- Home
- Companies
- E-Z Weld Group LLC
- Products
- Model ENVIRO 206 - Pvc Cement
Model ENVIRO 206 -Pvc Cement
E-Z Weld ENVIRO Medium Body/ Clear is a medium bodied medium set PVC Solvent Cement. This cement is part of our Industrial Grade line of products. It is formulated to provide good gap filling properties. This product was formulated to provide cost effective cement for joining PVC pipes & fittings for up to 6” diameter, interference fit. When joining large diameter pipe & fittings the use of primers is highly recommended. Gray, Medium body, PVC Cements, 32° F - 110° F, SCH 40: Up to 6", SCH 80: Up to 4"
ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55°F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs.
32° F - 110° F
45° F - 110° F
3 years (unopened can)
Ensure adequate ventilation to avoid vapor build up which may cause flash fire. Vapor build up may also cause dizziness, headaches or eye watering. If symptoms are experienced use respiratory protection (NOISH/MSHA TC 23 c or equivalent) or leave are and provide more fresh air. Avoid contact with eyes, skin and clothing by use of safety glasses and gloves. Professionals should consult ASTM Standard F 402-93 Safe Handling of Solvent Cements, Primers and Cleaners Used for Joining Thermoplastic Pipe and Fittings. Professional users should also read the Material Safety Data Sheet for the product.
Flush eyes thoroughly with water for 15 minutes. Get immediate medical attention.
If breathing is difficult vacate to fresh air. If breathing problems persist seek immediate medical attention.
If swallowed give 1 or 2 glasses of water immediately, call physician, hospital or poison control immediately. DO NOT INDUCE VOMITING.
Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D2564
400PSI after2hour cure time at 73° F
500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
250 psi (2.76 Mpa) after 2 hour cure time at 73°F (23°C)
500 psi (3.45 Mpa) after 16 hour cure time at 73°F (23°C)
900 psi (6.20 Mpa) after 72 hour cure time at 73°F (23°C)