turned to "On" to circulate ozone throughout the space.
- Make certain all occupants and pets have been removed.
- The Ozone Output dial is normally set at "Medium" to "High" depending on the level of odors and amount of time for treatment.
- Set Timer to desired treatment time and then exit the space during treatment.
- Upon returning, make sure Timer dial is in the "Off" position.
- Allow 1 to 2 hours after treatment before re-occupying the space, or open the outside windows and doors upon reentry.